Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 01, 2016, 11:58:06 PM |
|
compared to the s7 heat output the output from the s5 is like a warm summer breeze.
Well with my laundry room set up heat and noise are not really a concern to me, but my electricity rates are so high here that I think the S5 is all I'm willing to pay for for this "hobby". After I move and see what the rates are like I'll look at the S7 (also after there is a used market for them). It's fun to me to have a pony in the race, even if it's just 1 vs. the herd.
|
|
|
|
|
leowonderful
Legendary
Offline
Activity: 1624
Merit: 1130
Bitcoin FTW!
|
|
March 02, 2016, 01:30:45 AM |
|
All day long! That is what I call a HEATSINK! what are the temps on that? It looks pretty good. I'd suggest you have one of those usb port splitters so you can mount it with the heatsink up. I got a heatsink for my block rupta off ebay. Certainly increased surface area and temps down heavy.
|
|
|
|
|
leowonderful
Legendary
Offline
Activity: 1624
Merit: 1130
Bitcoin FTW!
|
|
March 02, 2016, 12:43:22 PM |
|
S5s, amirite? That's a pretty good setup. I run my mixed s3/s5 rig outside my house in a shed. Temps stay way down as long as the ambient isnt too hot How hot it get down there? Looks like you have a pretty good way of cooling. Noise as well? I feel like I get way too excited on mining rigs. Theyre just SO interesting
|
|
|
|
Legacy2005
|
|
March 02, 2016, 02:15:11 PM |
|
S5s, amirite? That's a pretty good setup. I run my mixed s3/s5 rig outside my house in a shed. Temps stay way down as long as the ambient isnt too hot How hot it get down there? Looks like you have a pretty good way of cooling. Noise as well? I feel like I get way too excited on mining rigs. Theyre just SO interesting its in a basement so the noise is not to bad unless it gets warm then the fans get whiney. but they are set to 100% anyway on all the machines. 3 s5 4 s7 the s7s are the one with the tubes attached. all overclocked. the s5s are running at 412.5. 3 s7s are running at 731, with 1 running at 656 (batch 7). trying to eek out as much btc before the 1/2. its about 80ish down there which is more then i want, the miners are running mid/high 60s. would like to get them down to low 60s. Thinking of upgrading my "exhaust" fan to a larger one. looking at a 24inch barrel to move some of the hot air out of that area. also trying to upgrade tubing attached to the exhaust fan as that is just the tubing i pulled from the bathroom exhaust fan to help move some heat outside. will probably end up with a 4 inch tube vs the 3inch thats on there now.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
March 02, 2016, 03:23:45 PM |
|
S5s, amirite? That's a pretty good setup. I run my mixed s3/s5 rig outside my house in a shed. Temps stay way down as long as the ambient isnt too hot How hot it get down there? Looks like you have a pretty good way of cooling. Noise as well? I feel like I get way too excited on mining rigs. Theyre just SO interesting its in a basement so the noise is not to bad unless it gets warm then the fans get whiney. but they are set to 100% anyway on all the machines. 3 s5 4 s7 the s7s are the one with the tubes attached. all overclocked. the s5s are running at 412.5. 3 s7s are running at 731, with 1 running at 656 (batch 7). trying to eek out as much btc before the 1/2. its about 80ish down there which is more then i want, the miners are running mid/high 60s. would like to get them down to low 60s. Thinking of upgrading my "exhaust" fan to a larger one. looking at a 24inch barrel to move some of the hot air out of that area. also trying to upgrade tubing attached to the exhaust fan as that is just the tubing i pulled from the bathroom exhaust fan to help move some heat outside. will probably end up with a 4 inch tube vs the 3inch thats on there now. what fan settings did you use for the overclocked S7s?
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
Legacy2005
|
|
March 02, 2016, 03:27:57 PM Last edit: March 02, 2016, 03:41:14 PM by Legacy2005 |
|
what fan settings did you use for the overclocked S7s?
100%.. all 7 of the miners are at 100% the s5s have an extra stock fan on the back of them to help pull the air through. so it can get pretty loud at times.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 04, 2016, 09:02:36 PM |
|
The final setup will probably use the insulated tubing to connect the S5 to the vent and see if that makes it quieter as well.
My 3D printed ducts should arrive today, so I spent last night whipping up an insulated vent tube for the S5. I used standard 4" dryer ducting and some sticky foil-backed duct insulation. Adding this vent tube dropped the temp on the miner 1-2*C, I'm guessing the hot air wasn't getting out of the way fast enough without the tube and the hot air was backing up a little in the previous configuration.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 16, 2016, 06:11:57 AM |
|
My Avalon 6 in the same spot, using two 850w OCZ psus, one on each blade. Solo mining at the moment, 3.7TH of awesomeness.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1465
Clueless!
|
|
March 16, 2016, 06:24:12 AM |
|
Well expanded my setup by 100mh with 2 more Titan Cubes. Setup is 715mh KNC Titan Scrypt Miners (one was new Nov 2014 and one used march 2015 both mnfg Nov 2014) Anyway still making about 500 usd on LTC a month after electric. here is the link to all my pictures lostgonzo.imgur.comsigh..gonna miss 'home mining' when these become doorstops. I had it bad. Drank the Kool Aid (by the by recommend the 220v Tripplite Euro Surge Protectors...saved my equip 3x just an FYI) Searing
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
arklan
Legendary
Offline
Activity: 1778
Merit: 1008
|
|
March 16, 2016, 09:59:36 PM |
|
yea, it's fun, in a way i can't explain, to maintain a farm, set it all up, tweak everything ot keep it running, etc. i mean i only ever had a few USB sticks, but still!
i'll miss it.
|
i don't post much, but this space for rent.
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 16, 2016, 10:29:32 PM |
|
My 3D printed ducts should arrive today,
Oh, and here's an updated pict (before the A6 arrived) of my S5 with the 3D printed parts on (intake fan duct, top and bottom heat sink covers, I did not use the exhaust fan duct) and I added a pull fan. I also got some clear acrylic side covers because they are neat. At 400 freq and 60% fan setting it runs about 50-53*C.
|
|
|
|
fullzero
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
March 20, 2016, 03:06:25 AM |
|
Was looking at old miner photos today. Remember summer 2013?
|
|
|
|
arklan
Legendary
Offline
Activity: 1778
Merit: 1008
|
|
March 20, 2016, 04:21:28 AM |
|
Was looking at old miner photos today. Remember summer 2013? yea, was fun.
|
i don't post much, but this space for rent.
|
|
|
Jay_Pal
Legendary
Offline
Activity: 1493
Merit: 1003
|
|
March 20, 2016, 12:59:00 PM |
|
|
|
|
|
hurricandave
Legendary
Offline
Activity: 966
Merit: 1003
|
|
March 20, 2016, 03:49:28 PM |
|
|
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
|
March 23, 2016, 04:56:25 PM |
|
Wow, some nice setups in this thread. Here's my setup: - 1x Avalon 6 with Silverstone Strider Gold Evolution 1200W
- 2x Antminer S7 with 2x Bitmain APW3-12-1600 1600W
- 1x Antminer S2 with Enermax Revolution87+ 1000W
- 1x Antminer S1 with Super Flower Golden Green SF-500P14XE 500W
Shelf and a DIY soundproof cabinet: Closer look on the Avalon 6 and Antminer S2: 2x Antminer S7 inside the cabinet:
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 23, 2016, 06:53:12 PM |
|
- 1x Antminer S1 with Super Flower Golden Green SF-500P14XE 500W
Nice set up, but I hope the S1 is undervolted, otherwise I can't see why running a S1 today would be worth it. An S3 will use the same wattage as an S1.
|
|
|
|
|