aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
January 20, 2016, 06:48:18 AM |
|
My Antminer S5 seems to drop other board with these DDOSes and needs a reboot to get that board back online. Is it normal for Antminer S5 (sorry if this is a wrong place to ask)?
no its not normal.. post in the s5 thread your power supply and firmware version..
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
January 20, 2016, 06:54:52 AM |
|
My Antminer S5 seems to drop other board with these DDOSes and needs a reboot to get that board back online. Is it normal for Antminer S5 (sorry if this is a wrong place to ask)?
no its not normal.. post in the s5 thread your power supply and firmware version.. happened to 1 of my s7 too after hard reset it was ok. fw issue for sure.
|
|
|
|
PPKi
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 20, 2016, 08:13:01 AM |
|
As mentioned before, the RUU node went down. That was 16:43:46+00 UTC I've still not heard back from them, OK they're off the list of server suppliers to ever use again ( edis.at ) I redirected RUU to DE
Do you plan to setup RU node at another hosting? Thx.
|
|
|
|
usukan
Legendary
Offline
Activity: 1590
Merit: 1002
|
|
January 20, 2016, 08:41:32 AM |
|
EDIT #3: Found your address, CK, thanks to another pool member. Have a decent bottle of wine on me and thanks for all you and Kano have done and continue to do for the pool.
Thanks man. I'm an alcoholic coder so it's just what the doctor ordered. I'll be sure to stay on the ballmer peak. haha - this Ballmer peak seems to apply to many other tech and scientific disciplines. Its about applying a slight amount of imagination to a rigidly defined discipline. Otherwise called innovation via step change since the boundaries and the shackles have been loosened............
|
--
--
|
|
|
kano (OP)
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
January 20, 2016, 09:55:08 AM |
|
As mentioned before, the RUU node went down. That was 16:43:46+00 UTC I've still not heard back from them, OK they're off the list of server suppliers to ever use again ( edis.at ) I redirected RUU to DE
Do you plan to setup RU node at another hosting? Thx. Ah I forgot all about explaining what happened with this! Firstly, the DE node is now all stable. Very nice numbers 1.05PH/s 93.8 SPS 70 users 378 workers
'Tuning' some system settings has resolved it's problems. In the process, I also upgraded it to double everything so it's now quite a good (more than necessary) remote node as far as power goes. 12 hours after the RUU node died, I finally got a reply back from them and they'd 'fixed' it (including shutting it down ... why? I've no idea) So I'm reticent of pointing anyone back at it. 12 hours is, well, unbelievable IMO. Someone else has given a lead for another provider in RUU that I'll look into within the next day. Lack of much sleep over the last 2 days has me not wanting to make decisions about such things when I'm tired I'll look into it in the morning (it's 8:55pm here now) -- Also, been more payouts in the last 24 horus: Payout 393915 sent f4a29117840f4569a0833db6d2ec3b5e4abad2a2b2091797c537778fd7eab368 Payout 393929 sent 9c36fdc9cbd7a4391fde5998f1fb178035e653f67767963717ef03358814be25 Payout 394030 sent cb7deab1568cc7df99e11885a57c4e07db76f77dd7c95a79bd7271de76e73327 all confirmed.
|
|
|
|
kano (OP)
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
January 20, 2016, 09:58:58 AM |
|
Whatta heck Kano. I'll send you a 'Thank you' also. Done. 0.1BTC headed your way. Woo Thanks! I'll save this for when I finish the current bottle ... takes me a few weeks. I don't get balmer peaks or troughs coz I don't drink a lot
|
|
|
|
kano (OP)
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
January 20, 2016, 10:16:34 AM Last edit: January 20, 2016, 10:37:39 AM by kano |
|
... Ah I forgot all about explaining what happened with this! Firstly, the DE node is now all stable. Very nice numbers 1.05PH/s 93.8 SPS 70 users 378 workers
'Tuning' some system settings has resolved it's problems. In the process, I also upgraded it to double everything so it's now quite a good (more than necessary) remote node as far as power goes. ... OK well I posted that too soon I'm taking the DE node down. It's started having problems less than 2 minutes after that post. Sorry about that, I'll inform once things are sorted out.
|
|
|
|
BannedDK
Member
Offline
Activity: 109
Merit: 10
|
|
January 20, 2016, 11:09:19 AM |
|
Kano Can you compare my asic tubes with the other ones we got here? I find it kinda Odd that my old tubes Are the ones with the lowest invalids of all the miners i got. Old stuff must be good The port for asictubes goes through a proxy which sanitises the crap that comes out of those tubes. It may seem that you have low invalids but that's because the proxy has removed all their crap. I don't even know if you can monitor them internally to see what the local invalid reported rate is but it will be higher than what you see on the pool. Thanks for the info Ck
|
|
|
|
pay50online
Newbie
Offline
Activity: 3
Merit: 0
|
|
January 20, 2016, 11:12:15 AM |
|
THANK YOU! BTC
Also, been more payouts in the last 24 horus:
Payout 393915 sent f4a29117840f4569a0833db6d2ec3b5e4abad2a2b2091797c537778fd7eab368
Payout 393929 sent 9c36fdc9cbd7a4391fde5998f1fb178035e653f67767963717ef03358814be25
Payout 394030 sent cb7deab1568cc7df99e11885a57c4e07db76f77dd7c95a79bd7271de76e73327
all confirmed.
|
|
|
|
p3yot33at3r
|
|
January 20, 2016, 02:18:29 PM |
|
I'm taking the DE node down.
It's started having problems less than 2 minutes after that post.
Sorry about that, I'll inform once things are sorted out.
Damn, that DE node was perfect for me up until the problems started.....
|
|
|
|
stonebone
Newbie
Offline
Activity: 45
Merit: 0
|
|
January 20, 2016, 02:22:53 PM |
|
I'm taking the DE node down.
It's started having problems less than 2 minutes after that post.
Sorry about that, I'll inform once things are sorted out.
Damn, that DE node was perfect for me up until the problems started..... Same here.
|
|
|
|
scopus
Newbie
Offline
Activity: 15
Merit: 0
|
|
January 20, 2016, 02:52:38 PM |
|
Question. Today when stopped working DE and EN (ping 30 and 50). In my stratum.Kano.it:3333 (ping 220) Hash Rate has increased. Why?
|
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
|
January 20, 2016, 04:19:25 PM |
|
My Antminer S5 seems to drop other board with these DDOSes and needs a reboot to get that board back online. Is it normal for Antminer S5 (sorry if this is a wrong place to ask)?
I had problems similar with two of my S5. They would completely stop hashing and drop off the network just about every time there was a DDOS. I updated to the latest firmware and they've been chugging along about a week now with no issues. *knock on wood*
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
January 20, 2016, 04:53:54 PM |
|
My Antminer S5 seems to drop other board with these DDOSes and needs a reboot to get that board back online. Is it normal for Antminer S5 (sorry if this is a wrong place to ask)?
I had problems similar with two of my S5. They would completely stop hashing and drop off the network just about every time there was a DDOS. I updated to the latest firmware and they've been chugging along about a week now with no issues. *knock on wood* what is the latest S5 firmware that you have used?
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
chinesebob
Newbie
Offline
Activity: 64
Merit: 0
|
|
January 20, 2016, 04:58:08 PM |
|
Just got my first S7 in, anything special I should configure for CKPool? Any other tips for an S7?
|
|
|
|
elduderino
Full Member
Offline
Activity: 143
Merit: 100
Using some expensive heaters
|
|
January 20, 2016, 05:13:25 PM |
|
Just got my first S7 in, anything special I should configure for CKPool? Any other tips for an S7?
Use hosting. j/k... Just be sure and give it a proper PSU with all the power connections. AFAIK, the usual pool settings should work. Got mine at 575 MH w/ 30% fan speed to try to cut down on the noise... Other than that, you should be GTG.
|
Do the things you know you must do first, then worry about the stuff you're not sure about.
|
|
|
SergES
Member
Offline
Activity: 81
Merit: 10
|
|
January 20, 2016, 05:44:33 PM |
|
What happen for de.kano.is? Not connected.
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
|
January 20, 2016, 05:47:40 PM |
|
What happen for de.kano.is? Not connected.
This:... Ah I forgot all about explaining what happened with this! Firstly, the DE node is now all stable. Very nice numbers 1.05PH/s 93.8 SPS 70 users 378 workers
'Tuning' some system settings has resolved it's problems. In the process, I also upgraded it to double everything so it's now quite a good (more than necessary) remote node as far as power goes. ... OK well I posted that too soon I'm taking the DE node down. It's started having problems less than 2 minutes after that post. Sorry about that, I'll inform once things are sorted out.
|
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
|
January 20, 2016, 05:55:50 PM |
|
My Antminer S5 seems to drop other board with these DDOSes and needs a reboot to get that board back online. Is it normal for Antminer S5 (sorry if this is a wrong place to ask)?
I had problems similar with two of my S5. They would completely stop hashing and drop off the network just about every time there was a DDOS. I updated to the latest firmware and they've been chugging along about a week now with no issues. *knock on wood* what is the latest S5 firmware that you have used? File system: Wed Jul 15 15:36:15 CST 2015 SD-S5-20150715-fan_ctrl.tar.gz https://www.bitmaintech.com/files/download/SD-S5-20150715-fan_ctrl.tar.gz
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
kano (OP)
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
January 20, 2016, 07:51:06 PM |
|
What happen for de.kano.is? Not connected.
This:... Ah I forgot all about explaining what happened with this! Firstly, the DE node is now all stable. Very nice numbers 1.05PH/s 93.8 SPS 70 users 378 workers
'Tuning' some system settings has resolved it's problems. In the process, I also upgraded it to double everything so it's now quite a good (more than necessary) remote node as far as power goes. ... OK well I posted that too soon I'm taking the DE node down. It's started having problems less than 2 minutes after that post. Sorry about that, I'll inform once things are sorted out. Yeah the earlier problems were all resolved with remote nodes with the system settings fix. However a new one appeared that was rather more problematic so I had to take the DE node down. Not sure how long that will be. I've redirected all the DNS back to the main node until it's sorted out.
|
|
|
|
|