dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2015, 08:46:25 PM |
|
Do you have a Canadian reseller with known stock? Great price, but importing one will kill me
Resellers are unofficial, as anyone can be a reseller. Best bet is a having a good google to see who is listing in CA, then posting here so other members can backtrack or vouch for their legitimacy.
|
|
|
|
IITravel01
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2015, 10:24:05 PM Last edit: January 11, 2015, 03:15:32 AM by IITravel01 |
|
Here's my experience with the 2 S5's (batch 2) I received yesterday. Got it unpacked and hooked up and turned on I thought "Oh, hell no!" No way those fans can make this a home miner unless you're talking about keeping them in the Silence of the Lambs basement. Switched to the Silverstone 141 fans on performance mode (1,920RPM is a loud woosh over the scream of the OEM fan) and put them in the back in a pull setup. Turned on and they quickly shot up to 79 degrees Celsius, tried at 312.5M and they stayed at 79. Turned them off and moved the fans to the front (fits fine if you use a bootless network cable) in a push setup, turned them on and they started going up past 70 again, so set the miners at 312.5M and waited. They settled at 70-74 degrees C according to GUI, in a room that's about 75-80 degree F with 0 HW errors. I can handle that, each is hashing about (1,025 GH/s avg.) that's about what my C1 did (1,005 GH/s avg.). Need to get some readings with the Kill-A-Watt today to see how much power it's drawing at 2 x 312.5M.
Here's a little update, so at night the room with little ventilation would get too warm (in the 90's F) and the miners would get too hot, so I added a pair of these fans http://www.amazon.com/gp/product/B0078IWSBG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 that run at 1,320RPM to the rear in a push pull setup and it drops the temps on the S5's down 4 degrees C. Wanted to go with another pair of the Silverstone 141's but the case they're in won't allow due to space so these fit and work well with the 141's in the front and these in the back. Upping the freq. to 325M on both brings the Gh/s avg. to about 1,070 ea. (about 1,050 avg. on the pool site) and the wattage at the wall on 230v to 1,100w with temp. at about 69 C (in a room at about 83 F).
|
|
|
|
Darthswan
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2015, 11:17:04 PM |
|
I keep reading that these machines run warmer. What is acceptable? I currently have my miners in my basement and one of the windows is cracked down there. Temp is around 67 degrees. Since nobody spends time down there it's not an issue.
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 12:19:19 AM |
|
The test unit also seems to cut out at 9.45V @ 200MHz even if I start at a higher voltage, and 9.75V @ 250MHz.
If anyone else has had any luck starting these at 10V or under I'd be interested in hearing it.
Interesting. How did you decide to use those frequency numbers? I would imagine that at a lower voltage it may be necessary to reduce the frequency at a lower rate.
|
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 12:33:20 AM |
|
The test unit also seems to cut out at 9.45V @ 200MHz even if I start at a higher voltage, and 9.75V @ 250MHz.
If anyone else has had any luck starting these at 10V or under I'd be interested in hearing it.
Interesting. How did you decide to use those frequency numbers? I would imagine that at a lower voltage it may be necessary to reduce the frequency at a lower rate. I just made a matrix with frequency in 12.5Mhz steps and voltage in 0.5v steps, and measured voltage, current and hash rate.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 12:53:20 AM |
|
I have been looking at miner link on the S5. I could use a little help if possible.
Looking at it is the UID is your Bitmain email on account?
Also on Server Addr what should it be set to?
Thanks for any help.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8388
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 01:06:35 AM |
|
The test unit also seems to cut out at 9.45V @ 200MHz even if I start at a higher voltage, and 9.75V @ 250MHz.
If anyone else has had any luck starting these at 10V or under I'd be interested in hearing it.
Interesting. How did you decide to use those frequency numbers? I would imagine that at a lower voltage it may be necessary to reduce the frequency at a lower rate. I just made a matrix with frequency in 12.5Mhz steps and voltage in 0.5v steps, and measured voltage, current and hash rate. can you dial down volts as the gear is running? if you can try start at freq 150 using 10.5 volts and dial down to 9.75 then 9.5 then 9.25 then 9
|
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 01:20:40 AM |
|
The test unit also seems to cut out at 9.45V @ 200MHz even if I start at a higher voltage, and 9.75V @ 250MHz.
If anyone else has had any luck starting these at 10V or under I'd be interested in hearing it.
Interesting. How did you decide to use those frequency numbers? I would imagine that at a lower voltage it may be necessary to reduce the frequency at a lower rate. I just made a matrix with frequency in 12.5Mhz steps and voltage in 0.5v steps, and measured voltage, current and hash rate. can you dial down volts as the gear is running? if you can try start at freq 150 using 10.5 volts and dial down to 9.75 then 9.5 then 9.25 then 9 Mine didn't get down to 9v even at 100
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 01:58:08 AM |
|
I have been looking at miner link on the S5. I could use a little help if possible.
Looking at it is the UID is your Bitmain email on account?
Also on Server Addr what should it be set to?
Thanks for any help.
I see the UID is email registered. Any help on Server Addr? My miner link will not turn on I'm sure I'm doing it wrong.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 05:10:14 AM |
|
I have been looking at miner link on the S5. I could use a little help if possible.
Looking at it is the UID is your Bitmain email on account?
Also on Server Addr what should it be set to?
Thanks for any help.
Its not quite ready yet, more info will appear here once its ready.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 05:10:36 AM |
|
I keep reading that these machines run warmer. What is acceptable? I currently have my miners in my basement and one of the windows is cracked down there. Temp is around 67 degrees. Since nobody spends time down there it's not an issue.
<65 much preferred, <60s are good.
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
BTCLife.global participant
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 06:11:34 AM |
|
If you find any combination of things that help with either/both noise and reported temp, please let us know. I've ordered a couple S5 and plan to try S3 fans and homemade covers. My environment gets very warm in summer.
https://bitcointalk.org/index.php?topic=919018.msg10095261#msg10095261Now it's about 10 hours S5 is running with replaced fan, and it's almost silent (especially comparing with stock fan). Temps are 76 and 72 C, but HWE is about 0.0196%. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fsnag.gy%2FqUxiZ.jpg&t=665&c=LWmVLltJsDwA7w) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fsnag.gy%2FqJvdD.jpg&t=665&c=_t6fUEKzHxA5yA)
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 06:19:52 AM |
|
I have been looking at miner link on the S5. I could use a little help if possible.
Looking at it is the UID is your Bitmain email on account?
Also on Server Addr what should it be set to?
Thanks for any help.
Its not quite ready yet, more info will appear here once its ready. Thank you very much for info.
|
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 06:29:52 AM |
|
@philipma1957 Please check your Bitmain Account for the updated coupon counts!! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Are there any s-5 coupons? I saw something about s-5 coupons can't find it now.
Yes their are S5 coupons for customers who bought early … Bitmain trying to draw in repeat customers after being burned by bitmain lowering the price . Bitmain needs to come up with a different way to reward past customers because the coupons are becoming more of an insult if anything . I used a few coupons on the s-3's . I gave a quite few away. I sold a couple of s-3 coupons very cheaply. I would not mind someone tossing 2x s-5 coupons at my bitmaintech account . my name there is philipma1957
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
BTCLife.global participant
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 08:01:46 AM |
|
What kind of thermal compound is used during S5 assembling? I have Arctic MX-4 and AlSil-3 and I want to try to replace thermal interface and see what it will lead to...
|
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 10:13:04 AM |
|
As long as it is non-conductive version, it will work!! Also, PM sent, ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Thank you What kind of thermal compound is used during S5 assembling? I have Arctic MX-4 and AlSil-3 and I want to try to replace thermal interface and see what it will lead to...
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 12:25:04 PM |
|
BTW, is anyone able to compare the noise to an S4 please? I have an S4 and had to find another location for it. I had my neighbour knocking on my door asking what the hell the noise was and saying that he could not sleep with it (we both are in separate houses and his bedroom is about 50 meters away from my house). I have seen reports of the S4 between 70 and 90 db but not sure how accurate they were. It would be great if someone could do a test using the same metering device at the same distances for testing both.
Almost identical to the S4. ... Which metering device did you use? What where the values? Dogie did not respond to you. If dogie have some Sound Level Meter, then you have already read it from dogies review.
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 12:44:29 PM |
|
What kind of thermal compound is used during S5 assembling? I have Arctic MX-4 and AlSil-3 and I want to try to replace thermal interface and see what it will lead to...
To make water-cooled S5 I used MX-2 http://www.arctic.ac/eu_en
|
|
|
|
Stratobitz
Legendary
Offline
Activity: 1022
Merit: 1010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 03:08:50 PM |
|
Is it ok/safe to run a single unit using 3 cables that have double 6 pins? 8 pin to dual 6 pin.
I was hoping I could run 1 dedicated cable to each blade, then use the 3rd cable and split it between both blades.
The Corsair CM850 only comes with 3 cables.
Thoughts?
Strato
|
|
|
|
Stratobitz
Legendary
Offline
Activity: 1022
Merit: 1010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2015, 03:14:38 PM |
|
Ordered a S5, paid it, batch 4 which should be sent out on January 12. Price paid: 401 USD. Now advertised on the Bitmain-site: S5, batch 4, should be sent out 12/1: 358 USD. So basically, by paying early, I get ripped off by Bitmaintech of 43 US$?
Nice move. Really nice move.
In case you haven't noticed, stores (of all kinds, everywhere) change the price of their products constantly. Why should Bitmain be any different? When did they make any price guarantees? Is this so? Never noticed this before, thanks for mentioning it. Amazon is one store that changes their prices... daily. I just bought something x 10 from there yesterday and today the price dropped by US$6.34... that's US$63.4..... Was rather pissed. Should have waited. But then, there was once I waited and the price went up... grrrrrrr~ If that happens and it's a large enough amount to make a fuss - just email support and they will credit the difference. If they don't just order the item again... issue a return for the item you already have, then return the item that comes in (new one) as the old (more expensive one). I bought an item that dropped $500 between order and 2 day prime delivery. Did that. Strato
|
|
|
|
|