Hello everyone,
I am interested to buy a Griedseed in Europe, do you have any suggestion where can i buy.
Thank you.
I have a few 5Mh Gridseed blades |
|
|
|
My last one: - Paid Friday 28th Nov 1AM
- Confirmation Friday 1:30AM
- Shipped email Sunday: 3PM
- Picked up Tel Aviv Sunday 11PM
- Currently in UK customs since Tuesday 1AM
i presume you paid via bank tx? Nope [edit] 28th not 20th sorry  ha! gotcha, wondered how a btc tx would take so long! it should be delivered today then DHL say Wednesday, which gives me time to get some new fans SP31 should be delivered same day |
|
|
|
My last one: - Paid Friday 28th Nov 1AM
- Confirmation Friday 1:30AM
- Shipped email Sunday: 3PM
- Picked up Tel Aviv Sunday 11PM
- Currently in UK customs since Tuesday 1AM
i presume you paid via bank tx? Nope [edit] 28th not 20th sorry |
|
|
|
My last one: - Paid Friday 28th Nov 1AM
- Confirmation Friday 1:30AM
- Shipped email Sunday: 3PM
- Picked up Tel Aviv Sunday 11PM
- Currently in UK customs since Tuesday 1AM
|
|
|
|
used raskul's link
thanks phil, looks like those block tx fees at mmpool are gonna be all yours for the foreseeable.  i'll have some catching up to do. very much appreciated that you used my link again... when biffa's is far prettier  LOL but you have a much better story than me   |
|
|
|
Interesting news  . http://www.coindesk.com/spondoolies-tech-ceo-talks-new-asics-blockchain-lottery-device/Spondoolies-Tech is currently working on two separate designs: a 28nm ASIC set to launch in early 2015, followed by fourth-generation chips manufactured using an unspecified FinFET node. Most cryptocurrency ASIC companies do not disclose their manufacturing partners and Spondoolies is no exception. Instead of describing the new chip as a 14nm or 16nm design, which would more or less identify the foundry, Corem prefers to use "advanced process" FinFET terminology.
...Corem indicated that Spondoolies has made a conscious decision to skip the 20nm node altogether. oooooh that is an exciting morsel  and completely backs up what I said months ago about 20nm being a stepping stone. i like it when raskul is always right Spondoolies-Tech's next-generation platform will not be suitable for home mining, however, as it will feature 10 hashing boards, each with its own PSU. Whoa! 10 power supplies! Interested to see what this will look like... one thing is for sure.. it's not going in my mum's garage! Under the bed then? |
|
|
|
Please tell us which machine failed in your case it looks like you had an sp30 or sp31 as for 2 day delay. fri and sat they are closed. I have the sp20 it is very good after 1 week so good I ordered 2 more.--------------I underclock mine to 760 watts and 1324 gh I use mmpool.org to mine I tested with btcguild and with westhash both good. It is important to let people know what is wrong and what is right about a company products. Its an SP30/1 he has had a power supply failure, so its only running at half speed (SP30 has two PSU's) wh00per I had a similar thing with one of mine, using email only it took a day or so of testing but they were quick to send out a new PSU. |
|
|
|
Your version does not recognise VPD as SP20. We will fix this, but in the mean-time there is a simple way to fix this:
1) ssh into the unit
2) type "echo SP2x > /model_id; echo SP20 > /model_name;"
3) Do FW upgrade (2.5.27)
Update me if this worked.
echo SP2x > /model_id; echo SP20 > /model_name; not found too many spaces between..? SP20 > /model_name; No. http://www.perearstike.ee/avatar/not.found.jpgDon't type the word "type" and don't put quotes around it either. At the command prompt just put: echo SP2x > /model_id; echo SP20 > /model_name; |
|
|
|
|
Looks fine to me, mined for 40 minutes, output matches whats seen on other pools and whats on the miner
|
|
|
|
Guys, I would need some of you to test how well a Spondoolies SP20 works on our pool NiceHash / WestHash. Could somebody please try to connect to our stratum for like a half an hour or so and see if hashrate reported on our site is the same as reported by miner? stratum+tcp://stratum.nicehash.com:3334 -u yourBTCaddress -p x stratum+tcp://stratum.westhash.com:3334 -u yourBTCaddress -p x When your miner successfully connects, take a look at the miner stats page: https://www.nicehash.com/index.jsp?p=miners&a=1&addr=enterYourBTCaddressPlease report if you have success because we have some customers interested in upgrading to SP20. Thanks! Forgot to add ... stratum.westhash.com if you are from USA / Asia and stratum.nicehash.com if you are from EU / Russia ... thx! testing stratum.nicehash.com from the uk |
|
|
|
At the end of the day, ROI is still king though. I can get 8.8 TH/s for 200$ more if I go with S4s, vs 4.9 TH/s.
I really don't mean to thread shit SP, and I hope that's not how this is coming across. I'm legitimately trying to justify an SP31 and I'm hoping for someone to weigh in. It won't take much to be honest, if only to treat myself to the crème de la crème of Bitcoin hardware.
For me its also about hosting costs, it would cost 3 times as much to host 2 S4's as it would to host 1 SP35 because they take up 4TH@6U vs 5.5TH@2U And 4.5 times as much for 3 of them 6TH@9U vs 5.5TH@2U |
|
|
|
|
What speed do you run them at? 450 or 500GH/s
Oh btw, miners down again 11 Hours and counting
|
|
|
|
|
Soo.. no opinion.. SP31 now or SP35 maybe at end of Dec...
What are most peoples SP31's running at? Anywhere near 4.9 on 210V?
|
|
|
|
Well I couldn't help myself. Buying another SP20 using the proceeds of old miner sales that have more than made their money back In return getting the same output but much lower power usage. Now.. for big boys toys.. seems to make sense to get the SP31 with immediate delivery right? Compared to the extra 500Gh but maybe 1 month later delivery of the SP35? |
|
|
|
I was specifically referring to barabara, who in the emails where i asked for a discount neglected to mention any sale and in fact advised me to buy asap...
would it not THEN have been logical to mention there is a sale starting imminently...?
OK, so will you (SPT) honor the 100USD discount seeing as my order is still 'pending & unfulfilled' $940.00 ?
Email guy and Katya they are normally pretty good about it |
|
|
|
|
Show Posts
