Feature request:
Add dual mining revenue under Coins and Online services for secondary coins.
Example:
Thanks for the suggestion. This could be an improvement for future versions.
|
|
|
Hi, I bought the Enterprise version. I've used it with different miners with no problems. Only mining with autoswitch that could not make it work in any way.
My doubt is: I use the NHML (Nicehash Mining Legacy). I installed the AM agent and tried to connect the miner, also ip, however unsuccessfully. How to make AM just see Nicehash mining?
I'm currently using AM just as a monitoring my rigs of which are managed by NHML 1.8.1.3
Thanks
I assume you are using External Miner concept in Awesome Miner to connect to the mining software started by the Nicehash mining software. In order for this to work, the mining software must have API enabled and you need to know on which port the Nicehash software uses for this. Once you found this information in the Nicehash software, it should simply be to connect to the IP and port from Awesome Miner. I have the API but it's from the website (it's just one API for all miners together) , local software do not have one, how can I insert this API in the AM software so that I can monitor my rigs? Awesome Miner can connect to the API's of the mining software (Claymore miner, Ccminer, ...) that is running on your mining rigs. Awesome Miner is not connecting to any website for this. If you use the Managed Miner concept in Awesome Miner, all this will work out of the box. If you want to use the Nicehash application to launch mining software and only monitor from Awesome Miner with an External Miner, you do need to make sure that the Nicehash software enables the API (and which port) on the mining software for Awesome Miner to connect.
|
|
|
My rig keeps crashing when doing autoprofit mining. I was previously mining etherium just fine. What could be the problem?
If you have your rig tuned to do Eth, then start it as a profit miner... when it changes to a different algorithm, the GPU settings could be wrong. Your over/underclocks for Eth could be the wrong settings for a different more stressful algorithm. Also, if you have your rig running on the edge of what your PSU can handle... you may be running into an issue with the PSU not being able to deliver enough power for a stressful algo based on your previous tuning for Eth. How many, and what kind of GPUs are you running? What PSU are you running? I am using 8x GTX 1070 with 1600 Watt EVGA plat PSU. I have restored the settings in msi and they are default with not OC. Not sure what the issue is I did notice that my CPU usage is very high around 70-80% when i was mining eth it was 30-40% Can you try to click the Diagnostics button to see if you get any additional information? Like what mining software is being selected, which algorithm and then the output from the mining software. It could be that your GPU/drivers/system isn't compatible with this mining software, and then it can be unselected from the profit switcher. The first step is however to use Diagnostics to figure out more details.
|
|
|
@dev : About Nicehash pool, if i switch to the pool by AM, the worker name is not take by Nicehash stats.... Bug, no in the feature, or problem from nicehash For example : IF i put worker name S9_1 in AM, no worker name in stats. If i use antminer webpage, it's OK. Have an idea ? I use minera 0.8.0 to run my miner. Could i also use AM to monitor and manage also remote control it?
No success with Minera and S9 for me. I prefer AM I know that some characters cannot be used when setting worker names on the Antminers over the management interface. Even if these may work directly in the web for the Antminer, it may not work as expected from external applications like Awesome Miner. I can't recall how the support for is for _ (underscore), but as a first try you could try to change from "S9_1" to just "S91" or similar.
|
|
|
does "awesome miner" support 2xasics(D3) in free version or does one need to upgrade to a paid version?
You can monitor 2 Antminer D3 with the Free Edition of Awesome Miner.
|
|
|
I've recently been getting many questions about Antminer D3 support in Awesome Miner. I works great since version 4.0.2 and several users have successfully verified this.
|
|
|
i have some suggestions for the coin tab:
-more stats like: -what hashrate number is used to calculate on that algo (my hashrate) -how much of that currency am i goin to earn? currently i only see btc and usd -maybe let us add or remove stats from view.
also the coin tab Shows very different results than whattomine. which one should i believe now?
Thanks for your feedback. WhatToMine uses 24h profitability by default, but can be changed to use current. Awesome Miner uses current profitability by default, by can be changed to use 24h (Options dialog, Statistics section). This is why what you see on the Coins tab may not be identical with WhatToMine unless you align the configuration.
|
|
|
Hi, I am currently using mpsw option for claymore and I dont see a way to enter password for remote management of claymore. I reviewed the docs/faq on the awesome miner site, but couldnt see a way to get that working. Probably something in this thread but tbh I havent read all the pages Thanks, You'd want to add options like this as a custom command line option in the managed software for Claymore. Of course I have it like this configured in the Claymore command line. Problem is how do I get the Awesome Miner app to connect to the below external miner with the PASSWORD set in -mpsw? Ethdcrminer64 -epool eth-us-east1.nanopool.org:9999 -ewal ETHWALLET -mpsw PASSWORD -mport PORT -epsw x -mode 1 -ftime 10 That kind of Claymore passwords are not yet supported by Awesome Miner.
|
|
|
hey, great programm so far but i think then Skein Hub on MPH isnt working correctly. My Rig is mining Skein atm which is currently the most profitable with 16 USD a day on MPH for my rig. In the Skein algo on MPH are 2 coins. Myriadcoin-Skein currently @ 0.14842 profit Digibyte-Skein currently @ 0.06922 profit so it calculates that when i mine the myriadcoin version i get 16 dollars a day But now the Problem. Everytime when it swtiches to skein it ONLY mines digibyte-skein but calculates the profit for mining myriadcoin. I figured that out caus i check the hashrate 0 Hashrate on myriadcoin and 2240 MHS on Digibyte which is way less profitable of course. Anway to fix that or have i to disable skein till this is fixed somehow?
thx!
Is this with the Awesome Miner profit switcher, or a Managed Miner where you simply point to a specific MPH pool? If it's a specific MPH pool, please let me know the full URL incl. port number. If it's a multi-coin pool at MPH, Awesome Miner will never know which coin you are mining or what kind of coins MPH switches between. Instead Awesome Miner displays the profit information from MPH for this scenario and that should be correct.
|
|
|
Hi, is there any solution about Ewbf 0sol? the miner does not restart with this error What kind of problem is that? Are other mining software working on you system? Can you please share more details.
|
|
|
Hey Patrike!
Any way of splitting the revenue streams for each individual coin when dual mining using Claymore's Miner?
Example:
Per day (ETH + DCR): $12 ($10 + $2) Per month (ETH + DCR): $360 ($300 + $60)
Would be cool visualizing profitability for each coin.
Hi! Thanks for the suggestion. I agree that this would make sense
|
|
|
Awesome Miner only supports a number of Block Explorer API, but not that one. The problem is that these API's can be very different, making it almost impossible for Awesome Miner to support all. A large number of coins are supported via this one: https://chainz.cryptoid.info/However, Signatum is not in that list. Given the fact that Signatum is quite popular, I will consider adding specific support for it. Thanks for your feedback on this. Is the only API function for the balance getbalance? If so, why not just make it so we input the specific api url for getbalance I'm going to want VIVO too. http://vivo.explorerz.top:3003/Hi, The format of the responses from all these Block Explorers are different, so it's not as easy as just make a request to them. I've been thinking of developing some way of expressing how Awesome Miner should process these results to give the user full flexibility to point to any Block Explorer and simply instruct Awesome Miner where in the result the actual balance can be found, but it will be a little complex and intended mainly for the power users.
|
|
|
Awesome Miner version 4.0.2
- Antminer D3 supported - Support IP address variables in the Worker name field of the Pool Properties. - Added Philippine Peso as display currency
This release is focusing on the Antminer D3 support. I know many users started to get their D3 deliveries today.
|
|
|
Thanks for your work. Are the Innosilicon A5 going to be supported?
Innosilicon A2 is supported. I don't know about A5 yet, but as soon as someone gets their hands on it and send me an API report, I can either verify that it's working or make adjustments to make it work.
|
|
|
Awesome Miner only supports a number of Block Explorer API, but not that one. The problem is that these API's can be very different, making it almost impossible for Awesome Miner to support all. A large number of coins are supported via this one: https://chainz.cryptoid.info/However, Signatum is not in that list. Given the fact that Signatum is quite popular, I will consider adding specific support for it. Thanks for your feedback on this.
|
|
|
Antminer D3 information I've just received the first reports on Antminer D3 and the bad news is that it doesn't work out of the box with Awesome Miner due to some non-standard API changes introduced by Bitmain.
The good news is that I will most likely be able to adjust Awesome Miner to handle this, so unless I run into any more unexpected behaviors of the D3, I will have a new release of Awesome Miner with D3 support available within the next few hours.
|
|
|
I can add PHP as a display currency for the next release. Thank you very much. How about the other question.. Coins.ph is my exchange wallet. and they have their own rate. Can Awesome miner get the rates from there? No. Right now it will get the exchange rate from Coinbase or Bitstamp only
|
|
|
I can add PHP as a display currency for the next release.
|
|
|
What can I do with it???
And this from my phone...
I resolved that earlier today. Unfortunately there have been some issues on the Amazon environments where Cloud Services are hosted. I've identified and made a workaround for this earlier today, and gave feedback to Amazon what they should look into.
|
|
|
would love to see temperature threshold warning -- say x% higher than average for all GPUs in a rig (or same type of GPU) and turn this GPU temp "red" in the My Miners screen. i know there are temp settings configured in device profiles but just want easier way to see an "out of control" miner in the My Miners tab.
The concept of comparing with average temperature is not supported (but I agree that it would be great!), but if you define a trigger on a specific threshold, you can have an action of the type Highlight Miner. Using this one you can get the miners in the Miner tab to get blue / yellow / red background to visualize any issues.
|
|
|
|