|
Awesome Miner version 3.0.1 is a minor update with the following improvements:
- Dashboard improved with temperature display
- Corrections to pool management for Ethereum dual mining
- Claymore's Ethereum Miner 9.4
|
|
|
|
Thanks for the information. Could you also select the miner and generate an API report for it? From the toolbar: Tools -> API report.
Also, the API of the Excavator minor has changed in the latest release, and even in there, it says that the API is just in the early state and will be changed.
Based on your API report, I will see if this can be solved from an Awesome Miner point of view. Otherwise we simply have to wait for the new Excavator API to stablize.
Api Report only says : Version: 2.9.6
API command: status
Hope that helps. Hi, There were actually a problem with the API report feature itself, so it didn't return all information. Can you send me a new API report once you upgrade to the new Awesome Miner 3.0? Thanks |
|
|
|
With the new version, both ETH and DCR coins can no longer be selected for association with the pool(s).
I'm a little dissatisfied with the remote management capability for my Dual Miner. I followed the HELP screens and two things happened:
1) within the defined POOL GROUP, one of the pools is shown as disabled while the other is enabled. I cannot select from the buttons to enable the pool
2) the mining accept / reject metrics are reversed. Watching my console window, I see that accepted shares are associated with the wrong pool that just so happens to be enabled.
Thanks for reporting this. I did find a problem in "Define coin" for the secondary coin when using Claymore's Ethereum miner, and it might the issue you experience. 1) The operations Enable/Disable pool have never been supported for Claymore's miners because of limited API. Awesome Miner has always showed the additional (non-active) pools for Claymore Ethereum as disabled, but I agree that this is confusing because they are not really disabled. I will look into that. 2) I cannot reproduce the problem with accept / reject. It looks fine on the miners I have. Can you please select the miner reporting incorrect information, and send me the API report for it? Go to the toolbar: Tools -> API report. Thanks! |
|
|
|
Awesome Miner 3.0Awesome Miner 3.0 feature highlights: • Profitability Switching ○ Easy to use profitability switching feature that supports switching between all popular mining software and algorithms. Just enter your Bitcoin address and get started. ○ Multiple profit switching profiles to manage profitability switching across a wide range of miner configurations ○ Supports NiceHash, Zpool and any custom pool where the coin being mined is known • GPU Mining ○ Large scale GPU overclocking and configuration settings for remote systems without dependency on mining software having to run ○ Display of GPU and CPU monitoring (temperature, clock, load and more) from remote systems without dependency on mining software having to run ○ Mining software versions for automatic download can be updated without upgrading to a new version of Awesome Miner ○ Scan for Awesome Miner Remote Agent installations on the network and configure all of them for standard mining or profit switching ○ EWBF Zcash miner (nVidia GPU) and beta-level support for Excavator (nVidia GPU) • ASIC Mining ○ Show ping information for disconnected External Miners ○ Set default pools for Antminer ○ Antminer L3+ supported • User interface ○ More display currencies supported. In addition to USD, an additional 11 currencies are now included. ○ Display of exchange rates in the status bar for the 5 most popular coins ○ Usability improvements in the configuration dialogs and wizard • Rules ○ Rules can be applied to a miner group in addition to multiple miners ○ New rule to trigger based on pool URL • Many general improvements Instructions how to use the new profit switching feature: http://www.awesomeminer.com/help/profitswitching.aspxInformation on upgrading: • Awesome Profit Switching was previously defined as a rule. Awesome Profit Switching has been renamed to External Profit Switching as is now enabled per External Miner. The general settings for External Profit Switching are located in the Options dialog, Profit Switching section. • Algorithm hashrate settings was previously defined as a factor with relative numbers between algorithms. This has been replaced by a concept where hashrate is specified. In addition, multiple Profit Switching Profiles can be defined to support different kinds of devices. • Downgrade is not possible. After upgrading to Awesome Miner 3.0, it's not possible to downgrade to 2.4 without all settings being lost. Do not install version 2.4 after running version 3.0. Happy mining!
|
|
|
|
HI____i were given mrr setup with a concern zero, all of the different pool are at 1 ( income switching pool and that i brought mrr )
now on my setup for my x-algo rigs, it all works quality. however for my scrypt rigs ( walking grdseed-black with bfgminer four.10 )
evertime i look, remarkable Miner disabled (disabled in black writing, not dead in purple ) my mrr pool, ( mrr is alive and i've 3 failover pools in there ) and i need to both re-permit it or restart the miner.
what offers .? i would have to run the ones suckers in MinerControl or their crappy chinease Rasb PI UI till i will figure out the problem, all other swimming pools run first-rate and swithches base on income.
please permit me realize.
Hi, I'm not sure if I really understood what the problem was here. Could you please send me a screenshot? |
|
|
|
I am not sure if you want user suggestions or not?
In case you do, I have suggestions on the UI that I'd love to see:
I appreciate this kind of feedback very much. I'm taking notes of all the feature requests I get, in order to improve Awesome Miner even more. The most popular feature requests typically get implemented first, but I'm keeping track of all requests I get. Many thanks for these suggestions! 2)
It would be cool in the default "Miners" view to be able to re-arrange the columns and/or choose what the columns display.
For example, the default is:
Description, Status, Progress, Speed, Coin Total per day.
I'd love to be able to rearrange those columns (and turn them off/on) as well as in the Coin Total per day to change it to month or what not. Or to be able to separate "Status" and "Temperature" into two columns that I can then put where I want. Or to have separate columns for Speed and Average speed (so I could turn average off if I wanted).
Have you checked out the feature to customize the Progress field? It doesn't solve everything you list above, but it gives you a way of customizing what information to display: http://www.awesomeminer.com/help/customizefield.aspx3) I know you have some "tint" themes available but I'd also love a full inverse "black" theme (like ethermine.org's colors) because when working at night a negative image is so much easier on the eyes (especially with the miner's all in black - the awesome miner window is too bright!  ). I know you have done this on the dashboard and it looks GREAT in those colors! It just doesn't display enough of the information I want to see (temperatures especially) so I find myself defaulting to the Miners tab instead of the Dashboard tab. In addition to the dark theme request, I should probably add temperature to Dashboard. I've had that request before. |
|
|
|
Is there some guide what I can manage on my Antminer L3+?
I know I can add it as "External Miner" and see it hashing incl. stats - is it also possible to reboot it remotely or something like that?
This is a very good question, and it would probably be a good idea to document this in a better way. Antminers typically support all features you see in the user interface in Awesome Miner. You can also do reboot via SSH, but you need to define a custom rule for this. Go to Options dialog, Rules section, Add a user defined rule. Give the rule a name like "Reboot Antminer". Don't define any triggers, instead you check "Support manual activation". Then you define a single action of type SSH, where you need to specify username and password to your Antminer, and make sure that the command is set to "Reboot system". Default SSH username/password for Antminers are typically: root/admin When you save this rule you will find a new button in the toolbar of the main window called Actions. When you add rule with Manual Activation, those rules will be displayed in the Actions menu. Now you have access to a reboot feature for all the Antminers you select. Hi Patrike, I'm fairly computer illiterate. is it possible to have a antminer automatically reboot if its hash rate drops below a certain level? Thanks That's fully possible using the Rules in the Options dialog of Awesome Miner. Define a new User Rule like this where you will trigger on hashrates lower than 7 TH/s. It checks both the current hashrate an the hashrate two minutes ago. When both conditions (triggers) are met, the Antminer will be rebooted. Select "Match all" for the triggers Trigger 1: Check statistics trigger - Hashrate kH/s - Current - Compare operation: Less than or equals - Compare with: 7000000000 Trigger 2: Check statistics trigger - Hashrate kH/s - Two minutes ago - Compare operation: Less than or equals - Compare with: 7000000000 Action: SSH - Enter username, password and make sure the command is set to Reboot. |
|
|
|
Thanks for your comments. The Excavator miner reporting is very very limited at the moment. This is because the API of this miner doesn't provide much information at all at the moment. I've already written to the developers of this miner and ask for more, and they are planning to improve their API in the Excavator 1.2 release. As soon as the Excavator mining software improves in this area, I will make sure the information will be presented in Awesome Miner. You can try to use the very latest feature on the GPU tab called "Map to system monitoring", to get a bit more GPU information by using what Awesome Miner can find. I will also try the -ca parameter case you reported to see if it can be solved from Awesome Miner. I will get back to you on that one. For the Managed Profit Switcher, you should be able to configure this via the Profit Profiles. So go to Options dialog, Profit Profile section, edit for example the AMD GPU profile, select Ccminer in the list and click Configure. In this dialog you should be able to point to custom software path. If you have a larger number of miners, it could make sense to use this feature to upload the mining software to all miners first: http://www.awesomeminer.com/help/uploadsoftware.aspxThx for your answers, i'll wait for next Excavator release to have full reporting, and i'll try the custom software path to enable tpruvot ccMiner 1.7.6. Thx. Here is a capture of what i get when i add a second thread to excavator (-ca parameter) on a 6 GPU rig : It reports twice the number of GPU, and "Map to system monitor" only maps the first 6... Speed is also splited across duplicates, each card should have been around 428H/s. Hope that helps. Thanks for the information. Could you also select the miner and generate an API report for it? From the toolbar: Tools -> API report. Also, the API of the Excavator minor has changed in the latest release, and even in there, it says that the API is just in the early state and will be changed. Based on your API report, I will see if this can be solved from an Awesome Miner point of view. Otherwise we simply have to wait for the new Excavator API to stablize. |
|
|
|
Is there some guide what I can manage on my Antminer L3+?
I know I can add it as "External Miner" and see it hashing incl. stats - is it also possible to reboot it remotely or something like that?
This is a very good question, and it would probably be a good idea to document this in a better way. Antminers typically support all features you see in the user interface in Awesome Miner. You can also do reboot via SSH, but you need to define a custom rule for this. Go to Options dialog, Rules section, Add a user defined rule. Give the rule a name like "Reboot Antminer". Don't define any triggers, instead you check "Support manual activation". Then you define a single action of type SSH, where you need to specify username and password to your Antminer, and make sure that the command is set to "Reboot system". Default SSH username/password for Antminers are typically: root/admin When you save this rule you will find a new button in the toolbar of the main window called Actions. When you add rule with Manual Activation, those rules will be displayed in the Actions menu. Now you have access to a reboot feature for all the Antminers you select. Thank you! This is working fine! So I can create some kind of watchdog if the miner is hashing at reduced speed and initiate a reboot. Yes - it's fully possible to both define triggers and at the same time use "Support manual activation" to let you manually execute the SSH action when needed. |
|
|
|
Is there some guide what I can manage on my Antminer L3+?
I know I can add it as "External Miner" and see it hashing incl. stats - is it also possible to reboot it remotely or something like that?
This is a very good question, and it would probably be a good idea to document this in a better way. Antminers typically support all features you see in the user interface in Awesome Miner. You can also do reboot via SSH, but you need to define a custom rule for this. Go to Options dialog, Rules section, Add a user defined rule. Give the rule a name like "Reboot Antminer". Don't define any triggers, instead you check "Support manual activation". Then you define a single action of type SSH, where you need to specify username and password to your Antminer, and make sure that the command is set to "Reboot system". Default SSH username/password for Antminers are typically: root/admin When you save this rule you will find a new button in the toolbar of the main window called Actions. When you add rule with Manual Activation, those rules will be displayed in the Actions menu. Now you have access to a reboot feature for all the Antminers you select. |
|
|
|
Awesome Miner development release v2.9.6 (preview of v3.0)Read this post about the v3.0 previews in general: https://bitcointalk.org/index.php?topic=676942.msg18621070#msg18621070Please make sure to run the same version of both Awesome Miner and the Remote Agent. New in v2.9.6: - GPU mapping feature on the GPU tab for Managed Miner, to combine system hardware monitoring statistics with miner device information like hashrate - Improvements to MSI AfterBurner integration, where AfterBurner can be automatically launched if not running and reverting back to default values are easier. - Several minor improvements and corrections We are getting closer to the v3.0 release now. No more features will be added, instead the focus is on finalizing the work and correcting any issues. The web site and help section will be updated together with the v3.0 release. Please continue to give feedback on issues and request new features. Even if the v3.0 release content is defined, there will of course be many more releases in the future. I do have a long list of feature ideas already, but I'm always trying to prioritize the most popular requests first. Great release you have here ! This new managed profit switching is so great ! I'm planning on buying Premium version to try AfterBurner integration and API. I just have some issues with Excavator reporting : - Temperatures and progress are not reported back, 'Miners' tab show only zeroes for these two columns, only Speed is reported correctly - When forcing a second '-ca' (to have 2 threads per GPU) in the 'Command line parameters...' of Excavator configuration window in the profit profile, AM reports twice the number of GPUs. Also, how can i add new mining softwares for managed profit switching ? It realy misses ccMiner 1.7.6-git fork by tpruvot when working on Lyra2REv2 ! Hope you can help me on these points ! Thx a lot ! Thanks for your comments. The Excavator miner reporting is very very limited at the moment. This is because the API of this miner doesn't provide much information at all at the moment. I've already written to the developers of this miner and ask for more, and they are planning to improve their API in the Excavator 1.2 release. As soon as the Excavator mining software improves in this area, I will make sure the information will be presented in Awesome Miner. You can try to use the very latest feature on the GPU tab called "Map to system monitoring", to get a bit more GPU information by using what Awesome Miner can find. I will also try the -ca parameter case you reported to see if it can be solved from Awesome Miner. I will get back to you on that one. For the Managed Profit Switcher, you should be able to configure this via the Profit Profiles. So go to Options dialog, Profit Profile section, edit for example the AMD GPU profile, select Ccminer in the list and click Configure. In this dialog you should be able to point to custom software path. If you have a larger number of miners, it could make sense to use this feature to upload the mining software to all miners first: http://www.awesomeminer.com/help/uploadsoftware.aspx |
|
|
|
good afternoon
Why bypass the side Expanse (EXP), Musicoin (MUSIC)
Vertcoin (VTC), Ubiq (UBQ)
I can not configure any of them on Dual Ethereum from Claymore + Decred_Siacoin_Lbry_Pascal AMD + NVIDIA GPU Miner within the program
good afternoon
Once again I repeat my questions because the help is not complete and not transparent ((
1. How to configure Claymore's Dual Ethereum + Decred_Siacoin_Lbry_Pascal AMD + NVIDIA GPU Miner v9.3 for the Currency Musicoin (MUSIC) or Expanse (EXP)?
2. How to set up a balance based on bittrex.com
Already just did not try to get one error
Hi, All those coins are not compatible with Claymore's Ethereum Dual miner. Vertcoin uses another algorithm for example. Do you have any pool where you want to mine Musicoin or Expanse for example? Then I can try to guide you based on this pool, as some Ethereum pools are different when it comes to Wallet Address vs Worker Names. For Bittrex.com, do you want to see your current Bitcoin balance on an address you have there? You can start with this guide how to use the Balance feature in Awesome Miner: http://www.awesomeminer.com/help/coinbalance.aspxThe idea is that you enter one or many Bitcoin address in the Coin balance properties. Then you can follow your current Bitcoin balance for these addresses on the Balance tab in the main window of Awesome Miner. If you run into any error, please let me know the details. Thanks! |
|
|
|
If you want something more powerful, you could take a look at Awesome Miner. Then you don't have to do TeamViewer/Remote Desktop anymore as all miners and temperatures are available in a single user interface. It can of course do way more than just displaying remote temperatures, but that's one of the features. It can also display temperatures from remote computers no matter if you run Claymore or something else. You can also do remote GPU overclocking if needed. Example:  |
|
|
|
Awesome Miner development release v2.9.6 (preview of v3.0)Read this post about the v3.0 previews in general: https://bitcointalk.org/index.php?topic=676942.msg18621070#msg18621070Please make sure to run the same version of both Awesome Miner and the Remote Agent. New in v2.9.6: - GPU mapping feature on the GPU tab for Managed Miner, to combine system hardware monitoring statistics with miner device information like hashrate - Improvements to MSI AfterBurner integration, where AfterBurner can be automatically launched if not running and reverting back to default values are easier. - Several minor improvements and corrections We are getting closer to the v3.0 release now. No more features will be added, instead the focus is on finalizing the work and correcting any issues. The web site and help section will be updated together with the v3.0 release. Please continue to give feedback on issues and request new features. Even if the v3.0 release content is defined, there will of course be many more releases in the future. I do have a long list of feature ideas already, but I'm always trying to prioritize the most popular requests first.
|
|
|
|
Thanks for the direct link! I updated the version of the remote agent to 2.9.5 and now the system tab works. It is interesting - because the system tab is getting the temperatures but they are still not showing in the other listing (the one I watch all the time ) screen capture: I assume the one is pulling it from Claymore and the System Info one is pulling it from your remote agent. Product update idea: use the system information one in both locations if available  - lol any idea how to fix claymore's bug? In the next update, 2.9.6, you will actually be able to see the GPU monitoring information from the System tab also on the GPU tab. That will however only work for Managed Miners, because the information from the System tab is from the Awesome Miner Remote Agent. There will be a new button "Map to system monitoring..." in the GPU tab for this purpose. Depending on mining software, settings to mining software and more factors, the order of the devices from the mining software being displayed on the GPU tab may not match all the devices on the system. For that reason it will be possible to map between them. You will see this once I have released the updated versions within a few days. The Claymore temperature bug is something you need to report to the author of that software. |
|
|
|
I think the Claymore miner isn't reporting the GPU status in some scenarios. I've seen that behavior before. Could you provide the API report for this miner and I can verify it. You will find it in the toolbar: Tools -> API Report. If you switch to the new System-tab, can you see any GPU status there?
I looked on the remote machine and the remote agent version was 2.2 Thinking that maybe it was too old I grabbed the newest version - 2.4.2 - but this didn't fix it. It still shows up like this: screen shot: i.e. Mining (68/0/0/0 °C)Claymore version is 9.3 the new System-tab comes up completely blank - no information on it. Here is the API Report: Version: 2.9.5 API command: miner_getstat1 { "result": [ "9.1 - ETH", "185", "103928;290;0", "25661;26083;26091;26091", "0;0;0", "off;off;off;off", "70;31", "us2.ethermine.org:4444", "0;0;0;0" ], "id": 0, "error": null } Thanks for providing these details. From the API report it's clearly a problem in the Claymore miner, as it only reports the status of a single GPU. "70;31" indicates GPU#0 temperature 70 and GPU0 Fan speed: 31%. If you have multiple GPU's those values should also be reported by the Claymore miner, but they are not. I can also see that you are running Awesome Miner main application version 2.9.5. Then you should use the same version of the Remote Agent, also 2.9.5. You can download Remote Agent 2.9.5 manually from here if you was unable to upgrade it from the software: http://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msiAfter applying this version, please check the System tab again. |
|
|
|
Couple weird ass sugestions that would be useful, some take more work then others.
There needs to be a way to see when a rig locks up after applying a OC. You can do this manually right now, but say if a rig starts locking up/rebooting/going offline after clocks change maybe highlight it in red or something. Some sort of management feature for outlining problematic rigs.
A local mining stratum, along with the earlier mentioned solo mining pool. There are a few different ones available. Stratehm is a popular and available one to consider integrating. This is important for wallet mining and also for large scale mining on outside pools.
These are good points. About highlighting problematic miners, it could probably be solved by using the Rules. Triggers: - Offline detection: If the miner becomes offline because of restart or not responding OR - Accept Progress: If number of Accepted shares has been unchanged for example 5 minutes (or any number of minutes between 1 - 10) Action: Highlight Miner -> Red A miner that is rebooting will show up with some red status text in the Status column even without any rules configured. About a built-in stratum - yes, I've had this on my list of things to investigate for future releases. I agree that it would make sense for larger installations. |
|
|
|
How do I get the other card's temps to show up?
They are four RX480 cards mining Eth with Claymore and I can see the temps of all 4 in afterburner but only card 1 is showing in awesome miner.
Screen shot:
Another rig with two GTX cards in it shows the temperatures for each card fine.
I think the Claymore miner isn't reporting the GPU status in some scenarios. I've seen that behavior before. Could you provide the API report for this miner and I can verify it. You will find it in the toolbar: Tools -> API Report. If you switch to the new System-tab, can you see any GPU status there?
- Display of exchange rates for the 4 most popular coins in the status bar
Awesome feature! but trying to ride white text on light blue is impossible if in the "Black" Theme screen capture to show: cheers! I will try to address that one. |
|
|
|
Is there any way of increasing the AM text size? I know I could use the Windows "Ease of Access" Magnifier tool, but that is a pain in the @ss to use and makes the magnifier more difficult than it's worth.
Is there any way currently to increase the Awesome Miner text size or is that something that could be addressed in future releases?
Thanks again for a great app and I'm sure if there is a way to make the GUI easier to see for us older folks, you will figure out a way!
Thanks for the nice feedback. It's currently not possible to change the font size. I do have a note about this request, so it's not forgotten. |
|
|
|
Awesome Miner development release v2.9.5 (preview of v3.0)Read this post about the v3.0 previews in general: https://bitcointalk.org/index.php?topic=676942.msg18621070#msg18621070Please make sure to run the same version of both Awesome Miner and the Remote Agent. New in v2.9.5: - Display of exchange rates for the 4 most popular coins in the status bar - With a new setting, all the profit switching pools (NiceHash, Zpool) can be accessed from any miner, to make it easier to use the same pool configuration for non-profit switching miners as well. - Beta-level support for Excavator miner. Mining statistics are limited due to limited API.
|
|
|
|
|
Show Posts
