Hello!! Currently using Awesome Miner with MPH. I would like to change to Binance pool, first because fee is only 0.5% instead of 0.9%, but also because it's more convenient for me.
Is it possible, and if so, how?
Thanks a lot!!
You can create a new pool in the Options dialog, Pools section. 1) Enter the following Pool Connection URL if you want to mine Ethereum: ethash.poolbinance.com:8888 2) Worker name should be your Binance account name 3) Select Ethereum as coin 4) Save the pool 5) Open the properties of your Managed Miner and select the Binance Ethereum pool you just added. Done it!!! Do you know why, on equal hashrate, Binance pool gives me an estimate about 10% lower than MPH pool? I've done in two computers, one with a 1070 and the other one my 5x mining rig and in both cases result I see on Awesome miner is lower on Binance pool (actually is more like 15% worse) Are you comparing the Mining Pool Hub Ethereum/Ethash multi-coin pool with the Binance Ethereum pool? In this case the Mining Pool Hub may mine other coins than only Ethereum from time to time if they consider it to be more profitable. |
|
|
|
Hi Patrike, after Bminer update to 16.4.6 version, now is unable to start mining of Cuckatoo31 algo. Looks like the syntaxis of delegated mining params is wrong. Regards.
Bminer 16.4.6 doesn't work with Cuckatoo31 for some reason. It's the same if you launch their grin31.bat file, it's the same error. Going back to 16.4.5 makes it work again. |
|
|
|
|
Awesome Miner version 8.4.2
ASIC mining
- Whatsminer hashrate display will use the 1 minute average value by default, as it's a more realistic representation of the current hashrate
- Whatsminer M32s supported
- Avalon 1246 support improved
- Innosilicon Scrypt miner support improved
GPU mining
- Easier to find the GPU to overclock by allowing double click on a GPU in the GPU tab to switch to the GPU clocking tab
Features
- New hashrate trend trigger for comparing the average hashrate of the last hours to the average hashrate over the last 6 days
Mining software
- Gminer 2.50
- Nanominer 3.3.4
- XmRig 6.11.1
- Lolminer 1.25
- Miniz Miner 1.7x3
- CpuMiner-Opt 3.16.2
Corrections
- Correction to GPU selection for Phoenix Miner when selecting a single GPU with index 10 or above.
|
|
|
|
Patrike, thanks a lot for your support and help with my issue, all is up and running (finally!). Sent a bit of merit your way  Thanks! |
|
|
|
Good afternoon, Patrike. How to run nanominer ERGO + ZIL dual mining? Thank.
Hello. This is not yet supported via Awesome Miner. It works with awesomeminer, setup a managed miner with ergo pool, then go to managed miner properties, choose nanominer, your ergo pool, go to configuration file, and ONLY add your zil config to autolykos config. Thats it. The only problem is, AM shows twice the number of GPUs. But i hope Patrike will improve this. Patrike can you update miniZ miner? And have you looked in coins export? Thanks for the feedback. Miniz has been updated. The request for a Coin export feature is noted, but right now there are also a large number of other requests that also needs attention. Everything is however noted so no requests as lost. |
|
|
|
Hello!! Currently using Awesome Miner with MPH. I would like to change to Binance pool, first because fee is only 0.5% instead of 0.9%, but also because it's more convenient for me.
Is it possible, and if so, how?
Thanks a lot!!
You can create a new pool in the Options dialog, Pools section. 1) Enter the following Pool Connection URL if you want to mine Ethereum: ethash.poolbinance.com:8888 2) Worker name should be your Binance account name 3) Select Ethereum as coin 4) Save the pool 5) Open the properties of your Managed Miner and select the Binance Ethereum pool you just added. |
|
|
|
Weird thing is happening and I can't beat it for almost 2 days now. One of my rigs was running Linux and had hardware issues, so I disassembled it changed motherboard, few cards etc. Altered all OC settings, GPU number etc in the settings, started the rig... It loses cards in less than 1 minute, they just stop hashing and go offline. After deleting miner from the system, setting OC again nothing changed. Okay, thought I, let's try a different approach. I took another SSD, installed fresh copy of Windows on it, installed Remote agent for Windows, searched for a new miner, found and configured it... Now it shows the rig is offline, though when I run Managed host - Test connection and uncheck Remote Agent for Linux tickbox (it's checked by default) - connection test goes OK. All this time the rig has the same IP. What am I doing wrong and how can I solve this?
Please try to restart the Awesome Miner main application once. If you change a computer from Linux to Windows, the connection may not be correctly initiated after a change to the "Remote Agent for Linux" checkbox. I did that few times both with main app and remote agent. Nothing helped. Thanks for the update. In case you still experience this issue and also verified in the Options dialog, Managed Hosts, that you don't have any duplicates in terms of IP addresses, please send me the Awesome Miner log file and I will investigate further. You can send via the following link: https://www.awesomeminer.com/contactThanks Patrike, will do that. I don't see log file in program directory, where should I look in Win64, %appdata% ? I couldn't overcome this issue and had to stop using AM at all for more than a week now, which super annoys me. In Awesome Miner, please go to the toolbar Tools and click Log File. This will point you to the Awesome Miner log file. |
|
|
|
Hi Patrike, some suggestion:
Can you please add a rule trigger, where user can compare a difficulty value for selected algorithm and actions for add / remove selected pool / pool group to profit switching additional pools section. This will help to create a smart dynamic profit switching scenario, where actual algoritm difficulty is important, when no sence to switch to less liquidity coin, but at the moment this small coin/algo is quite more profitable as coin with big liquidity and trigger switching. Simple AM need a functionality to manage a "profit switch" additional pools list.
Regards.
There is a trigger for detecting a specific difficulty value. What is missing here would be an action to make impact on the profit switching decision for a specific pool or coin. Instead of adding/removing pools from the profit switcher, it might would make more sense to set the profit factor of these pools or coins. This would impact the profit switching decision. |
|
|
|
Hello,
I found a problem trying to get on information tab the system uptime:
Please, it will be nice to see the uptime system on information Tab
Thanks for your question. For ASIC miners, Awesome Miner can only show the Mining Uptime. This is the time the mining process has been running, but it isn't the same as the operating system uptime. If Cgminer process on the ASIC miner is restarted, the Mining Uptime will reset although the system didn't reboot. The Information Column has support for two kinds of uptime, the Mining Uptime and the System Uptime (OS uptime). For your ASIC miner, only Mining Uptime is supported. For Managed Miners, we can show both the Mining Uptime and also the System Uptime. Nice! And if the miner is not managed miner the information tab does not show any information about the uptime? The information column has two properties related to uptime, "System Uptime" and "Mining Uptime". If you configured to display "System Uptime", your External Miner will show zero. |
|
|
|
Hello,
I found a problem trying to get on information tab the system uptime:
Please, it will be nice to see the uptime system on information Tab
Thanks for your question. For ASIC miners, Awesome Miner can only show the Mining Uptime. This is the time the mining process has been running, but it isn't the same as the operating system uptime. If Cgminer process on the ASIC miner is restarted, the Mining Uptime will reset although the system didn't reboot. The Information Column has support for two kinds of uptime, the Mining Uptime and the System Uptime (OS uptime). For your ASIC miner, only Mining Uptime is supported. For Managed Miners, we can show both the Mining Uptime and also the System Uptime. |
|
|
|
hello everyone.
a bit of a noobie question, but i have not found an answer through search. (or i didn't do my search criteria right)
Does the linux agent handle the O.C. on gpus with the set clocking parameters like on the windows version? or do i need something else to set it up?
or do i need to use claymore instead of phoenix to get it working?
or is there no support for clocking through linux agent?
i see there are ways to do it manually, but would like the easy of AM doing it for me.
cheers
Thanks for your questions. GPU overclocking is supported by Remote Agent on Linux as well. The properties available for overclocking may not be identical as those available on Windows, so if you ever created a GPU Clocking Profile on Windows you will have to re-create it if you move to Linux. Thanks for the reply. I ask because i don't even see my GPU's listed in the clocking tab. They are in the GPU tab, and i have a clocking profile set, but the memory is not clocked up according to the linux profile i made for ETH. Running 18.04 ubuntu. should i try some other disto, or maybe the 20.04 version is better supported? GPU's are gtx 1070's. thanks for your continued efforts. Thanks for the update. Can you please try to run the following for nVidia clocking on Ubuntu: sudo nvidia-xconfig -a --cool-bits=31 --allow-empty-initial-configuration sudo reboot ok, so i had upgrade to 20.04. but it started crashing. after a fresh install on 18.04 again, i am back to where i was. i have cards on gpu tab. but now, after your command, i have gpu 0 only on clocking tab also. cheers Thanks for the update. Please restart Remote Agent once, go to the GPU clocking tab for the miner again, then send me the Remote Agent log file. ok, am not able to do this at this point. Am using cpu gpu for console use. however, i now have a black screen on boot. Rig is running and mining, but only the 1 GPU in clocking tab. 6 gpu's in gpu tab. also, i noticed on the console tab that, on startup , after a reboot, the mining software on startup says that GPU0 is using kernel #4 while all other gpu's are using kernel #2. and GPU#0 is the only one showing up in the clocking tab. not sure if this helps. I'll wait for your reply, but may have to wipe and reinstall again to get console screen back. or should i turn off CPU GPU and use the 1070 for cosole use? also might add that all 1070 GPU shows up in LSPCI, but only 1 GPU shows up when i ran 'ubuntu-drivers devices' before i run your last command. cheers I would have to investigate the Remote Agent log file to get a full understanding. You can access this log file via Awesome Miner as well, via the toolbar Tools -> Log File -> Remote Agent log file. Is the "nvidia-smi" command showing everything it should? |
|
|
|
Weird thing is happening and I can't beat it for almost 2 days now. One of my rigs was running Linux and had hardware issues, so I disassembled it changed motherboard, few cards etc. Altered all OC settings, GPU number etc in the settings, started the rig... It loses cards in less than 1 minute, they just stop hashing and go offline. After deleting miner from the system, setting OC again nothing changed. Okay, thought I, let's try a different approach. I took another SSD, installed fresh copy of Windows on it, installed Remote agent for Windows, searched for a new miner, found and configured it... Now it shows the rig is offline, though when I run Managed host - Test connection and uncheck Remote Agent for Linux tickbox (it's checked by default) - connection test goes OK. All this time the rig has the same IP. What am I doing wrong and how can I solve this?
Please try to restart the Awesome Miner main application once. If you change a computer from Linux to Windows, the connection may not be correctly initiated after a change to the "Remote Agent for Linux" checkbox. I did that few times both with main app and remote agent. Nothing helped. Thanks for the update. In case you still experience this issue and also verified in the Options dialog, Managed Hosts, that you don't have any duplicates in terms of IP addresses, please send me the Awesome Miner log file and I will investigate further. You can send via the following link: https://www.awesomeminer.com/contact |
|
|
|
Weird thing is happening and I can't beat it for almost 2 days now. One of my rigs was running Linux and had hardware issues, so I disassembled it changed motherboard, few cards etc. Altered all OC settings, GPU number etc in the settings, started the rig... It loses cards in less than 1 minute, they just stop hashing and go offline. After deleting miner from the system, setting OC again nothing changed. Okay, thought I, let's try a different approach. I took another SSD, installed fresh copy of Windows on it, installed Remote agent for Windows, searched for a new miner, found and configured it... Now it shows the rig is offline, though when I run Managed host - Test connection and uncheck Remote Agent for Linux tickbox (it's checked by default) - connection test goes OK. All this time the rig has the same IP. What am I doing wrong and how can I solve this?
Please try to restart the Awesome Miner main application once. If you change a computer from Linux to Windows, the connection may not be correctly initiated after a change to the "Remote Agent for Linux" checkbox. |
|
|
|
|
Awesome Miner version 8.4.1
Mining software
- Gminer 2.49
- T-Rex miner 0.19.14
Corrections
- Correction to the heatmap feature to automatically add miners
- Correction to the web based operation for moving miners to a group while a filter is active
- Correction to GPU selection for disconnected Managed Miners
|
|
|
|
hello everyone.
a bit of a noobie question, but i have not found an answer through search. (or i didn't do my search criteria right)
Does the linux agent handle the O.C. on gpus with the set clocking parameters like on the windows version? or do i need something else to set it up?
or do i need to use claymore instead of phoenix to get it working?
or is there no support for clocking through linux agent?
i see there are ways to do it manually, but would like the easy of AM doing it for me.
cheers
Thanks for your questions. GPU overclocking is supported by Remote Agent on Linux as well. The properties available for overclocking may not be identical as those available on Windows, so if you ever created a GPU Clocking Profile on Windows you will have to re-create it if you move to Linux. Thanks for the reply. I ask because i don't even see my GPU's listed in the clocking tab. They are in the GPU tab, and i have a clocking profile set, but the memory is not clocked up according to the linux profile i made for ETH. Running 18.04 ubuntu. should i try some other disto, or maybe the 20.04 version is better supported? GPU's are gtx 1070's. thanks for your continued efforts. Thanks for the update. Can you please try to run the following for nVidia clocking on Ubuntu: sudo nvidia-xconfig -a --cool-bits=31 --allow-empty-initial-configuration sudo reboot ok, so i had upgrade to 20.04. but it started crashing. after a fresh install on 18.04 again, i am back to where i was. i have cards on gpu tab. but now, after your command, i have gpu 0 only on clocking tab also. cheers Thanks for the update. Please restart Remote Agent once, go to the GPU clocking tab for the miner again, then send me the Remote Agent log file. |
|
|
|
hello everyone.
a bit of a noobie question, but i have not found an answer through search. (or i didn't do my search criteria right)
Does the linux agent handle the O.C. on gpus with the set clocking parameters like on the windows version? or do i need something else to set it up?
or do i need to use claymore instead of phoenix to get it working?
or is there no support for clocking through linux agent?
i see there are ways to do it manually, but would like the easy of AM doing it for me.
cheers
Thanks for your questions. GPU overclocking is supported by Remote Agent on Linux as well. The properties available for overclocking may not be identical as those available on Windows, so if you ever created a GPU Clocking Profile on Windows you will have to re-create it if you move to Linux. Thanks for the reply. I ask because i don't even see my GPU's listed in the clocking tab. They are in the GPU tab, and i have a clocking profile set, but the memory is not clocked up according to the linux profile i made for ETH. Running 18.04 ubuntu. should i try some other disto, or maybe the 20.04 version is better supported? GPU's are gtx 1070's. thanks for your continued efforts. Thanks for the update. Can you please try to run the following for nVidia clocking on Ubuntu: sudo nvidia-xconfig -a --cool-bits=31 --allow-empty-initial-configuration sudo reboot |
|
|
|
The temperature and consumption for ryzen CPU 3900x is gone again.
I was hopping some one else would have the issue .
I hate wasting your time .
it's been gone sense 8.34 development version.
Thanks for the report. Please make sure "IntelliBreeze Maintenance Service" is running (open "services.msc" in Windows). I suspect this one might have been blocked by security software or similar. IntelliBreeze Maintenance Service is running on automatic. it only happen with my CPU rigs not my GPU rigs if that helps pin it down. Can you please send me the following file via mail or PM? Thanks! C:\ProgramData\IntelliBreeze\IntelliBreezeMaintenance.log |
|
|
|
The temperature and consumption for ryzen CPU 3900x is gone again.
I was hopping some one else would have the issue .
I hate wasting your time .
it's been gone sense 8.34 development version.
Thanks for the report. Please make sure "IntelliBreeze Maintenance Service" is running (open "services.msc" in Windows). I suspect this one might have been blocked by security software or similar. |
|
|
|
Hi! I'm using this application on a system which is also used for other tasks. I need to run the miner as an administrator for -straps (it includes a 1080Ti), but this prevents the miner from being hidden, causing focus to be taken every time it profit switches. Is there a way I can hide (or minimise) the window while also running it as admin? I've tried consolestate /min and Quiet.exe, but consolestate /min doesn't work and when combined with Quiet.exe Awesome Miner thinks the miner has closed.
Good point, I will investigate if this is possible when launching with administrator permissions. |
|
|
|
|
Awesome Miner version 8.4
GPU mining
- GPU overclocking for AMD 6000-series. Note: Memory clocking may be restricted in the same way as it's restricted using the official tools from AMD
- Improved GPU selection for Managed Miners and Managed Profit Miners, where the last know set of GPUs are listed for disconnected miners.
- Notifications improved to include more details about the GPU causing the rule to trigger. (For triggers related to a specific device)
Features
- New tab for Remote Proxy miner discovery details (used for large scale mining operations only)
- Miner group view can display the lowest miner temperature, configurable in the Options dialog, General section
Mining software
- Gminer 2.48
- TeamRedMiner 0.8.1.1
- SrbMiner-Multi 0.7.1
- NbMiner 37.1
- Nanominer 3.3.2
- T-Rex miner 0.19.12
- CpuMiner-Opt 3.16.1
- XmRig 6.10
Corrections
- Correction to Antminer S9k and S9SE ASIC chip temperature reading
- Corrections to Remote Proxy
- Correction to a profit switching scenario with Phoenix Miner
- The web based miner group view will use the global setting for chip temperature display, similar to the Windows application
- Correction to a scenario related to nVidia GPUs that could cause memory leaks. Note that nVidia drivers 460.x and 461.x have an internal memory leak as well, causing any process that monitors power usage to leak memory.
- Correction to Telegram messages for additional users included in the default Administrator user group
- Correction to a scenario where the same API port could be assigned to two Managed Miners
|
|
|
|
|
Show Posts
