|
Seems like I need more testers for performance timings. Looking for every memory types. You have to know how to use PBE or SRB and tweak cards for best hashrate.
|
|
|
|
What? Price is 30 USD. This is not support thread for the store! |
|
|
|
@Both of the previous replies, wow that was dumb, i think i just kinda forgot about it and i redid everything and all worked out. Running a solid 168 MH/s with 6 cards on 875Watts. I do have a question tho, is there much of a different between power saving mode or OC/Undervolt mode in the PBE 2.1? I kinda don't want to do all my cards again right now that i got everything working just to find out it doesn't change much  So that's 28MH/s per card. I get the same with free timings, aren't your timings supposed to give better hashrate? Depends on card, memory type, quality, OC, miner, etc. |
|
|
|
I almost get 60MH/s from 2 RX 570 4GB (190W for both according to GPU-Z and afterburner) mining ETH only, considering GTX1060 are much slower and GTX1070/1070Ti much more expensive (>500€), i think Polaris based GPU are very relevant for mining, at least ethereum.
That is only core power consumption... at wall it would be a way higher. |
|
|
|
So thanks 1337toolz for the rom! It unlocked 16cu which is awesome. Just for some reason every card decided to take a hit of over 1MH/s so I went from almost 51 to just over 45. I redid the bios with the one I created and boom! Back up to over 50. Weird. With 14cu that ASUS card gets between 11.6 and 12 MH/s but when it unlocked to 16cu it dropped down to 10.2 and it took down the other three cards as well. I also lost the compute function in the Global settings but it is running where it was running before so no harm no foul
You need performance timings to get higher hashrate. You may use my guide https://bitcointalk.org/index.php?topic=1954245.0 |
|
|
|
I took a photo of this so people wouldn't call me a lier. All 5 gpu are MSI Armour RX580 8GB All have exactly the same OC, BIOS mod The 2 with Micron mem are running ~29.8 MH/S The rest have the Hinex mem running ~27.8 MH/S But this 1 freak cpu with Hinex is somehow running at 45.5 MH/S @48C Alas it wasn't meant to be, it only lasted 10 min before Claymore reset itself and the freak went back to its old self. lol  You have OCed too much. It's not so unusuall with Claymore, but it won't last long. You more likely need better timings. |
|
|
|
I saw that video too, some valid points but who knows in this market... all guesses imo I laugh so hard on this video I love his introduction when he says all the courses he managed to do |
|
|
|
I was about to flash the modded bios for my RX470 (knowing that I have Samsung memory I presumed that the manufacturer was Gigabyte) but after running SRB Polaris, I found out that my card is a Sapphire but with Samsung memory! @Mattthev being very helpful, will upload in the coming days a modded BIOS for this version of RX470 Sapphire with Samsung memory in https://mining-bios.eu BIOS was updated, a very straightforward process based on the guide provided. Observations so far: with timings 1240/2000 and 850v AMD_XMR_STAK 2.2 delivers about 950 H/s per GPU, but after some hours the software is frozen and I have to restart the software not the rig (with the default GPU bios always I had to restart the rig). I think it is a matter of tweaking and testing to achieve stability. Anyway the good thing is that Claymore is running perfectly without any freezes etc. I do have noticed though that temperatures are pretty low for AMD_XMR_STAK (47c max) where Claymore is much higher (close to 60c) and also GPU power draw for XMR_STAK is lower vs Claymore (~73v vs ~97v). You may try our latest version 2.2.1 https://github.com/IndeedMiners/xmr-aeon-stak/releases Or build from original sources. XMR-STAK is not so power hungry. You may also try lower intensity https://mining-bios.eu/guides-and-miners/cryptonight-xmr-etn-sumo-aeon-mining-guides-and-miners-configs/ |
|
|
|
Here are my steps: 1. Switch to High  /Low switch on the card, Bios 3 and backed them up. 2. Tried to flash the bought bios from @Mattthev website with ATIWinFlash, but it failed, with an error "SubSystemID mismatch" or something that like, 3. Loading Polaris 1.4.1 showed no timings, so i loaded Polaris 1.6.7 and it worked fine, and here are the differences between my bios and the bought bios: Original: VendorID: 0x5249 DeviceID: 0x1002 Sub ID: 0x387ESub Vendor ID: 0x174B Bought BiosVendorID: 0x5249 DeviceID: 0x1002 Sub ID: 0x353ESub Vendor ID: 0x174B So what now? Do I replace the bought bios' Sub ID with mine? (patch on polaris) Or how else do I flash? These issues were not described by Mattthev ... Send me your bios via e-mail. |
|
|
|
What dramatic change we saw in last weeks of last year was the concept of supply became irrelevant totally. This year will take that at one step more higher and people those think larger supplies coins or tokens will not rise will left behind. ETN is sitting on very low market cap which shows lot of space for growth. It will be ride surely only matter of wait and time is here.
Very low market cap? This is very low market cap https://coinmarketcap.com/currencies/sumokoin/ |
|
|
|
I'm mining ETN on my Android phone with official app, apparently I got lucky and became beta tester.
Now I want to know where do my coins come from? I know my phone is not actually mining so do I get coins from pre-mined stack or from people who mine with PC? Or mobile mining is more like staking?
Maybe this betatest is the reason why block reward felt down.... https://i.imgur.com/dGPFwFi.pngIt has nothing to do with that... Here you can find calculation for block rewards for Cryptonote coins. https://monero.stackexchange.com/questions/4089/monero-block-reward-scheduleI'm not sure, but I would say beta testers only mining tesnet coins, isn't? |
|
|
|
. I think the more exchanges will ETN go the price will be lower and the supply is everyday higher and higher... the mooning thing will be like 50 cents at best. I think the iOS app is still not on Apple store, right? I think Apple won't even allow it. The mobile mining is the only thing it can grow at least somehow, but again there will be higher supply thanks to it. If the dev team will be like it was, ETN won't survive 2018 (I've already said that many times) Read it fast before they delete my post I think, I think, I think. Just because you think something doesn't mean its true. The first half of my post is true, the second one is only my opinion that's why you respond only on half of my post? |
|
|
|
any one try this cards
Gigabyte Radeon RX 560 4GB OC GDDR5 GV-RX560OC-4GD
singel fan
ASUS Radeon RX 560 4GB GDDR5 RX560-4G dual fan
what is your hashrate
Yes, I had a couple of the Gigabyte Radeon RX 560 4GB OC GDDR5 GV-RX560OC-4GD - Were locked to 896 shaders, Micron memory, so after some searching and following some instruction I unlocked them to 1024 shaders, also found a custom strap for Micron memory flashed it all back and managed to get 13.6MH/s. Also purchased some Gigabyte Radeon RX 560 4GB Gaming OC, running PBE OneClick, getting around 14.8MH\s at the moment. Mind if I ask how are you getting 14.8 with that card? I am only getting 13.3 with PBE OneClick and my memory set at 1950/850. I bumped it to 2000 but there was no real difference in hashrate so I dropped it down a bit. I tried overvolting the ram a bit at 900 and 950 but again I saw no difference so I dropped it back down to 850. Probably better luck on memory. Some of the Microns can clock pretty high. |
|
|
|
Unless localy relevant. Tenhle doplněk je dosti subjektivní ne?  Například eSport je lokálně hodně relevantní, jelikož Česko v tom začíná být hodně důležité (vítězové herthstone tým šampionátu byli češi). Další co jsem překládal je arbitrážní platforma, to je relevantní snad pro všechny státy. A tenhle poslední překlad, kdo by nechtěl, aby mu oblečení z oline shopu padlo? No nevím, příjde mi to všechno jako blbost jenom to tu překáží. Ale chápu, že chceš tokeny zdarma i jako Jr. Member. S Meritem to teď budeš mít docela složité, pokud nebudeš dost pomáhat na fóru. I když jsem aktivní v mining sekci, tak těch + mám jen minimum a postup na Hero mi asi bude chvíli trvat |
|
|
|
I was about to ask you if you ever had to lead a company, but i know your anwser already.
Just because you got alot of money, it cleary does not mean you have to spend it all like a maniac in a rush to try to archive something.
I never say why they don't spend the money like maniacs but the support is the lower I've see so far and about me leading something is another story. They don't do anything, they are to busy to answer because they spending the money on.... With a huge money, they accumulated it's just right to at least get one or two representatives they can hire someone in the third world country that will not ask for a big salary so and updating this thread will only take an hour or two it's coming that it comes from a reliable source. As I said, they pretending to spend a big amount of money with hacker one, my next question is! Why they never test the site with hacker before launching and they tested after? Now you know why. Why would they spent anything? It's from the beginning, it took them more than month to make web wallet that they call mobile wallet... Once I said that only way that they can have mobile wallet is to port Monerujo... My post was delete because of link to Monerujo (This one probably will be too). There is also none GUI wallet, it's only matter of time once somene hack the web wallet... But the marketing is perfect. The people all crazy about it. It's not like Verge when they had problem with Wraith and everybody hates them, ETN fans loves ETN and that guy Richard... I think the more exchanges will ETN go the price will be lower and the supply is everyday higher and higher... the mooning thing will be like 50 cents at best. I think the iOS app is still not on Apple store, right? I think Apple won't even allow it. The mobile mining is the only thing it can grow at least somehow, but again there will be higher supply thanks to it. If the dev team will be like it was, ETN won't survive 2018 (I've already said that many times) Read it fast before they delete my post |
|
|
|
Acutally RX550 should be more power efficient it should use better 14nm FinFet fabrication. RX 550 are pretty good for XMR 400-500H/s if you have good memory. |
|
|
|
They might fix it. I'm still on 17.6.2 drivers and on these and older ones there were problem with stability and OC settings, clocks weren't successfully applied when you check it with Hwinfo and GPU-Z. Some of my customers have same problems with newer drivers too, but not sure about Adrenaline. Thanks for the clue on what to check and you are indeed correct - GPU-Z 2.7.0 reports the stock and current clock values are the same (1295/1750, vs. 1200/1900 reported by MSI AB) so something buggy going on for sure, and you get a merit! Disabling the iGPU on the Onda mobos has led to a lot of problems with NO video showing up, and it not being recoverable without removing the CMOS backup battery. EDIT - so the plan, I guess, is to order a DVI-D to VGA adapter (so I can continue using my KVM switch with my other Onda board that has all NVIDIA cards) and see if I can get the mobo to disable the onboard VGA *and* enable one of the PCIe GPUs for video out. Hmm... I just switched my (3) RX 560 rig over to mining UBQ to check this out and I'm getting 38.8 MH/s total with 1200/1900 set in MSI AB. Driver version is Adrenalin 18.2.2 in Compute mode. So my speed does seem a bit low per card (12.9 MH/s) given they all have Elpida memory. Not using the iGPU is a bit of a problem with the Onda D1800 mining mobos, though.
EDIT - and dropping all 3 mem clocks to 1800 did not change hashrate as it should have...
You probably need better timing strap. Also it's better to change clocks before you start mine it sometimes doesn't react on changes. I'm interested... but I need to sort out this iGPU mess, first. Again, I don't use these new drivers, but on those old I need HDMI dummy plug, it's working without it for me, but I know some RX cards need it. I use it because Teamviewer resolution that is terrible without it. I'm using one of those 2 dollars HDMI to VGA convertor, it's fake not the original, but it does the job All my rigs have Z270 chipset. Thanks for the Merit I was thinking that I will have it because of my guides, but they not giving me almost none |
|
|
|
Do not use iGPU with AMD! Bad idead, it blocks OC settings, might be fixed with newer drivers, but it was big problem for most cards for mining. Only with Nvidia cards.
Could you please elaborate on this? I'm using onboard intel graphics on all my rigs, both amd and nvidia, and I did have some issues with amd systems, but have always just assumed that it's due to their buggy drivers and all the nonsense with modded bioses, paching etc. I've only got one rig with amd cards that doesn't use onboard graphics, and it is indeed the most stable among them all. So now your post made me think that maybe I should try disabling the onboard on all my amd rigs. OC settings don't seem to be blocked though, I'm using overdriventool and it works fine. They might fix it. I'm still on 17.6.2 drivers and on these and older ones there were problem with stability and OC settings, clocks weren't successfully applied when you check it with Hwinfo and GPU-Z. Some of my customers have same problems with newer drivers too, but not sure about Adrenaline. Hmm... I just switched my (3) RX 560 rig over to mining UBQ to check this out and I'm getting 38.8 MH/s total with 1200/1900 set in MSI AB. Driver version is Adrenalin 18.2.2 in Compute mode. So my speed does seem a bit low per card (12.9 MH/s) given they all have Elpida memory. Not using the iGPU is a bit of a problem with the Onda D1800 mining mobos, though.
EDIT - and dropping all 3 mem clocks to 1800 did not change hashrate as it should have...
You probably need better timing strap. Also it's better to change clocks before you start mine it sometimes doesn't react on changes. |
|
|
|
|
Show Posts
.
