325.2 MHash/sec Sapphire 5830 Extreme 1010/370/1.175v 70c GUIMiner v2011-07-01 / phoenix / diapolo modded phatk 7-17 VECTORS BFI_INT WORKSIZE=256 FASTLOOP=false AGGRESSION=14
|
|
|
You can buy 5830s, new for 8btc in the main forum. These cards are a dime a dozen now. 5btc is more like it.
Thats a really good deal. Mind pointing me to the thread?
|
|
|
What makes you so sure its phoenix and not the kernel? 7-11 kernel and 7-17 kernel = work perfectly. Swap out to 2.0 kernel, spams idle.
Btw I searched that thread you linked and didn't see any mention of idle bug. :/
edit: did some other searching and apparently someone mentione didle bug was fixed in 1.50 but guiminer v2011-07-01 uses phoenix 1.50 according to my console, so I don't know where to go from here. If someone can figure out the problem and give steps to solve the idle bug with guiminer v2011-07-01, catalyst 11.7, opencl driver 2.5, win7 x64, and this kernel, i'll donate 0.25 btc to you. I would prefer to keep using phoenix in guiminer.
"[0 Khash/sec] blah blah" is referring to the idle problem. See http://forum.bitcoin.org/index.php?topic=6458.msg229912#msg229912That is with the original kernel that people are having the idling problem. And the author basically said he will not be able to fix that bug and he is leaving it to other developers. He claimed the idling bug might be fixed in 1.50, in fact it was not. The idling bug has something to do with the AGGRESSION option, try lowing it might fix the problem. I tried all aggressions from 1 to 14 as well as changing FASTLOOP from false to true. Setting to true would just spam idle. Setting to false above aggression 6 would also spam idle. Setting to 6 or lower would spam stuff like.. 2011-07-30 21:50:53: Listener for "5830": [30/07/2011 21:50:53] [16.77 Ghash/sec] [0 Accepted] [0 Rejected] [RPC (+LP)] 2011-07-30 21:50:54: Listener for "5830": [30/07/2011 21:50:54] [16.77 Ghash/sec] [0 Accepted] [0 Rejected] [RPC (+LP)] 2011-07-30 21:50:55: Listener for "5830": [30/07/2011 21:50:55] [16.77 Ghash/sec] [0 Accepted] [0 Rejected] [RPC (+LP)] 2011-07-30 21:50:56: Listener for "5830": [30/07/2011 21:50:56] [15.22 Ghash/sec] [0 Accepted] [0 Rejected] [RPC (+LP)] 2011-07-30 21:50:57: Listener for "5830": [30/07/2011 21:50:57] [16.77 Ghash/sec] [0 Accepted] [0 Rejected] [RPC (+LP)] 2011-07-30 21:50:58: Listener for "5830": [30/07/2011 21:50:58] [16.77 Ghash/sec] [0 Accepted] [0 Rejected] [RPC (+LP)] 2011-07-30 21:50:59: Listener for "5830": [30/07/2011 21:50:59] [16.77 Ghash/sec] [0 Accepted] [0 Rejected] [RPC (+LP)] 2011-07-30 21:51:00: Listener for "5830": [30/07/2011 21:51:00] [16.77 Ghash/sec] [0 Accepted] [0 Rejected] [RPC (+LP)] 2011-07-30 21:51:01: Listener for "5830": [30/07/2011 21:51:01] [16.77 Ghash/sec] [0 Accepted] [0 Rejected] [RPC (+LP)] ...which I know is absolutely wrong. Plus my GPU utilization is still 0% when it's spamming that. The donation (or prize if you want to look at it like that) of 0.25 btc for a fix to this while using guiminer v2011-07-01 win7 x64 is still up for grabs. edit: I also tried different WORKSIZE, no avail. Under regular phoenix (no guiminer) the kernel seems to work, though the improvement isn't as big as I had hoped. Still looking for a fix for guiminer based phoenix, unless the phoenix for guiminer is bad. I don't suppose anyone knows is subbing original phoenix 1.5 (the 6 meg one) in for the 22KB one in guiminer will work? edit2: subbing the 6800KB phoenix.exe in guiminer dir instead of the 22KB one -seems- to work (my shares are going up) but guiminer doesn't know what phoenix is doing. it only shwos shares going up. It doesnt show hash rate or any system messages in the console (LP new block, opencl errors, etc)
|
|
|
Technical Information: *** STOP: 0x1000007e (0xffffffffc0000094, 0xfffff880048ec909, 0xfffff88002badfa8, 0xfffff88002bad800) *** atikmdag.sys - Address 0xfffff88004af3456 base at 0xfffff88004806000 DateStamp 0x4e1676c7 How in the hell did you get a screencap of a BSOD?
|
|
|
Seems it only gives problem to those using GUIminer. I am using AOCLBF 1.75 & i so far didn't get any error, except strange Mhash/s variation which i already posted in this thread some posts back. GUIminer users , try with AOCLBF to check that also gives you problem.
OS-Windows 7, 64 bit with AERO enabled, catalyst 11.8 beta.
I tried aoclbf about a week or 2 back. I didn't like how the on-screen display was ugly, or didn't even show, so I didn't know the status of my miners. :/
|
|
|
best of luck from this place found this on WOT ext for firefox.
"Warning: Keep out. IP/Hostname/Website containing malware of various types that can seriously compromise the system and corrupt/steal/lock sensible data from it."
hope you didnt just get riped off. i only trust newegg haha
Well insight doesnt open until monday. My CC company will open in about 4 hours though, so maybe I can catch it before the charge even happens. Edit: I got a hold of my CC issuer. At this point, there is nothing they can do. It's up to the merchant to honor my request. If things go south, I can file a dispute and get some or all of my money back.
|
|
|
Don't know. I'm not good with anything regarding legal stuff. All I know is original link is 5850. Shopping cart is 5850. Final review is 5850. Email with order confirmation is 5850. Clicking the link in email for order stats shows 6570. :/ http://dl.dropbox.com/u/9768004/ugh.pngI'm going to have my credit card company cancel the charge or whatever it takes to get my money back if this is for 6570's.
|
|
|
I think I found the error.
The manufacturer part number listed is 100323L That is is accordance with a sapphire 6570.
Think I'll have to cancel my order. I jumped the gun D:
|
|
|
I'm tempted to buy 8 right now, but I'm scared to plop down that much money in 1 shot D:
Plus, I don't want to be scammed, since they reviews have some amount of negative feedback. /veryscared
|
|
|
What makes you so sure its phoenix and not the kernel? 7-11 kernel and 7-17 kernel = work perfectly. Swap out to 2.0 kernel, spams idle.
Btw I searched that thread you linked and didn't see any mention of idle bug. :/
edit: did some other searching and apparently someone mentione didle bug was fixed in 1.50 but guiminer v2011-07-01 uses phoenix 1.50 according to my console, so I don't know where to go from here. If someone can figure out the problem and give steps to solve the idle bug with guiminer v2011-07-01, catalyst 11.7, opencl driver 2.5, win7 x64, and this kernel, i'll donate 0.25 btc to you. I would prefer to keep using phoenix in guiminer.
|
|
|
Bah. Thread title was extremely misleading. I was expecting getting 8 6990's and only paying $900 for all of them. :I
|
|
|
Still waiting on my resin encased coin. If it doesn't come in the next couple days I'm going to be filing a dispute with Paypal. and considering this guy a scammer. I don't care that one or two people have received theirs, I have had absolutely no contact from this guy since he got my money so as far as I'm concerned I'm out my money for nothing.
The first post of this thread specifically stated he does not take paypal for these goods, unless he changed his mind between page 1 and the last page.
|
|
|
Free bump.
Great price, and I would buy one .. if I could afford it. Assuming proper overclocks and phatk kernels with 2.4/2.5 opencl, you could do over 1900mhash/sec, maybe 2ghash if you're lucky. New phatk coming out soon* which will boost performance even further (about 2+% from the looks up alu difference)
I'll keep my eyes on this thread, since 58xx's are becoming extremely hard to find retail for good prices.
|
|
|
Win7 x64, 5870, Catalyst 11.7, latest GUIMiner (Phoenix 1.5). After copying v2.0 files into "kernels\phatk" i get this messages in console: 2011-07-29 11:02:49: Listener for "itzod2": [29/07/2011 11:02:49] [4.19 Ghash/sec] [0 Accepted] [0 Rejected] [RPC (+LP)] 2011-07-29 11:02:50: Listener for "itzod2": [29/07/2011 11:02:50] Warning: work queue empty, miner is idle
No work is being done. Here's miner starting parameters: 2011-07-29 18:08:49: Running command: .\phoenix.exe -u http://****:****@lp1.itzod.ru:8344 PLATFORM=0 DEVICE=0 AGGRESSION=12 -k phatk VECTORS BFI_INT FASTLOOP=false WORKSIZE=256
Your v1.0 and Diapolo's 2011-07-17 kernel works fine. This is exactly what happens to mine too. guiminer 7-01-2011 with phoenix 1.5, using newest kernel in this thread, catalyst 11.7, win7 x64. It just spams "Warning: work queue empty, miner is idle" in console. I'm going to assume this kernel is either meant for an older miner, or its just plain broken. I'll be looking at this thread and diapolo's for an update. 12alu improvement is huge , might be able to break 470 mhash on my 5870. edit: I thought you had to declare kernel arguments -after- the -k switch and argument after to declare what kernel to use.
|
|
|
11.6 -> 11.7 experiences.
I no longer need dummy plugs. Very minimal hash speed increase (3 x sapp extreme 5830) 966.8 -> 967.0 Still 100% CPU, so affinity to 1 core still needed to save electricity.
|
|
|
Pictures?
Location?
This. I'm interested as well, but I may need to be walked through the escrow thinger.
|
|
|
Hi,
A few questions....
What's the power draw at the wall? Are the cards o'clocked/overvolted to get 1500 M/Hs? Also how did you determine 1500 MH/s, what does each card get?
And lastly, how are the cards mounted?
Thanks!
Sounds like he assumed non-overclocked. My 5830s with stock speeds get about 243MHash/sec.
|
|
|
When I went to check out, only saw canada for shipping. That made me very sad
|
|
|
|