normally near the End of the day payments are dispersed. that I've told him already. Still I wonder what's the threshold, 0.0015 or 0.0020... And mostly ppl don't care about editing posts so there's evil overquoting goin' on  I did say originally 0.02 but I decided 0.015 and didn't update cause I was in the middle of trying to fix issues. And for those that keep logging tickets about their Sunday payment. It's still Sunday and still 2 payouts left. I will happen, and it will be the last Sunday payment of the day. Thanks for fixing the connection issues we were having a few days ago... ive had 0 disconnects on equihash or any other algo for over 24hrs... feels back to normal |
|
|
|
|
Would love to use this to monitor my rigs, i currently run NemoMulti-algo miner on all of them, it switches between ccminerAlexis78, ccminerTpruvot,ccminerKlaust, and EWBF
|
|
|
|
Anyone have any ideas of what im doing wrong?
When you setup the profit-switching Managed Miner, what profit-switching profile did you select? And on that profit-switching profile, did you put in your hashrate for the Skein algorithm? There's a built in nVidia profit-switching profile, you should edit that profile and input any known hashrates your card can do. I'm assuming you are using an nVidia card since you are mining Skein. There's also a built-in AMD GPU profile. You can either put in your real-world hashrates, or for simplicity's sake I use whattomine's generic rates for a specific card I have tried it both ways, i have checked all the algo's in Nvidia profile, then started it up, it kept trying to mine Scrypt.. spent hours unsure how to stop it.. because under algo tab it was never selected.. finally after hours i just went in under advanced mining software section and disabled the algo's except the ones i wanted to mine, which did stop it from trying to mine Scrypt... but it would never switch... each time i would restart the miner it would mine the most profitable one at the time.. but i let it run overnight and it never once switched algo's it kept mining the same algo unless i restarted the miner... then it would switch.... I have kinda given up setting up the software.. i tried to uninstall it, then re-install to see if that would fix the issues i was having, it remembered my settings after all of that.. so i just went back to running my modded Nemo-miner for now.. was truly wanting to use this software so i can mine both zpool and MPH, because there are days algo's on MPH are very profitable.. but zpool has them listed as minimal profit.. Question: since i am running Nemominer can i set this software up to monitor them using the external miner section? if i can it would make life easier being able to see the miners all from one screen.. In the future i would really like to try again with this software, maybe ive found a bug in the software idk.. if someone knowledgable can help me setup one rig, i would love to make like a small video walking people through it to help others.. because numerous people have mentioned over on another post section of this site that they were unable to get this software working and either used MPH multi-miner, or Nemo multi-miner.... |
|
|
|
its 4 x Asus Turbo 1080ti's Neoscrypt there is a bad speed. 1х1080ti = 1.6Mh/s Ccminer-2.1-tribus -i 22 1870 GPU / 5500 mem For 1080ti it is better: Neoscrypt - Ccminer-2.1-tribus -i 22 best speed for 1080ti MyriadGroesti - CCminerKlaust -i 25 1-2mh/s speed is better than CCminerAlexis78 Can you link to the CCminer 2.1 Tribus, im not seeing it in a quick google search except many people just talking about it on Demaritus algo One of the nice features about Nemo's miner, not sure if he intended it this way or just how Aaron built it... not sure how much came from Aaron and how much came from Nemo... but when you benchmark multiple miners on the same algo, it will auto-select the best even if you leave the algo on for lets say 2 different miners.. or atleast that is how its functioning.. so what i did was add Alexis on all the miner algo's that Tpruvot and Klaust had on, it ran benchmarking on all of them and either finished or failed the benchmark.. then selected the best miner based on the stats folder.. A test im currently doing is on the intervals... I have 4 Asus Turbo 1080ti's set @ default interval I have 4 Asus Turbo 1080ti's set @ 600 interval 10 minutes I have 4 Asus Turbo 1080ti's set @ 6000 interval 1 hour I have 4 Gigabyte 1080ti's set @ 36000 Interval 6 hour I have 2 EVGA 1080ti's set @ 3000 interval 30 minutes I set each one up to a different wallet address on zpool Currently.... Highest earnings: 6000 interval Lowest earnings: 36000 interval Order of earnings: Highest to Lowest for past 13hours 6000 3000 600 Default 36000 |
|
|
|
Nemo good job on the latest version, its way more stable on my rigs now, i did change some of the miners back to Alexis.. but other than that.. good work... ill leave the 5 minutes on to support your work
on future updates, you may need to add some of the .dll files for the miners.. i installed this on my windows 7 boxes and had to place the .dll files in each miner folder
CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145usually fixes those error's for me.. i bought 2x evga 1080ti sc black edition today i will be working a version specifically for the 1080ti 1-3 card thats uses alexis78 i now have 1050ti's 1060's 1070's and 1080ti's.. Best Regards Nemo I have 18 x 1080ti's running off your miner at the moment... if you need any info i can provide it to you... The following combo is the best for the 1080ti's for algo's This is the rig i just got done benchmarking through teamviewer... GTX1080ti Asus Turbo's settings, 70/70/+200/+600/Manual fan curve  Thanks for sharing your information, i am not sure if the speed test you made with a single TI or multiply TIs. If that's a single TI doing more than 1gh on Lbry that's just not right, am i missing something ? Edit : i own one FTW3 doing max 530 on Lbry on Nicehash if that matters lol its 4 x Asus Turbo 1080ti's |
|
|
|
This is the best algo list i can come up with.. |
|
|
|
Nemo good job on the latest version, its way more stable on my rigs now, i did change some of the miners back to Alexis.. but other than that.. good work... ill leave the 5 minutes on to support your work
on future updates, you may need to add some of the .dll files for the miners.. i installed this on my windows 7 boxes and had to place the .dll files in each miner folder
CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145usually fixes those error's for me.. i bought 2x evga 1080ti sc black edition today i will be working a version specifically for the 1080ti 1-3 card thats uses alexis78 i now have 1050ti's 1060's 1070's and 1080ti's.. Best Regards Nemo I have 18 x 1080ti's running off your miner at the moment... if you need any info i can provide it to you... The following combo is the best for the 1080ti's for algo's This is the rig i just got done benchmarking through teamviewer... GTX1080ti Asus Turbo's settings, 70/70/+200/+600/Manual fan curve |
|
|
|
so i have been mining for a while on nicehash to their wallet. I wanna try out some other places. Where do you mine with your 1080 ti + 1070 rig? I see zpool being mentioned here a few times. How are they compared to nicehash?
I would highly recommend something like MiningPoolHub for the time being over Zpool... the last 3-4 days has really cost me a lot of earnings while trying to use zpool.. Its been crashing a lot with random periods with algo's not connecting for hours and when you run a multi-algo miner like i do.. if the algo the pool is stating is the most profitable is unable to be connected to.. your miner literally sits there for minutes to hours trying to connect to it over and over tell it either connects or another algo is decided as more profitable... i switched over to MPH for the past 24hrs and left 1 rig on Zpool to see the difference in profits... both are basically within 5% of one another on hashrates.. I would never recommend any coin or algo swapping pool that uses PPLNS payout like MiningPoolHub, I do like the pool but when I mine there I just mine one algo and one coin otherwise you shoot yourself in the foot. This is why i have switching interval coded at 6000, so once an hour it switches to the most profitable algo... |
|
|
|
Nemo good job on the latest version, its way more stable on my rigs now, i did change some of the miners back to Alexis.. but other than that.. good work... ill leave the 5 minutes on to support your work on future updates, you may need to add some of the .dll files for the miners.. i installed this on my windows 7 boxes and had to place the .dll files in each miner folder
I'm seeing the miner switch and start a new instance every 1 minute. With startup time when starting a new algo, there's a few seconds lost every minute.
Can I set it not switch for say at least 10 minutes of being on a specific miner+algo?
yes, atm i have it set to 90secs it will check every 90 secs to see whats the most profitable algo i'll add -Interval 90 to the start.bat in next release.. if you want to change it your self go into and edit : NemosMiner-v2.0.5.ps1 find: [Parameter(Mandatory=$false)] [Int]$Interval = 90, #seconds before reading hash rate from miners change the 90 ,to how many secs you want to run before checking eg. 300=5mins 600=10mins Best Regards Nemo Just a caution to the above statement, do these steps AFTER you benchmark... i learned after an hour curious why my rigs were not benchmarking very fast... the change in interval also goes into the benchmarking period it mines for before moving on to the next algo to benchmark... |
|
|
|
|
little word of advice in regards to the T5500 combined with GTX1080ti's... i noticed a HUGE drop in hashpower between the T5500 i bought with 12GB of memory $188 version and the one with 4GB only the cheaper $163 one on like half my algo's i mine... so i looked into it... ccminer was using 100% of the memory on the 4GB rig on some algo's while only using like 40% on the other.. i moved 4GB over and it fixed the issue i was having.. gained back the missing hashrate drop...
|
|
|
|
so i have been mining for a while on nicehash to their wallet. I wanna try out some other places. Where do you mine with your 1080 ti + 1070 rig? I see zpool being mentioned here a few times. How are they compared to nicehash?
I would highly recommend something like MiningPoolHub for the time being over Zpool... the last 3-4 days has really cost me a lot of earnings while trying to use zpool.. Its been crashing a lot with random periods with algo's not connecting for hours and when you run a multi-algo miner like i do.. if the algo the pool is stating is the most profitable is unable to be connected to.. your miner literally sits there for minutes to hours trying to connect to it over and over tell it either connects or another algo is decided as more profitable... i switched over to MPH for the past 24hrs and left 1 rig on Zpool to see the difference in profits... both are basically within 5% of one another on hashrates.. |
|
|
|
Could someone assist me on setting up a profit switch miner? I have spent hours trying to set it up with no luck........  I went under Profit Profiles and i created a profile for all the Algo's i want to mine, under each one i specified which software to use, for example for skein i pointed to CCminer Alexis 1.0, and equihash i pointed to the built in miner....then i created a profit group and added all the algo's into that group. it said i had 9 miners. Then using the wizard i setup a new profit miner, under setup i pointed it to the profit group i made earlier instead of amd or nvidia.... So i started up the miner and it started on skein since it was the most profitable under online services....but the miner actually never does anything.. it just sits there and collects data, but never computes any of it and sends for acceptance... i left this for like 30 minutes this way to see if it would change and it still said 0 accepted shares.... then after 30 minutes it started up blake2s and did the same thing... mining nothing for a few minutes before i stopped it and started up my custom batch file... I am very confused on how to get profit switching working with this software, if someone could please give me a basic idea of how to get this working, because im unable to get anywhere with this....  Anyone have any ideas of what im doing wrong? |
|
|
|
Very concerned.... ive only mined 0.00491097 BTC in the last 12 hours since last payout after all the server messing up crap on 18 x 1080ti's........i restarted all the miners before i head to bed to see if maybe that fixes it.. but it concerns me because thats the lowest ive made in 6 weeks in a day.....  |
|
|
|
Could someone assist me on setting up a profit switch miner? I have spent hours trying to set it up with no luck........ I went under Profit Profiles and i created a profile for all the Algo's i want to mine, under each one i specified which software to use, for example for skein i pointed to CCminer Alexis 1.0, and equihash i pointed to the built in miner....then i created a profit group and added all the algo's into that group. it said i had 9 miners. Then using the wizard i setup a new profit miner, under setup i pointed it to the profit group i made earlier instead of amd or nvidia.... So i started up the miner and it started on skein since it was the most profitable under online services....but the miner actually never does anything.. it just sits there and collects data, but never computes any of it and sends for acceptance... i left this for like 30 minutes this way to see if it would change and it still said 0 accepted shares.... then after 30 minutes it started up blake2s and did the same thing... mining nothing for a few minutes before i stopped it and started up my custom batch file... I am very confused on how to get profit switching working with this software, if someone could please give me a basic idea of how to get this working, because im unable to get anywhere with this.... |
|
|
|
|
has the support for this on ccminers been added yet? dont see it listed on first page yet....
|
|
|
|
The multialgo 12016 port never seems to work for me. Try using the 17016 skein port or 20537 digibyte skein port.
ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:17016 -u user.rig -p x
I actually figured it out after over an hour of searching, i had to turn on working under hub workers, some reason it was defaulted to "no work"... by then zpool was back up so i was able to get my rigs back online through that.. but i seriously want to get a MPH set of batch files made of my custom miner files so i can switch on the fly if things go down or better yet switch over completely if profits show better on this pool... the only thing keeping me from switching so far is the lack of coins... i have asked for a handful to be added, which has been like 90% of my most profitable coins mined in the past 30 days using multi-algo on zpool... but ive not seen them added... |
|
|
|
|
Good stuff man, i wish i had the space and POWER to run more rigs.. i currently have 18 x 1080ti's running 4 per card rig mostly... i just cant seem to find any type of warehouse space worth the price to rent and the few i have found they require me to keep the roll down doors shut, which makes it a cooling nightmare....
|
|
|
|
Looks like every algo is having issues.
yup, it got a little messy with mysql, but I did find more things to fix and tune. here's to smooth sailing from now. fingers crossed. I sure hope sooo.... because with 18 GTX1080ti miners... and deducting the amount from the original payout before the reset.. im looking to only clear $20 worth of BTC today based on current balance total... gonna have to stomach this day as a wash for mining... usually i clear $125+ easily |
|
|
|
|
Random question, so currently i mine using my own batch file that i have code written to switch the OC and UV settings on the fly as it changes algo's to mine. I see GPU OC/UV is available under the $120 version, but does this allow me to change these settings on the fly per algo? i ask because in my time mining i have learned that different algo's can be OC/UV way more than others and stay stable, while others are just so unstable that minimal tuning from default settings causes them to crap out or freeze up the computer...
Example....
Rig00, my personal gaming PC
Skein, i mine it on +317 Core, -1000 Mem
Equihash, i mine on +120 Core, +650 Mem
|
|
|
|
Could someone please post a simple line of code they use to connect to MPH, i tried to use the aaronsauce stuff lastnight, it just keeps locking up my miners.. on default settings.. i have been having lots of issues with Zpool and would like to rewrite my batch files i use on zpool to use on MPH Im getting error and never connecting....  |
|
|
|
|
Show Posts
