Bitcoin Forum
May 04, 2024, 02:14:16 AM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [31] 32 33 »
601  Alternate cryptocurrencies / Mining (Altcoins) / Re: GTX1080ti's: Better Options? on: June 05, 2017, 06:05:55 PM
Thanks for the info.
@Storx and @JaredKaragen

I managed 430 sols on skein with 980Ti 205W on the wall. System is like 50-60 when idle.

How good/bad is this?

I will mine some with this gpu until I get 1080Tis.

I am not sure if your really mining Skein, sounds like Equihash or Zcash...
~ALL INFO IS USING 2 x 1080ti's~
When i first started mining on my gaming rig, i was using 591watts to get a Skein hashrate of 2033Mh/s because i was thinking overclocking is better... since then i have done so much research and now i have my 2 cards running after a few flashes running stable so far at 348watts and my hashrate went down to 1892Mh/s... but they produce about half as much heat and a lot less power over time...

One thing i have run into today tho since my NEW GPU's and PCIe risers came in the mail is the PCIe risers seem to not function on NVIDIA cards.. or i just got an entire box full of defective cards..  i have been trying to install the new GPU's in my old gaming rig to run them... all the cards work perfect in the PCIe x16/x8 slot.. but the x1 slots dont detect the GPU's and ive tried every riser i bought.. because i bought extras due to fail rates i have read about...

Ima take my main pc down sometime later after some errands and test the 1x slots on it.. as well im running over to a friends house who has 3 x (x1) slots on his motherboard.. gonna test them on his first since its easier to get to.. since my watercooling hard lines kinda blocks mine..
602  Alternate cryptocurrencies / Mining (Altcoins) / Re: GTX1080ti's: Better Options? on: June 04, 2017, 11:00:26 PM
Have a newbie question:

When I mine with this:

ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u BTC_Address -p c=BTC,skein,stats

Do I mine DGB-Skein and deposit into my BTC wallet as BTC currency? I guess.

Can I insert my Polo DGB wallet address to where it says `BTC_Address` to deposit DGB directly without any internal auto exchange?

If not how can I mine DGB-Skein without conversion?

Thanks.




From what i understand is you have to place your DGB currency wallet in "BTC_Address" and then change "c=BTC" to "c=DGB"
603  Alternate cryptocurrencies / Pools (Altcoins) / Zpool.ca Monitoring: Is there a better way? on: June 04, 2017, 08:06:12 PM
I was curious if anyone knows a better way to monitor Zpool.ca which is the pool im currently mining from. I kinda dislike the way the page they use is setup, i would much rather see the estimates of what im making in USD values per day, per month to judge faster if i need to switch coins.. right now i have to manually calculate to see which is better. also if i could do all this and view it on my smartphone through an app, that would be even better..

I miss the way Nicehash had it displayed online and in their app...
604  Alternate cryptocurrencies / Mining (Altcoins) / Re: Gtx 1080 TI rig setup idea on: June 04, 2017, 03:29:56 AM
The GTX1080ti seems to favor the Lyra2REv2 the most for me over Zcash...
Im averaging 0.00658252BTC/Day with the Pair of GTX1080ti's on Lyra2REv2/Zcash currently split 81/19 split so far on NiceHash since Monday


you can do that same earning with a single 1080ti ming skein much more profitable if you ask me, don't waste time mining lyra2v2 it's an old algo with dead coin, DGB is growing fas has better future, and if i can suggest nicehash is bad for earning it reduce your income versus normal pool earning

I am just getting started bud sorry... im just now learning how to build custom batch files to run different miners.. i currently have Skein going, ran it for 614minutes lastnight tell the miner crashed.. now im running it again.. not really sure why the miner crashed.. but trying to figure all of that out.. the rate i was getting with skein lastnight was right on par with the same profit i was seeing nicehash miner... so i hope to get this gpu dialed in.. i did noticed that some of the more profitable miners on zpool with 1080tis have their cards way turned down.. like 74% below base clocks/freq.. but they are getting nearly 5.0Mh/s per watt compared to my 3.4Mh/s per watt
Your ti brand is MSI ? Which brand is the best if you have any background knowldge about them?
Because i haven't order mine yet if that makes any difference.

It seems they all seem to run roughly within 1-3% of each other when at base clocks.. just looking on zpool.ca if you go to benchmarks, then select GTX1080ti, literally all the ones listing clocks around base clock are getting like the exact hashrate.. its really the ones who mod the settings a lot that optimize and get the most out of them it seems... but you never know what they are running in regards to settings tho...
Look at these specs


Memory clock speed is 11,000 times powerful on EVGA
can't decide which one to go with.

i think that 11,000 is a type

No it is not.

I guess not.. i just checked the rate on my MSI cards.. 11016MHz Memory Clock
605  Alternate cryptocurrencies / Mining (Altcoins) / Re: Gtx 1080 TI rig setup idea on: June 04, 2017, 03:23:34 AM
The GTX1080ti seems to favor the Lyra2REv2 the most for me over Zcash...
Im averaging 0.00658252BTC/Day with the Pair of GTX1080ti's on Lyra2REv2/Zcash currently split 81/19 split so far on NiceHash since Monday


you can do that same earning with a single 1080ti ming skein much more profitable if you ask me, don't waste time mining lyra2v2 it's an old algo with dead coin, DGB is growing fas has better future, and if i can suggest nicehash is bad for earning it reduce your income versus normal pool earning

I am just getting started bud sorry... im just now learning how to build custom batch files to run different miners.. i currently have Skein going, ran it for 614minutes lastnight tell the miner crashed.. now im running it again.. not really sure why the miner crashed.. but trying to figure all of that out.. the rate i was getting with skein lastnight was right on par with the same profit i was seeing nicehash miner... so i hope to get this gpu dialed in.. i did noticed that some of the more profitable miners on zpool with 1080tis have their cards way turned down.. like 74% below base clocks/freq.. but they are getting nearly 5.0Mh/s per watt compared to my 3.4Mh/s per watt
Your ti brand is MSI ? Which brand is the best if you have any background knowldge about them?
Because i haven't order mine yet if that makes any difference.

It seems they all seem to run roughly within 1-3% of each other when at base clocks.. just looking on zpool.ca if you go to benchmarks, then select GTX1080ti, literally all the ones listing clocks around base clock are getting like the exact hashrate.. its really the ones who mod the settings a lot that optimize and get the most out of them it seems... but you never know what they are running in regards to settings tho...
Look at these specs


Memory clock speed is 11,000 times powerful on EVGA
can't decide which one to go with.

i think that 11,000 is a type
606  Alternate cryptocurrencies / Mining (Altcoins) / Re: GTX1080ti's: Better Options? on: June 04, 2017, 02:50:28 AM
I have been mining DGB the past couple of days on my personal machine with a pair of GTX 1080 Ti GPUs. I've been using a different version of ccminer and was very pleased with it, but after seeing reports of others doing even better with alexis78's version I decided to try it out. Could someone be so kind as to post their batch file?  The .bat I was using with my other ccminer version does not seem to be compatible and my attempts at altering it have not worked thus far.  Thanks!

This is mine...
Code:
:START
ccminerAlexis78-8.08.exe -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u Insert Bitcoin wallet -p c=BTC,skien,stats
goto start
607  Alternate cryptocurrencies / Mining (Altcoins) / Re: Gtx 1080 TI rig setup idea on: June 04, 2017, 12:34:55 AM
The GTX1080ti seems to favor the Lyra2REv2 the most for me over Zcash...
Im averaging 0.00658252BTC/Day with the Pair of GTX1080ti's on Lyra2REv2/Zcash currently split 81/19 split so far on NiceHash since Monday


you can do that same earning with a single 1080ti ming skein much more profitable if you ask me, don't waste time mining lyra2v2 it's an old algo with dead coin, DGB is growing fas has better future, and if i can suggest nicehash is bad for earning it reduce your income versus normal pool earning

I am just getting started bud sorry... im just now learning how to build custom batch files to run different miners.. i currently have Skein going, ran it for 614minutes lastnight tell the miner crashed.. now im running it again.. not really sure why the miner crashed.. but trying to figure all of that out.. the rate i was getting with skein lastnight was right on par with the same profit i was seeing nicehash miner... so i hope to get this gpu dialed in.. i did noticed that some of the more profitable miners on zpool with 1080tis have their cards way turned down.. like 74% below base clocks/freq.. but they are getting nearly 5.0Mh/s per watt compared to my 3.4Mh/s per watt

what is your tdp or power setting?

try 70%

core 150
memory -150
fan manual 75%


run for an hour then try

tdp 68%
core 160
memory -160
fan manual 75%



card to card sweet spots vary

64-72% tdp
core +130 to +250
memory -100 to -500
fan 65-80% manual

I get about 880 at 175 watts.. 

you can do tdp as low as 50%  if you have heat issues it helps to do this it will lower hash a lot.


Am i reading that correctly... you - the memory... currently i have it set to 87%, core +193, Memory +507 and my Mh/s is at the highest ive averaged playing with it.. but i have not tried lowering memory at all.. just up... they are running at 38c currently in my loop
608  Alternate cryptocurrencies / Mining (Altcoins) / Re: Gtx 1080 TI rig setup idea on: June 04, 2017, 12:32:19 AM
The GTX1080ti seems to favor the Lyra2REv2 the most for me over Zcash...
Im averaging 0.00658252BTC/Day with the Pair of GTX1080ti's on Lyra2REv2/Zcash currently split 81/19 split so far on NiceHash since Monday


you can do that same earning with a single 1080ti ming skein much more profitable if you ask me, don't waste time mining lyra2v2 it's an old algo with dead coin, DGB is growing fas has better future, and if i can suggest nicehash is bad for earning it reduce your income versus normal pool earning

I am just getting started bud sorry... im just now learning how to build custom batch files to run different miners.. i currently have Skein going, ran it for 614minutes lastnight tell the miner crashed.. now im running it again.. not really sure why the miner crashed.. but trying to figure all of that out.. the rate i was getting with skein lastnight was right on par with the same profit i was seeing nicehash miner... so i hope to get this gpu dialed in.. i did noticed that some of the more profitable miners on zpool with 1080tis have their cards way turned down.. like 74% below base clocks/freq.. but they are getting nearly 5.0Mh/s per watt compared to my 3.4Mh/s per watt
Your ti brand is MSI ? Which brand is the best if you have any background knowldge about them?
Because i haven't order mine yet if that makes any difference.

It seems they all seem to run roughly within 1-3% of each other when at base clocks.. just looking on zpool.ca if you go to benchmarks, then select GTX1080ti, literally all the ones listing clocks around base clock are getting like the exact hashrate.. its really the ones who mod the settings a lot that optimize and get the most out of them it seems... but you never know what they are running in regards to settings tho...
609  Economy / Exchanges / Re: JAXX vs Coinbase: Which is better and why? on: June 03, 2017, 10:25:54 PM
i appreciate the posting of info.. it seems from the results i got from yall JAXX wallet is not all that bad, the only thing is i have never convert BTC to USD, so i wanted to make sure i get into the best wallet so i dont have issues with that later.... i just ordered all the stuff for my first 6 x GPU rig build using the BTC i already have through newegg using btc as payment.. and based off the mining results im getting on my gaming PC i am seriously thinking of investing into another 6 rig or so next week..
610  Alternate cryptocurrencies / Mining (Altcoins) / Pool Monitor on: June 03, 2017, 10:15:09 PM
I was curious if there is a good phone app to use to monitor your mining/earnings through your pool. Im currently mining ZPool and i really dislike the wallet page on the site, wish it was easier to glance at and understand like nicehash site is when i was using their miner..

on zpool.ca there is an api listed for monitoring, but i have no clue how to set it up to view it like on my phone..
Code:
http://www.zpool.ca/api/walletEx?address=WALLET_ADDRESS
611  Alternate cryptocurrencies / Mining (Altcoins) / Re: GTX1080ti's: Better Options? on: June 03, 2017, 08:44:44 PM
So...using ccminer tpruvot 2.0 cuda 8.0 in which I placed ccminerAlexis78.exe. 1080 ti, getting a hair over 1000mh/s. (Should there be any issues here I'm not considering? Compatibility and so on?)

I point it to miningpoolhub, no autoexchange (i get the coins in poloniex and convert them there).
1st day ok, second day around 15% over what calculator says, 3rd day going down, 4th day even lower (about 10% lower than whattomine).

So is the fluctuation in coins produced/day that large? Is the diff changing that fast? Bad pool?
It seems I'm missing something here...

What is your actual wallet numbers? The reason i ask this is because according to the page of the mining pool i was using zpool.ca it was estimating im going to make like 28-30usd/day worth of BTC with my pair of GTX1080ti's... but the actual BTC i made in 14 hours mining was on par to only make $11/day... so the estimation vs actual earnings are WAY OFF>...... and i was bouncing between 900-1000Mh/s on each card... so 1800-2000Mh/s



also could you give your input on why you went the no autoexchange route? just trying to learn from all of this... Im currently using JAXX wallet with auto into BTC....

I try to exchange the coins myself. If you hold on to them a little bit you can get more BTC for them. DGB price went up the past day from 1087 sats to 1460 and climbing. When I sell all the DGB  I made in one day now, I get more btc. Makes sense to go this route. You can even hold for longer if you think price will go up more.

The pool still shows lower numbers but within $1/day difference. You should be getting whatever whattomine says for your hashrate.
This is very close to what I'm getting: http://whattomine.com/coins/114-dgb-skein?utf8=%E2%9C%93&hr=1000.0&p=250.0&fee=5&cost=0.0&hcost=0.0&commit=Calculate

When i go to Zpool.ca and look under benchmarks the number on there is always lower than what the miner reports inside the window (1980-2020Mh/s)... on zpool.ca under benchmarks, its showing 1898.63Mh/s for Skein

Pools calculate your hashrate based on submitted shares. The 24/48 hours earnings should match closely what you're supposed to get + there are more rejects with skein (about 5%) due to very short block time.

Got 518 DGB for yesterday with one 1080ti. That's about $19 as of now. I'm getting $20 with 4 x 480's. Strange times in the mining game  Cheesy

http://imgur.com/a/lP5AJ


Hey what software is that your using to view your miner status?
612  Alternate cryptocurrencies / Mining (Altcoins) / Re: Gtx 1080 TI rig setup idea on: June 03, 2017, 07:31:36 PM
The GTX1080ti seems to favor the Lyra2REv2 the most for me over Zcash...
Im averaging 0.00658252BTC/Day with the Pair of GTX1080ti's on Lyra2REv2/Zcash currently split 81/19 split so far on NiceHash since Monday


you can do that same earning with a single 1080ti ming skein much more profitable if you ask me, don't waste time mining lyra2v2 it's an old algo with dead coin, DGB is growing fas has better future, and if i can suggest nicehash is bad for earning it reduce your income versus normal pool earning

I am just getting started bud sorry... im just now learning how to build custom batch files to run different miners.. i currently have Skein going, ran it for 614minutes lastnight tell the miner crashed.. now im running it again.. not really sure why the miner crashed.. but trying to figure all of that out.. the rate i was getting with skein lastnight was right on par with the same profit i was seeing nicehash miner... so i hope to get this gpu dialed in.. i did noticed that some of the more profitable miners on zpool with 1080tis have their cards way turned down.. like 74% below base clocks/freq.. but they are getting nearly 5.0Mh/s per watt compared to my 3.4Mh/s per watt
613  Alternate cryptocurrencies / Mining (Altcoins) / Re: GTX1080ti's: Better Options? on: June 03, 2017, 06:57:43 PM
if you weren't on the alexis build, you were probably not earning as much as you could....  there's rumor of another build, but so far its just smoke and mirrors....   people are becoming more greedy when sharing with the community.

Hey bud, could you help me a little in regards to the NemosMiner-v1.7.4-ZPOOL...

I followed the directions, added my BTC address, then "REM" all algo's to run 1 at a time to get the hashrates to place in the tuning line. I for the life of me cant get the miner to run by "REM" all except SKEIN, it just fails to start... the only way i can get SKEIN to work is by allowing atleast 2 algo's open to cycle through, but the miner switches between the 2.. i dont know how to get it to run ONLY skein....

If i cant only run skein, then i want to finish tuning the hashtag line, so it properly runs the most profitable one..., but for the life of me i cant get any algo to run except Lyra2v2 and Skein... all others fail when starting the miner.. so right now i managed to get it to stay on Skein, by setting the lyra one lower than it should be.. but i would like to get equihash and lyra algo's figured out on running them, because when i go to what to mine.. and plug in my hashing rates right now it is saying equihash is my most profitable algo to mine..

I dont know how to insert the code like you do, but basically this is how its setup



post the copy of your modified batch this way next time....

use the
Code:
code posting feature
when you post it.  Much easier than a photo.

you didn't remove the algos from the password.  I see you have lyra2 and skien enabled....   but the pool thinks you have ALL the other algos enabled.

Should look like this for your config:
Code:
SET PASS=C=BTC,lyra2v2=68.34,skien=969.54,stats

The pool was probably trying to throw you on a disabled algo and leaving the stratum on your desired algos disconnected....

If you want to run one algo, I highly suggest just making a single batch per algo to test....


I.E.
skienonly.bat
Code:
:START
ccminerAlexis78.exe -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u 1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP -p c=BTC,skien,stats
goto start





Thanks for the help man, i would like to figure out how to add a few of the coins in the NemosMiner and get them working correctly. I just tried to delete all coins i dont want to mine from the password area, it would not run at all.. i had only 4 coins listed, Equihash, Lyra2REv2, Skein, and Lbyr

I noticed that Equihash is not in the pass line with the hashrates at all...

I tried running the miner seperate with custom batch file and it started just fine, just the coin doesnt start in the nemosminer....
Code:
:START
zminer.exe -a equihash -o stratum+tcp://equihash.mine.zpool.ca:2143 -u bitcoinwallet -p c=BTC,equihash,stats
goto start

Also, do you know how the algo determines when to switch coins based on profit? just want to understand more on how the batch file does this..
614  Alternate cryptocurrencies / Mining (Altcoins) / Re: GTX1080ti's: Better Options? on: June 03, 2017, 06:45:50 PM
So...using ccminer tpruvot 2.0 cuda 8.0 in which I placed ccminerAlexis78.exe. 1080 ti, getting a hair over 1000mh/s. (Should there be any issues here I'm not considering? Compatibility and so on?)

I point it to miningpoolhub, no autoexchange (i get the coins in poloniex and convert them there).
1st day ok, second day around 15% over what calculator says, 3rd day going down, 4th day even lower (about 10% lower than whattomine).

So is the fluctuation in coins produced/day that large? Is the diff changing that fast? Bad pool?
It seems I'm missing something here...

What is your actual wallet numbers? The reason i ask this is because according to the page of the mining pool i was using zpool.ca it was estimating im going to make like 28-30usd/day worth of BTC with my pair of GTX1080ti's... but the actual BTC i made in 14 hours mining was on par to only make $11/day... so the estimation vs actual earnings are WAY OFF>...... and i was bouncing between 900-1000Mh/s on each card... so 1800-2000Mh/s



also could you give your input on why you went the no autoexchange route? just trying to learn from all of this... Im currently using JAXX wallet with auto into BTC....

I try to exchange the coins myself. If you hold on to them a little bit you can get more BTC for them. DGB price went up the past day from 1087 sats to 1460 and climbing. When I sell all the DGB  I made in one day now, I get more btc. Makes sense to go this route. You can even hold for longer if you think price will go up more.

The pool still shows lower numbers but within $1/day difference. You should be getting whatever whattomine says for your hashrate.
This is very close to what I'm getting: http://whattomine.com/coins/114-dgb-skein?utf8=%E2%9C%93&hr=1000.0&p=250.0&fee=5&cost=0.0&hcost=0.0&commit=Calculate

When i go to Zpool.ca and look under benchmarks the number on there is always lower than what the miner reports inside the window (1980-2020Mh/s)... on zpool.ca under benchmarks, its showing 1898.63Mh/s for Skein

Pools calculate your hashrate based on submitted shares. The 24/48 hours earnings should match closely what you're supposed to get + there are more rejects with skein (about 5%) due to very short block time.

Got 518 DGB for yesterday with one 1080ti. That's about $19 as of now. I'm getting $20 with 4 x 480's. Strange times in the mining game  Cheesy

http://imgur.com/a/lP5AJ


I would love to chat with you more on how your managing this if you dont mind.. i ran skein lastnight for 614minutes before it crashed using the neominer software.. im assuming i have the batch file all messed up which confused it at one point and it crashed..

based off the 614 minutes my pair of 1080tis were up and running in the software, it says i earned 0.00373776 (roughly $22.70USD/day estimate) on zpool.ca over that period, and im not even sure if that is the true amount i could have earned, because throughout the night it switched to lyra2REv2 a few times and had interruption errors and cycled in that state for a while tell it would finally start mining again..

I just created a new batch file from the help i got earlier to just mine Skein only and not use the multi-algo batch file.. if the profits continue to be the same, i should make around $22/day vs $17/day i was getting with Nicehash
615  Alternate cryptocurrencies / Mining (Altcoins) / Re: GTX1080ti's: Better Options? on: June 03, 2017, 07:44:23 AM
So...using ccminer tpruvot 2.0 cuda 8.0 in which I placed ccminerAlexis78.exe. 1080 ti, getting a hair over 1000mh/s. (Should there be any issues here I'm not considering? Compatibility and so on?)

I point it to miningpoolhub, no autoexchange (i get the coins in poloniex and convert them there).
1st day ok, second day around 15% over what calculator says, 3rd day going down, 4th day even lower (about 10% lower than whattomine).

So is the fluctuation in coins produced/day that large? Is the diff changing that fast? Bad pool?
It seems I'm missing something here...

What is your actual wallet numbers? The reason i ask this is because according to the page of the mining pool i was using zpool.ca it was estimating im going to make like 28-30usd/day worth of BTC with my pair of GTX1080ti's... but the actual BTC i made in 14 hours mining was on par to only make $11/day... so the estimation vs actual earnings are WAY OFF>...... and i was bouncing between 900-1000Mh/s on each card... so 1800-2000Mh/s



also could you give your input on why you went the no autoexchange route? just trying to learn from all of this... Im currently using JAXX wallet with auto into BTC....

I try to exchange the coins myself. If you hold on to them a little bit you can get more BTC for them. DGB price went up the past day from 1087 sats to 1460 and climbing. When I sell all the DGB  I made in one day now, I get more btc. Makes sense to go this route. You can even hold for longer if you think price will go up more.

The pool still shows lower numbers but within $1/day difference. You should be getting whatever whattomine says for your hashrate.
This is very close to what I'm getting: http://whattomine.com/coins/114-dgb-skein?utf8=%E2%9C%93&hr=1000.0&p=250.0&fee=5&cost=0.0&hcost=0.0&commit=Calculate

When i go to Zpool.ca and look under benchmarks the number on there is always lower than what the miner reports inside the window (1980-2020Mh/s)... on zpool.ca under benchmarks, its showing 1898.63Mh/s for Skein
616  Alternate cryptocurrencies / Mining (Altcoins) / Re: GTX1080ti's: Better Options? on: June 03, 2017, 07:41:38 AM
if you weren't on the alexis build, you were probably not earning as much as you could....  there's rumor of another build, but so far its just smoke and mirrors....   people are becoming more greedy when sharing with the community.

Hey bud, could you help me a little in regards to the NemosMiner-v1.7.4-ZPOOL...

I followed the directions, added my BTC address, then "REM" all algo's to run 1 at a time to get the hashrates to place in the tuning line. I for the life of me cant get the miner to run by "REM" all except SKEIN, it just fails to start... the only way i can get SKEIN to work is by allowing atleast 2 algo's open to cycle through, but the miner switches between the 2.. i dont know how to get it to run ONLY skein....

If i cant only run skein, then i want to finish tuning the hashtag line, so it properly runs the most profitable one..., but for the life of me i cant get any algo to run except Lyra2v2 and Skein... all others fail when starting the miner.. so right now i managed to get it to stay on Skein, by setting the lyra one lower than it should be.. but i would like to get equihash and lyra algo's figured out on running them, because when i go to what to mine.. and plug in my hashing rates right now it is saying equihash is my most profitable algo to mine..

I dont know how to insert the code like you do, but basically this is how its setup


617  Alternate cryptocurrencies / Mining (Altcoins) / Re: GTX1080ti's: Better Options? on: June 03, 2017, 03:09:34 AM
After much digging around, I was able to find this link buried a few layers deep (or just confusing to trail) :

NemosMiner-v1.7.4-ZPOOL: https://mega.nz/#F!5vIGUCzC!nLsQtAwDRiV8MYA_P-q9yg

That link can change over time as it has a few times before.   That's why I only reference to look for his thread, and it's right up top on his first post.

I will personally comment:   On zpool:  there are good days and bad days.  Just the same as any other pool.   But Ill repeat;  the good days outweigh the bad days.  If you were on the lyra2v2 port;  you would feel this issue 10x as more like I did before I swapped to skien.

The EXACT point when people started accusing zpool of stealing is when the altcoin market was reaching it's all time low and BTC was worth just a little over $200.  It's easy to blame the pool when you have a lack of knowledge.    Around this same time, the pool code was updated, and the graphs were now showing the rejects on the graph as well.  This freaked the living crap out of people because it wasn't relative to the coin's hashrate;  one reject on a very low hashrate algo (like cpu algos) would cause the whole graph to be superseded by the larger valued reject number (1-10% instead of the share of .01%, etc).   Through this time, people were pointing wild fingers, and probably blaming the pool for them being on a non-profitable algo.

Remember;  people create their own optimized miners and run them to get a better cut of the earnings:  more profit from your pocket.  when you finally catch up, suddenly it doesn't seem so bad.   This is another VERY key element to this madness.

Third:  PEople base shit off of SPECULATION posted on other sites that do contain a LARGE amount of POSSIBLE error since it is going across many platforms and algos that all contain their own errors and thus it can compound the error GREATLY.    This, with enough research and critical thinking can be seen and understood; on top of being logical.  I.E.  the people who have personally told me that whattomine reported less earnings than they actually received.


Now;  let's consider the troll factor:   Whales buy, and convince you to get on board enough for them to sell at a profit.    Who runs whattomine?
 Where were their profit stakes at those points in time?  Would it make sense to sway people away from what you want to do so you can buy in lower, then recommend it later to sell higher?Huh  this makes PERFECT and REASONABLE sense.

You guys have to look past what's in front of you and look deeper to what you don't fully understand.   You can't form a conclusion on your math for yesterday, just because your test of the next day came out different then the day before.... etc.   Remember;  I keep repeating:  The good days outweigh the bad.  It fluctuates.

I do remember seeing one test that bothered me;  which was someone mining a one coin algo, earning ~90-95% of the rewards, getting paid out in that specific coin, and getting paid less than originally was unconfirmed.....   But considering the pool gets paid in BTC....  some has to be exchanged to equal the pool's percentage...  which means selling at lower than market "sell" rates and fulfilling a lower buy order in order to payout the pool and the miner..... making a minimum sized sell order, etc.... it adds up.   That's one way I could have understood that happening.... but also;  the guy was not 100% of shares.... so his diagnostic was flawed, because he was basing his hypothesis on how the pool works on solely that concept (I should have gotten all the rewards, which is false).

Another thing I keep mentioning, and seeing, is when pool hashrate for an algo crests a certain amount;  profitability drops a bit and luck smooths out to being less noticeable just like when difficulty shoots up..  When the skien pool was 10-30Gh, I was making a killing.   Now that hashrate is ~10x that, It's less profit; and the coins are worth buttloads more (DGB anyone?).    This is a complete fact in my eyes.   I am almost thinking of getting a group of people on board for a test;  see if crackfoo will create a second skien wallet, on a separate port, and have ~10-20Gh of hash dedicated to that port only.   We can compare this to the high hash port and test my hypothesis.....   But I am still working out the details on this.  When I was making ~10-15% pool hashrate on the same gear I am running now;  (before calling you guys to come earn) I seriously made a killing compared to any other algo and profitability went over 0.007mbtc/mh/day.

Sorry for caps guys, but it's for emphasis and I don't feel like adding
Code:
[code]
all over the place..[/code]


Thanks for explaining things, i am not downing Skein at all or Zpool.ca, i just have no clue why my earnings were so low.. im not sure if its the miner i tested, a setting needing changed, or just a connection issue.. just was very confused on the super low rates, so tell i get it figured out and test the other miner listed above im just defaulting back to the one that is running most stable and consistent for me at the time while im busy away from home working.. If Skein is truly more profitable, you bet your ass i want to get this figured out so i can jump on that mining train....
618  Alternate cryptocurrencies / Mining (Altcoins) / Re: Gtx 1080 TI rig setup idea on: June 03, 2017, 02:59:06 AM
The GTX1080ti seems to favor the Lyra2REv2 the most for me over Zcash...
Im averaging 0.00658252BTC/Day with the Pair of GTX1080ti's on Lyra2REv2/Zcash currently split 81/19 split so far on NiceHash since Monday
619  Alternate cryptocurrencies / Mining (Altcoins) / Re: Gtx 1080 TI rig setup idea on: June 03, 2017, 02:23:57 AM
I am actually interested in the knowledge of what is needed in mining rigs also lol...

I have been experimenting with my Gaming Rig with a pair of GTX1080ti's... so far 90% of the post on this site will have nothing to do with you it seems.. the gtx1080ti is either not supported enough or just not a good card to mine with for the time being.. because many of the people i talk to are hashing out nearly as much as me on RX580's with bios mods as im getting on my 3x more expensive cards.. most miners i get memory count errors.. something about the memory running at 11gb/s messes up the miners.. i actually get better performance so far with the memory detuned to 8gb/s from a write up i came across... i went from getting 1-5% errors to now 0, with more miners actually starting for me compared to before..

After all the negative i just stated, there is not a single vendor out there selling any RX400/500 cards right now.. so today i bought 4 more GTX1080ti's.. i know my current gaming rig can support 1 more, so ill add a 3rd to it.. the other 3 im thinking ill put on risers on my old gaming pc, which is a intel i5 with old ddr3 memory.. i just gotta pickup the risers and psu for it..

In regards to parts i have come across that are getting a lot of attention in the multi gpu rigs, i noticed many run this PSU combo and get amazing quality in power.. might want to look into it.. i have no experience in regards to go that this route.. gonna order one just to play with to see how difficult it is to use compared to a normal off the shelf psu... its a server grade PSU, ive read that its rated at 80 rating Platinum 1200watts for under $65 bucks...
https://www.amazon.com/dp/B007JNUSJY//ref=cm_sw_su_dp
http://www.parallelminer.com/product/x5-breakout-board-adapter-compatible-with-hp-1200-watt-dps-1200fb/
http://www.parallelminer.com/product/24-inch-16awg-6-pin-male-to-8-pin-62-male-pcie-power-cable/
620  Alternate cryptocurrencies / Mining (Altcoins) / Re: Help - Best settings for Gigabyte 1080 TI on: June 03, 2017, 12:40:59 AM
Would love to compare numbers with you, i have 2 x MSI Armor GTX 1080ti's currently running as we speak, i started mining with my gaming pc just to test the waters which is watercooled, ive been playing around with different miners and i cant seem to get the GTX1080ti to work on most miners, the GPU's come up as error because its apparently an issue with seeing the memory on the GPU, so the miner sees 0GB available and just runs into errors.. the only stable miner i have come across so far is NiceHash and its been going stable for 23hrs now since starting it.. I tweaked the numbers in Afterburner today to OC the cards and im getting 1337SOL/s on Equihash on NiceHash and 131MH/s on Lyra2REv2, which seems to be the top 2 so far out of the 11 listed to mine as most profitable.. My setup is running stable at 45c with the OC settings. I setup my buddies computer today who has the same MSI Armor 1080ti as me, but on air only and his rig was only pulling 570ish SOL/s @ 80c on Equihash and 60MH/s on Lyra2REv2...

Im told the Nvidia cards are best on Skein currently, but out of all the searching i have been doing, the writeup i did find to run it on a modified version of ccminer, i cant get it to mine, it just goes into errors....


That seems to be solid results and low temps! https://bitcointalk.org/index.php?topic=1854250.0 have you checked nvoc out? It is what I am planning to run my cards off of

I have not looked into that one, i am mining on my Personal Gaming Rig which is on Windows 10, i do want to get into Linux mining in the future on future builds.. because buying windows for each rig would get costly...

I did manage to get 2 other miners operating on the 1080ti's over on my post.. i posted up my results.. 1 is mining EXTREMELY effecient... because it consumes roughly 49% left power than the other 2 miners.. but its producing only 2/3rds the profit as the other 2... so there are some positives and negatives to it.. i was told if i was to adjust the settings of my cards to work better with the miner i could possibly gain the last 1/3rd of profit back and maybe be under 80% power consumption as the other 2 miners...

I finally got Skein mining going lastnight.. ran it for 14 hours, but the profits i was seeing were not really adding up to the hashpower the miner was telling me i was computing.. the differences were just to far.. something is going on between the miner and the mining pool.. i may try it on another pool to see if the results are consistent.. if the actual profits earned matched the profit calculator based on hashpower reported and power usage.. i should see WAY more earned coin profits... and it would be the BEST coin to mine by a long shot.. but i ran the numbers on 3 different sites based on the hashpower numbers i was reporting and all 3 sites say i should be earning at least twice the coin i was actually earning.. another member on here who is mining the same pool and coin stated today he has been seeing very similar earnings as i reported.. so either the hashpower is falsely reported on the miner or the calculators are wrong..
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [31] 32 33 »
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!