[ANN][DCR] Decred - Community Governance | Bitcoin Devs | Lightning Network

[IncludeBeer]

Anyone running R9 280x rigs against Decred?  What is your efficiency (hashes/watts)?

Debating what to put in a rig i'm building...

[1714304937]

1714304937

[1714304937]

1714304937

[1714304937]

1714304937

[1714304937]

1714304937

[1714304937]

1714304937

[Flomess]

Hey guys,

I just started mining DCR and I have already got some questions.

I use cgminer 3.7.2 which shows me a speed of 1,3 Gh/s but my pool says only ~ 0,5 Gh/s.
There are different ports for different difficultys. I'm in difficulty 1 - should I change to something higher?

I get a lot of "unknown-work" shares... that's not good I think - anything I can do here?
I had 35 accepted and 26 unaccpted... changed to diff. 8 now which is shown as diff 1,04K but as it seems no difference - still unknown-work shares...

I'm looking for a mining calculator - can anyone provide me a site with a calculator?

I have 1,3 Gh/s and i use diff 4.
For the "unknown-work" try adding "--scan-time 2 --queue 0" at the end of your conf file

[Ayers]

Anyone running R9 280x rigs against Decred?  What is your efficiency (hashes/watts)?

Debating what to put in a rig i'm building...

if you find them for cheap go for them, but i usually like nvidia more for decred, amd seems better on ethereum

[1337leet]

I just ordered 2 6990's let's see what they can do with their dual GPU.

[sava45]

I just ordered 2 6990's let's see what they can do with their dual GPU.

Burn

[1337leet]

I just ordered 2 6990's let's see what they can do with their dual GPU.

Burn

Yes - burn energy.
But also create a lot of DCR I hope.

Btw I have got a little problem with my miner.
I use cgminer and I get a message "Pool 0 can not provide work fast enough" like every 30 seconds.

What's the problem here?

[sava45]

I just ordered 2 6990's let's see what they can do with their dual GPU.

Burn

Yes - burn energy.
But also create a lot of DCR I hope.

Btw I have got a little problem with my miner.
I use cgminer and I get a message "Pool 0 can not provide work fast enough" like every 30 seconds.

What's the problem here?

Config 7950
"intensity" : "11",
"vectors" : "1",
"worksize" : "64",
"kernel" : "blake256",
"gpu-engine" : "0-980",


"auto-fan" : true,
"gpu-fan" : "0-85",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "2",
"blake256" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

[decred]

The following blocks were mined by miners running an older version of dcrd.

Miners should make sure they are running v0.0.7.

$ dcrd -V
dcrd version 0.0.7-beta

9436 00000000000000e5848de57673a66d2c396713326e7d63080be4a97de01c0e64
9452 0000000000002aba60719c9e2f5ab57c5fe66b36d0231497c2d53fb24386dc4c
9463 00000000000026660c3dbaecbbdba3719b8015c03d31649b47c253498c66a987
9466 00000000000028970dfa5923499c7a37a01907e8c5185609ecb5953201279988
9577 00000000000008f55ef0005ac78e45699bc6c8fea8ac010badba322a0582bc61
9616 00000000000005bf98e9720375305f3f934fcab932da7637fb18ac125f5d5848
9681 0000000000001a683ab6d0d68817ce2b372a77c6c94ecfe7ad8502b2a986ab15
9760 00000000000013fe6f9d8208a99c1e91294700e98b8fc7b8d3d1afd19687fded
9773 0000000000002137479e0a2bde7040ae01f92d4311ee3a3fe8c31d0b8d17209d
9832 0000000000002e8901720c9e009723222cace34b894cc39668fe1c26d2d2ab08
9908 00000000000007f8332bf880ea137c96b3a871ad9bb33238c6c312e8d6069b4e
9933 0000000000000997590751eea9f5568e816dd9c2768c89f325d3601bc909bd68
10078 0000000000000cd43cbf2a7056dd87bb3bf39c38b5065bf7778d14403e18a642
10097 0000000000001629b68306902347170f7d7d68c53ab2ffa1778b421f0a679924
10130 0000000000000cd147b1c3ca8bc1143576b3da988655d1ecbf8411e83933615d
10133 00000000000033787924b477d210f1e15ce93831f5c995815ccc4b4e117d7569
10251 0000000000000e8bdec13d9f75122ed9acfbaf30ca92b299b2d0aa5e58fe5fe1
10276 0000000000003cdaa2d0cff4ae9af98d2130341e38c7dada1c89b6e5c7ad245e

[_ingsoc]

A quick update on the situation with the stake pool. An issue in v0.0.6 meant the stake pool's 1-of-2 multisig addresses were getting rejected by mainnet's IsStandard function, which is not used on testnet. This led to every dcrd's mempool rejecting the votes from stake pool - and not being mined. All mining pool operators were contacted immediately and were extremely helpful and cooperative in upgrading to v0.0.7 which resolved the issue. Unfortunately, some miners have not yet upgraded, so some votes are still missed, however, the majority of votes are being mined and increasing steadily.

As the stake pool is operated by c0, PoW miners will be compensated for lost subsidy up to March 11th, 2016 (06:00 AM UTC) and PoS voters will be compensated for all missed votes or until the project is successful in getting miners responsible for these blocks being solved to upgrade to v0.0.7 or later. Compensation will not come from bring-up DCR nor will it come from the development subsidy. DCR will be purchased for the purpose of compensation. Thank you for your patience and understanding. If we continue to work together as a community as we have on this issue, Decred will continue to improve!

[Maicol792]

A quick update on the situation with the stake pool. An issue in v0.0.6 meant the stake pool's 1-of-2 multisig addresses were getting rejected by mainnet's IsStandard function, which is not used on testnet. This led to every dcrd's mempool rejecting the votes from stake pool - and not being mined. All mining pool operators were contacted immediately and were extremely helpful and cooperative in upgrading to v0.0.7 which resolved the issue. Unfortunately, some miners have not yet upgraded, so some votes are still missed, however, the majority of votes are being mined and increasing steadily.

As the stake pool is operated by c0, PoW miners will be compensated for lost subsidy up to March 11th, 2016 (06:00 AM UTC) and PoS voters will be compensated for all missed votes or until the project is successful in getting miners responsible for these blocks being solved to upgrade to v0.0.7 or later. Compensation will not come from bring-up DCR nor will it come from the development subsidy. DCR will be purchased for the purpose of compensation. Thank you for your patience and understanding. If we continue to work together as a community as we have on this issue, Decred will continue to improve!

Thanks great _ingsoc great Decred and great dev Group :-)

[ray88]

My mod is the fastest. here is version #4

Hello sp_,
can you tell us what are your clock frequencies. Thanks

[revelacaogr]

ETA for the wallet pls?

[1337leet]

One 980ti does 2,7 Gh/s ?! WTF

[indiemax]

Is it safe to remove from exchange to the web/browser wallet?

[1337leet]

I have got a problem.

I use Pool Suprnova and my miner tells me "Pool 0 not providing work fast enough" all few seconds and the hashrate decreses by 50% and climbs again.

That's super annyoing and it costs a lot of hashpower.

I changed the Port to another diff. but still the same problem.

Is it a problem with the pool or with my miner?

I use cgminer 3.7.2 on Windows 7 64 bit.

[crackfoo]

I have got a problem.

I use Pool Suprnova and my miner tells me "Pool 0 not providing work fast enough" all few seconds and the hashrate decreses by 50% and climbs again.

That's super annyoing and it costs a lot of hashpower.

I changed the Port to another diff. but still the same problem.

Is it a problem with the pool or with my miner?

I use cgminer 3.7.2 on Windows 7 64 bit.

sent PM as well, but have you tried another pool? Would be a good test to confirm if it's you or the pool.

[1337leet]

I have got a problem.

I use Pool Suprnova and my miner tells me "Pool 0 not providing work fast enough" all few seconds and the hashrate decreses by 50% and climbs again.

That's super annyoing and it costs a lot of hashpower.

I changed the Port to another diff. but still the same problem.

Is it a problem with the pool or with my miner?

I use cgminer 3.7.2 on Windows 7 64 bit.

sent PM as well, but have you tried another pool? Would be a good test to confirm if it's you or the pool.

Wolf`helped me out in irc.
-queue 2 solved the problem

[sp_]

My mod is the fastest. here is version #4

Hello sp_,
can you tell us what are your clock frequencies. Thanks

Release 3 is slow. Release 4 does 2.9 mhash on the 980ti

[sp_]

One 980ti does 2,7 Gh/s ?! WTF

No it does 2.9. With more work it will do over 3 ghash

[Praxis]

I remember seeing a  list of the top 20 Decred wallets or something but I can't find it now. Any idea how to get to that info?