Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[matmator]

...
I created a reboot.bat file in the claymore folder With this command.

Shutdown / r / f / t 1

change the reboot bat to just :

shutdown /r /t 5

I think you are putting spaces after the backslash, and that's causing the problem.

OK that works .

But how do we get claymore to start automatically?

it's possible ?

thank you

[cryptonitro]

...
I created a reboot.bat file in the claymore folder With this command.

Shutdown / r / f / t 1

change the reboot bat to just :

shutdown /r /t 5

I think you are putting spaces after the backslash, and that's causing the problem.

OK that works .

But how do we get claymore to start automatically?

it's possible ?

thank you

Simply add your start.bat shortcut to

Code:

C:\Users\YOURUSER\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\startup\

[dakky]

There's an easier way to open that path... at least for Win10
press Win key (between Ctrl & Alt on the left side of the keyboard) + R to open a Run window. Then type shell:startup and copy shortcut of your BAT file into that folder.

[DRKMSTR]

Hi, I have a new problem.


When I mine, one or two miners will decrease hashrate a day later.

I start at 24Mh/s and end up at 4Mh/s (or 9 sometimes), the only way to fix it is to close down the miner and re-open it.


Any suggestion on how to fix this?


Miner: RX 480 4gb running Claymore (latest) dual mining.

Crimson 16.9.2 ( or whatever the latest are), I've tried multiple drivers, no effect.

[crazyearner]

Getting problems with 7.4 seems to trigger my firewall and even aded to white list and still blocks detecting as malware

[almirfiorio]

Dear Claymore

If I mine ethereum with another currency I will not have performance loss on ethereum? What's the best coin and what's the best I can use to mine with ethereum?

im need to set anything in config.txt ?

Thanks
Almir

[maxmad_x]

How many miners and which graphics cars are finally out of work due to high electricity? Just curious and patiently waiting for this shit to start correcting itself.

Best wishes

[maxmad_x]

Hi, I have a new problem.
When I mine, one or two miners will decrease hashrate a day later.
I start at 24Mh/s and end up at 4Mh/s (or 9 sometimes), the only way to fix it is to close down the miner and re-open it.
Any suggestion on how to fix this?
Miner: RX 480 4gb running Claymore (latest) dual mining.
Crimson 16.9.2 ( or whatever the latest are), I've tried multiple drivers, no effect.

Use the remote manager and enter the target/expected hashrate there. Make it work for you by executing restart miner command or osmething of that sort.

[rhdzach]

I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x

Any help is appreciated.

[taylub]

How many miners and which graphics cars are finally out of work due to high electricity? Just curious and patiently waiting for this shit to start correcting itself.

Best wishes

https://s13.postimg.org/dh2gtmj4n/Untitled.png

hold until Feb 2017 

[ffthomas]

I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x

Any help is appreciated.

The stock card/bios should give you 24-25Mh/s. You can modify/optimize your card's bios to reach 30-31Mh/s and also lower the wattage.

[Blackmet]

I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x

Any help is appreciated.

The stock card/bios should give you 24-25Mh/s. You can modify/optimize your card's bios to reach 30-31Mh/s and also lower the wattage.

The hashrate can be enhanced by ctrl+c>ctrl+v timings in BIOS, what about the wattage? How can it be lowered?

[gribgo]

Hi! ALL!!
What people are mining with their GPU rigs at this days of prices so low?
 

[matmator]

...
I created a reboot.bat file in the claymore folder With this command.

Shutdown / r / f / t 1

change the reboot bat to just :

shutdown /r /t 5

I think you are putting spaces after the backslash, and that's causing the problem.

OK that works .

But how do we get claymore to start automatically?

it's possible ?

thank you

Simply add your start.bat shortcut to

Code:

C:\Users\YOURUSER\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\startup\

big thx 

[ffthomas]

I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x

Any help is appreciated.

The stock card/bios should give you 24-25Mh/s. You can modify/optimize your card's bios to reach 30-31Mh/s and also lower the wattage.

The hashrate can be enhanced by ctrl+c>ctrl+v timings in BIOS, what about the wattage? How can it be lowered?

You can play with the memory timings and overclock the memory frequency (and undervolt it). For lower wattage you can lower the clock and voltage of your GPU. The exact settings/modifications are different for each type of cards.

These modifications can give you better hashrate for ETH-only mining. It is unstable for ETH+DCR/SIA/LBRY dual mining and don't forget that you won't get higher hashrate with the same settings if you're mining with Equihash or other algos. These guidelines are good for Ethash.

[matmator]

I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x

Any help is appreciated.

The stock card/bios should give you 24-25Mh/s. You can modify/optimize your card's bios to reach 30-31Mh/s and also lower the wattage.

The hashrate can be enhanced by ctrl+c>ctrl+v timings in BIOS, what about the wattage? How can it be lowered?

Hello

I have rx480. And I followed this tutorial.: https://www.youtube.com/watch?v=Mwb67g4skGM

Then I lower the voltage with watman

And I have 31+ mh / s

I hope to help you.

[matmator]

I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x

Any help is appreciated.

The stock card/bios should give you 24-25Mh/s. You can modify/optimize your card's bios to reach 30-31Mh/s and also lower the wattage.

The hashrate can be enhanced by ctrl+c>ctrl+v timings in BIOS, what about the wattage? How can it be lowered?

You can play with the memory timings and overclock the memory frequency (and undervolt it). For lower wattage you can lower the clock and voltage of your GPU. The exact settings/modifications are different for each type of cards.

These modifications can give you better hashrate for ETH-only mining. It is unstable for ETH+DCR/SIA/LBRY dual mining and don't forget that you won't get higher hashrate with the same settings if you're mining with Equihash or other algos. These guidelines are good for Ethash.

Ah!

I am glad to read this.

This explains why I have BSOD or gpu crash.

When I mine the zcash with my settings for ETH. Undecided Undecided Undecided

[MinerosYV]

Hello there new to the forum, new to mining, been learning a lot, great miner Mr. Claymore but I do have a problem, every thing is working fine but for some reason the rig resets every so often, some times every 15 minutes some times it will run no problem for 12 hours, the issue is always related to the dev fees, it show this in the screen:

ETH: Stratum - Cannot connect to US1.ethermine.org:4444
DevFee: ETH: Startum - Failed to connect, retry in 20 sec...

Then I get the GPU temps, then I get

Miner thread hangs, need to restart miner

It is very annoying, any posible solutions to this

Running 6 R9 390 on an Asrock H81 dual 1300 PSU 12 of memory, Celeron cpu, Ubuntu 14.

Any help would be greatly appreciated

Did read the readme file

Thanks

[almirfiorio]

Dear Friends

How im can configure claymore´s for multi-gpu?

with one gpu work well

but im put a second vga card and the calymore´s close

and what ius the best coin to miner with ethereum ?

thanks
Almir

[manotroll]

eth+xmr suport ?