NotFuzzyWarm
Legendary
Online
Activity: 3626
Merit: 2520
Evil beware: We have waffles!
|
|
January 29, 2017, 12:37:34 AM |
|
I use Cryptoglance only for an at-a-glance view of how my miners are running at the pools. AFAIK it has not been updated in a while to support any vital miner control functions on the s9's on up...
|
|
|
|
|
|
The forum strives to allow free discussion of any ideas. All policies are built around this principle. This doesn't mean you can post garbage, though: posts should actually contain ideas, and these ideas should be argued reasonably.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
HagssFIN
Legendary
Offline
Activity: 2436
Merit: 1706
Electrical engineer. Mining since 2014.
|
|
January 29, 2017, 12:51:09 AM |
|
I had a board repaired at the bitmainwarranty, but it still isn't working correctly. It occassionally keeps dropping to zero hash rate and asic status shows a full row of x's. Reboot fixes it again for a variable amount of time.
I've tried different communication port on the controller and the problematic board only moves to a different chain and the controller in functioning normally.
I'm keeping in touch with bitmainwarranty to find out a good solution, but as a back-up plan I was wondering if someone here would be familiar with a script for restarting the cgminer/bmminer in case of some of the boards dropping to a zero hash rate?
This is a 11.85Th/s 550M pre-autotune model.
|
|
|
|
NotFuzzyWarm
Legendary
Online
Activity: 3626
Merit: 2520
Evil beware: We have waffles!
|
|
January 29, 2017, 01:37:36 AM |
|
I had a board repaired at the bitmainwarranty, but it still isn't working correctly. It occassionally keeps dropping to zero hash rate and asic status shows a full row of x's. Reboot fixes it again for a variable amount of time.
I've tried different communication port on the controller and the problematic board only moves to a different chain and the controller in functioning normally.
I'm keeping in touch with bitmainwarranty to find out a good solution, but as a back-up plan I was wondering if someone here would be familiar with a script for restarting the cgminer/bmminer in case of some of the boards dropping to a zero hash rate?
This is a 11.85Th/s 550M pre-autotune model.
Use Awesome miner and create a rule for the miner to restart or reboot whenever its rate drops below your trip point. Works well, Awesome for me, especially with my under-volted s7's. When one gets cranky and drops a card I have the rule set to start CGminer again and the card comes back up. So far with s9's that works as well which is great considering the s9's -- especially the auto-tune ones -- don't like reboots...
|
|
|
|
xppb00
Newbie
Offline
Activity: 41
Merit: 0
|
|
January 29, 2017, 07:35:19 AM |
|
Hi,
I just realize that S9s are sold out. Any idea where to buy? or when is the next batch? I am going to buy 2 S9...
Thanks,
|
|
|
|
alh
Legendary
Offline
Activity: 1843
Merit: 1050
|
|
January 29, 2017, 10:06:06 AM |
|
Hi,
I just realize that S9s are sold out. Any idea where to buy? or when is the next batch? I am going to buy 2 S9...
Thanks,
Bitmain is observing the Chinese New Year. Check again next week (roughly February 5th). You might be able to find a previously owned one for sale on the "For Sale" sub-forum: https://bitcointalk.org/index.php?board=75.0
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2436
Merit: 1706
Electrical engineer. Mining since 2014.
|
|
January 29, 2017, 02:36:52 PM Last edit: January 29, 2017, 09:40:56 PM by HagssFIN |
|
I had a board repaired at the bitmainwarranty, but it still isn't working correctly. It occassionally keeps dropping to zero hash rate and asic status shows a full row of x's. Reboot fixes it again for a variable amount of time.
I've tried different communication port on the controller and the problematic board only moves to a different chain and the controller in functioning normally.
I'm keeping in touch with bitmainwarranty to find out a good solution, but as a back-up plan I was wondering if someone here would be familiar with a script for restarting the cgminer/bmminer in case of some of the boards dropping to a zero hash rate?
This is a 11.85Th/s 550M pre-autotune model.
Use Awesome miner and create a rule for the miner to restart or reboot whenever its rate drops below your trip point. Works well, Awesome for me, especially with my under-volted s7's. When one gets cranky and drops a card I have the rule set to start CGminer again and the card comes back up. So far with s9's that works as well which is great considering the s9's -- especially the auto-tune ones -- don't like reboots... Thanks, I'll consider this. I was wondering though if it could be some how wrote directly to the cgminer conf for example. (via ssh) edit:I tried now to swap one board with my another S9 and see if I get any new results, lets see... edit2:yep, same results as before, so it is indeed still a faulty hash board and other components are ok.
|
|
|
|
GWhisper
|
|
January 29, 2017, 11:33:21 PM |
|
Hi,
I just realize that S9s are sold out. Any idea where to buy? or when is the next batch? I am going to buy 2 S9...
Thanks,
You didn't need to wait long - another 2 batches have been released with a ship date of 1st of March.
|
|
|
|
xppb00
Newbie
Offline
Activity: 41
Merit: 0
|
|
January 31, 2017, 03:32:33 PM |
|
Hi,
I just realize that S9s are sold out. Any idea where to buy? or when is the next batch? I am going to buy 2 S9...
Thanks,
You didn't need to wait long - another 2 batches have been released with a ship date of 1st of March. Thanks for the update....
|
|
|
|
kurbeks
|
|
January 31, 2017, 05:24:20 PM |
|
Diff increse will continue in 10-15% mark i guess.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
January 31, 2017, 06:29:12 PM Last edit: February 01, 2017, 04:59:21 AM by philipma1957 |
|
This has been corrected and the number is now 967 on both websites. So if you order that march 1 unit be sure to check and see that the numbers match on hashnest and bitmain as they should . Also if you purchased the s9 at the 917 rate ask for a refund of around 60 usd. I really would like to see and read if you got stuck and if they fix it. as a heads up coinbase is quoting btc at 960 usd
bitmain is quoting btc at 917
thus you lose about 65 dollars if you use coinbase.
Hashnest has coins at 956
since hashnest and bitmain share the same website and are under the same umbrella it is really fucking bad that they do not match Take a look
|
|
|
|
VentMine
|
|
February 01, 2017, 06:24:41 AM |
|
This is the second order in a row where they are giving a future shipping date. I know Chinese New Year is part of it but... Do you think this will become standard? I mean, why not take our money ahead of time? The miner will devalue in the month wait and they can mine with it
|
1ESSdoVYKm8sNtYMfdkFBajhAe2e6G8keH
|
|
|
Micky25
Legendary
Offline
Activity: 974
Merit: 1000
|
|
February 01, 2017, 08:40:23 AM |
|
I think this is rather about the amount to produce, gauging interest.
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2436
Merit: 1706
Electrical engineer. Mining since 2014.
|
|
February 01, 2017, 10:30:51 AM |
|
I'm pretty pleased with the service of Bitmain Warranty in Denver, CO. Even though the board they repaired for me didn't work properly after all (it keeps dropping to zero hash rate and shows a row of x's), they handled fixing the situation very well. They will send me a working hash board in exchange after I have sent (I just actually came back from the post office) the faulty board back for them. I can definitely recommend them for fixing your miner. And thank you Phil and the others who have shared previous experience with them.
|
|
|
|
SaBit
Member
Offline
Activity: 85
Merit: 10
|
|
February 01, 2017, 05:34:25 PM |
|
I'm pretty pleased with the service of Bitmain Warranty in Denver, CO. Even though the board they repaired for me didn't work properly after all (it keeps dropping to zero hash rate and shows a row of x's), they handled fixing the situation very well. They will send me a working hash board in exchange after I have sent (I just actually came back from the post office) the faulty board back for them. I can definitely recommend them for fixing your miner. And thank you Phil and the others who have shared previous experience with them. They seem very slow to me, they have my S9 board since 18th Jan and still waiting for a quote
|
|
|
|
VentMine
|
|
February 01, 2017, 07:23:50 PM |
|
I think this is rather about the amount to produce, gauging interest.
I don't know, they don't need to gauge interest these days because they sell out every batch.
|
1ESSdoVYKm8sNtYMfdkFBajhAe2e6G8keH
|
|
|
bitsink
Member
Offline
Activity: 81
Merit: 10
|
|
February 01, 2017, 07:38:56 PM |
|
I think this is rather about the amount to produce, gauging interest.
I don't know, they don't need to gauge interest these days because they sell out every batch. I am amazed at how many people still venture into mining when at best it is marginal. Really there are only very few scenarios when this makes sense for home miners. Maybe I am missing something here?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
February 01, 2017, 07:57:26 PM |
|
I think this is rather about the amount to produce, gauging interest.
I don't know, they don't need to gauge interest these days because they sell out every batch. I am amazed at how many people still venture into mining when at best it is marginal. Really there are only very few scenarios when this makes sense for home miners. Maybe I am missing something here? yes you are missing people with cheap power not lots but 5 k watts to 15 kwatts which is say 4 to 11 s9s or 50th to 140th 50 th at 3 cent power = 700 usd a month after costs 140th at 3 cent power = 2100 usd a month 4 s9s = 5,600 11 s9s = 15,400 what legal business generates that income for that investment. Many people can access smaller power amounts. My house uses gas heat for every 5 dollars spent on power to mine I save 1 dollar in gas heat.... so from Oct 1 to April 1 I get a 20% break on power. WHAT KILLS the small guy with a good power deal is gear that breaks.
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
February 01, 2017, 08:17:38 PM |
|
I think this is rather about the amount to produce, gauging interest.
I don't know, they don't need to gauge interest these days because they sell out every batch. I am amazed at how many people still venture into mining when at best it is marginal. Really there are only very few scenarios when this makes sense for home miners. Maybe I am missing something here? yes you are missing people with cheap power not lots but 5 k watts to 15 kwatts which is say 4 to 11 s9s or 50th to 140th 50 th at 3 cent power = 700 usd a month after costs 140th at 3 cent power = 2100 usd a month 4 s9s = 5,600 11 s9s = 15,400 what legal business generates that income for that investment. Many people can access smaller power amounts. My house uses gas heat for every 5 dollars spent on power to mine I save 1 dollar in gas heat.... so from Oct 1 to April 1 I get a 20% break on power. WHAT KILLS the small guy with a good power deal is gear that breaks. You are also missing those of us have their miners hosted by others in areas of the country that have low power costs. I used to mine out of my house, then office, then locally offsite, now in another state. Some of us are crazier than others. But all in all it's been both fun and profitable to be part of the revolution. Which still continues to surprise.
|
|
|
|
edonkey
Legendary
Offline
Activity: 1150
Merit: 1004
|
|
February 02, 2017, 04:16:18 AM |
|
Looks like another couple of S9 batches are available. One is already sold out. Better buy up this last batch fast. Last chance to do your part to drive the next difficulty over 13%
|
Was I helpful? BTC: 3G1Ubof5u8K9iJkM8We2f3amYZgGVdvpHr
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
February 02, 2017, 04:26:19 AM |
|
Looks like another couple of S9 batches are available. One is already sold out. Better buy up this last batch fast. Last chance to do your part to drive the next difficulty over 13% Well as Phil stated ask for a refund because I've been following this site for quite some time. You are indeed throwing money away. Good luck. http://www.bitcoinforecast.com Keep an eye on this site for a week and let me know what ya all think;) I have some more charts I'll share tomorrow Worth a look! BR
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
|