A4 Dominator - Pre-Order Group Buy - 280mh, roughly 1000w, $1800 + shipping

[Eyedol-X]

Hey guys,

Thanks for your feedback! Don't worry, A4 customers will always be protected against any issues. We will provide constant and continuous support on our A4 official miners even after 3 month mining period. We will release a new version firmware within 24 hours and make sure all miners work even better with good profit.  Right now, A4 remains the best in the business unchallenged. Any other product claiming to be better than 14nm A4 can not be seen anywhere. Get A4 today and start mining for profit!

BTW, right now A4 price remains the same as announced and shipment will still be based on 3 miner per order shipment preference. 

Thanks very much. Any questions, pls email me at zhangq@innosilicon.com.cn and luojm@innosilicon.com.cn,

cheers

Chloe
Innosilicon marketing

So it's been 24 hours and a full day in China, update?

Ending of Day 3 in China right now and still no update from Innosilicon.

So much for "Within 24 hours"

[Master12210]

Any new updates on the software issue?? Getting tired of blades dropping out   

[usao]

At least their website is back online...

[FryguyUK]

Whats happening: Chloe says 24 hours and everyone starts a stop watch...

Realistic scenario: Tech guys told Chloe 24 hours and actually needed more time, Chloe just trying to be quick to relay to customers.

Usual outcome: They take their time and make things right and when released all complaints dissipate and there was again no point in getting ansy pantsy!

[valkir]

I'm pondering purchasing the MOQ 5 in the next week--I only have power and space for two unit, however.  I plan on selling the reminder on eBay, but if someone here would like to escrow for a unit, I would be happy to discuss that.

Still looking for some buyer ? I may be interested.

[Eyedol-X]

Whats happening: Chloe says 24 hours and everyone starts a stop watch...

Realistic scenario: Tech guys told Chloe 24 hours and actually needed more time, Chloe just trying to be quick to relay to customers.

Usual outcome: They take their time and make things right and when released all complaints dissipate and there was again no point in getting ansy pantsy!

I totally agree here, but it takes 5 minutes to post an update "Sorry all, we ran into an issue and don't have the update ready yet. I will update you when I have more information"

[Master12210]

Whats happening: Chloe says 24 hours and everyone starts a stop watch...

Realistic scenario: Tech guys told Chloe 24 hours and actually needed more time, Chloe just trying to be quick to relay to customers.

Usual outcome: They take their time and make things right and when released all complaints dissipate and there was again no point in getting ansy pantsy!

Yes it does take time to fix bugs but the issue that bothers me the most is we waited an extra couple of months for the units to be tested for problems and somehow missed this one 

[usao]

Heck, they didn't even have the first full blade until Mid Oct in their lab...

[Master12210]

Heck, they didn't even have the first full blade until Mid Oct in their lab...

You are right, I Over exaggerated a little but come on how many of you plugged the miner in and noticed the blades started to drop with in 4 hours of it mining?

[usao]

I have to power cycle each of mine at least twice a day.

[Master12210]

I have to power cycle each of mine at least twice a day.

What version are you using and what mv are you set at, and what MHz?

[usao]

I have to power cycle each of mine at least twice a day.

What version are you using and what mv are you set at, and what MHz?

V1.0.2
815
1200

[TracerX]

I'm pondering purchasing the MOQ 5 in the next week--I only have power and space for two unit, however.  I plan on selling the reminder on eBay, but if someone here would like to escrow for a unit, I would be happy to discuss that.

Still looking for some buyer ? I may be interested.

Yes, as soon as the firmware issue gets sorted out, I'll be purchasing.  I'll shout out again once we get there.

Thanks for asking, I appreciate it.

TrX

[QuintLeo]

Still wondering if anyone has tried A4s on LiteGuardian.

[firehawk71]

I have to power cycle each of mine at least twice a day.

What version are you using and what mv are you set at, and what MHz?

V1.0.2
815
1200

815mv is to high. That is why you keep crashing. I have found anything over 810mv is to high at least for me it causes problems. I like anywhere from 800-810 depending on pool.

Try this just for grins and see how your miner does. Go to
www.f2pool.com
Set up with 807mv 1200Mhz and see what kind of results you get. Use stock image.

UPDATE ON THIS POOL:: I just had a card crash!! Same problem after a somewhat stable run of about 20 hours I just lost a card even set at lower voltage!!! So never mind!!... 

[Inno_ASIC]

Hey guys,

Thanks for your feedback! Don't worry, A4 customers will always be protected against any issues. We will provide constant and continuous support on our A4 official miners even after 3 month mining period. We will release a new version firmware within 24 hours and make sure all miners work even better with good profit.  Right now, A4 remains the best in the business unchallenged. Any other product claiming to be better than 14nm A4 can not be seen anywhere. Get A4 today and start mining for profit!

BTW, right now A4 price remains the same as announced and shipment will still be based on 3 miner per order shipment preference. 

Thanks very much. Any questions, pls email me at zhangq@innosilicon.com.cn and luojm@innosilicon.com.cn,

cheers

Chloe
Innosilicon marketing

turns out the updated firmware is for batch one... Engineers are still working on the firmware for the second batch. Sorry about the confusion.

[bclcjunkie]

Inno,

is there a download link? when do you plan to open source it? also it was reported that even updated firmware for batch 1 didn't help. anyone who tried please confirm as i didn't get hold of the firmware.

Hey guys,

Thanks for your feedback! Don't worry, A4 customers will always be protected against any issues. We will provide constant and continuous support on our A4 official miners even after 3 month mining period. We will release a new version firmware within 24 hours and make sure all miners work even better with good profit.  Right now, A4 remains the best in the business unchallenged. Any other product claiming to be better than 14nm A4 can not be seen anywhere. Get A4 today and start mining for profit!

BTW, right now A4 price remains the same as announced and shipment will still be based on 3 miner per order shipment preference. 

Thanks very much. Any questions, pls email me at zhangq@innosilicon.com.cn and luojm@innosilicon.com.cn,

cheers

Chloe
Innosilicon marketing

turns out the updated firmware is for batch one... Engineers are still working on the firmware for the second batch. Sorry about the confusion.

[Master12210]

Just emailed innosilicon about safe temps and they are saying anything under 65c is safe so if anyone was wondering.. Hoping fw up date comes out soon

[firehawk71]

Anyone get the new firmware v0.0.2 to work for Batch 1? I am getting
 Error getting device list: ERR: socket connect(0) failed 

[Master12210]

Anyone get the new firmware v0.0.2 to work for Batch 1? I am getting
 Error getting device list: ERR: socket connect(0) failed 

I have not checked what rev I have but I can get it to run for 30 minutes before the software resets and about 2-4 hours before a blade completely disappears