[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[viperman2]

try    -ethi 4  or -ethi 3  or -ethi 5

it you don't put in -ethi  at all


 it sets it to -ethi 8  which may be too intense for the one card

you can go as low as -ethi 1 and as high as -ethi 16

 I am at -ethi 12 see my command line

-wd 1 -r 1 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 3 -epsw x -allpools 1 -mport -3333  -allpools 1 -dbg -1  -ethi 12

Also try -etha 2, to force rig to use amd-gpu-pro drivers instead of generic drivers.

-etha   Ethereum algorithm mode for AMD cards. 0 - optimized for fast cards, 1 - optimized for slow cards, 2 - for gpu-pro Linux drivers. -1 - autodetect (default, automatically selects between 0 and 1).

Thanks for your output, i added "-etha 2 -ethi 5" to the config row and will check how it will perform this night.

[1715137986]

1715137986

[ailikun]

Can you check if this image will work with your motherboard ?
https://simplemining.net/download/simpleminer-RX-v1085-4.11.rc3.imgc

Will this work, with r9 390?
or only with rx models?

For 380 you should use other image, see here:
https://simplemining.net/

It might work but propably you will have problems.
Try it and see for your self.

Yeah... but with that image i have lan problems...
Ok, ill try to use the rx version.

[philipma1957]

try    -ethi 4  or -ethi 3  or -ethi 5

it you don't put in -ethi  at all


 it sets it to -ethi 8  which may be too intense for the one card

you can go as low as -ethi 1 and as high as -ethi 16

 I am at -ethi 12 see my command line

-wd 1 -r 1 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 3 -epsw x -allpools 1 -mport -3333  -allpools 1 -dbg -1  -ethi 12

Also try -etha 2, to force rig to use amd-gpu-pro drivers instead of generic drivers.

-etha   Ethereum algorithm mode for AMD cards. 0 - optimized for fast cards, 1 - optimized for slow cards, 2 - for gpu-pro Linux drivers. -1 - autodetect (default, automatically selects between 0 and 1).

Thanks for your output, i added "-etha 2 -ethi 5" to the config row and will check how it will perform this night.

Please post results.

Also how did you clock the gpus?
Lastly do you use stock bios or flash a bios?

[thedue]

Any recommandation on settings for eth + decr settings for RX470 / SM ? (low power!)

[naeme18720]

Please give me link download win 10 64bit in flash 8gb or 16 gb

Are you know??

[thedue]

Please give me link download win 10 64bit in flash 8gb or 16 gb

Are you know??

 

[Maxumark]

Please give me link download win 10 64bit in flash 8gb or 16 gb

Are you know??

Its not available or needed in a Windows version. You don't need to know Linux to run it.
Just follow the instructions to download, image a drive, change email address on drive, save, eject, install in rig, boot, and manage from your computer with the email link.
    

[naeme18720]

Please give me link download win 10 64bit in flash 8gb or 16 gb

Are you know??

Its not available or needed in a Windows version. You don't need to know Linux to run it.
Just follow the instructions to download, image a drive, change email address on drive, save, eject, install in rig, boot, and manage from your computer with the email link.
    

ok but OC not good
for 3 the reason
1.We can not turn on the computer If the power goes off
2. in OC About 2 m/h less that gpu for example rx 470 in win 7 or 10 27.400 but in OC 26.100
3.in win 7 or 10 -110mv but in oc not can be Low power graphics just put 1 power that 1-7

I found  installing win 10 64bit in flash 8gb

This link

https://www.tenforums.com/tutorials/2376-create-bootable-usb-flash-drive-install-windows-10-a.html

[pbuva]

Hi,

Sapphire Nitro+ RX 480 8GB, stock rom : ETH + PASC : 1024/2240/1
26,5 + 197  ( -dcri 15)
I have a relatively cheap electricity, 0,04 USD, but no air conditioning (heat is the enemy)

have you found a better settings?

[marcos5872]

Hi,

Sapphire Nitro+ RX 480 8GB, stock rom : ETH + PASC : 1024/2240/1

have you found a better settings?

Hello, what's hashrate do you get?

[pbuva]

Hi,

Sapphire Nitro+ RX 480 8GB, stock rom : ETH + PASC : 1024/2240/1

have you found a better settings?

Hello, what's hashrate do you get?

26,5 + 197  ( -dcri 15)

[tytanick]

UPDATE: Anyone ready for AMD new driver BETA TEST ?

possible ~3% mining speed increase

NOTE: !!! :
As it is beta test, keep in mind that you need to be near your rig, make upgrade and pray thet it will succeed.
There is always a change with bigger updates that something will go wrong and rig wont boot or wont start mining.
Upgrade only one rig at a time to see if its working !
In that case you would need to reflash your drive with old stable version.
Also in my case i had 4.11 beta kernel, please tell me if with other it will also work (it propably will)
All my rigs upgraded without any problem
Also ignore warnings "Possible missing firmware"

Please write down old hash speed and wattage and after upgrade, new speeds and wattage to make a compare
Post your results here.

[philipma1957]

Hi,

Sapphire Nitro+ RX 480 8GB, stock rom : ETH + PASC : 1024/2240/1
26,5 + 197  ( -dcri 15)
I have a relatively cheap electricity, 0,04 USD, but no air conditioning (heat is the enemy)

have you found a better settings?

yeah stop dual mining  heat will drop.  as dual mining pulls more power


@ ty  kernel up grade



driver up grade


done

[citronick]

Phillip or whoever have done the kernel upgrade..... pls post results.

I am not in my warehouse now and I have to avoid any itchy fingers ...  

NOTE -- those who are using SRR, you may want to disable them temporarily so that SRR don't accidently reboot your rig after 250 seconds because of no hashing or online activity. Looks like this kernel upgrade will take more than 10 mins.

[philipma1957]

it works  and I am slower  51.7  for 2 cards vs 52.2 for two cards

worse yet I now get pulse  I drop to 41 then go to 51.7

my settings are below just the top rig was changed


I will have to find new clocks to get rid of pulse action

pulse to 41 or 42 has stopped I will keep an eye out.

if you do the change you may get different results as I am oem bios  and use 0 power stage setting

[TheYankeesWin!]

Phil could you  boost the core and fans a bit to see if the new drivers like a higher core then 999?

[philipma1957]

Phil could you  boost the core and fans a bit to see if the new drivers like a higher core then 999?

Okay  I will change  the top one  which has the up grades

I will change the next two  which don't have the upgrades

You were right the higher core of 1020  does do better with new amd drivers

It is warming up today in NJ so I have to do higher fans.

[tytanick]

Phil could you  boost the core and fans a bit to see if the new drivers like a higher core then 999?

Okay  I will change  the top one  which has the up grades

I will change the next two  which don't have the upgrades

You were right the higher core of 1020  does do better with new amd drivers

If you want more MH then increase core to 1150.
Its limiting you right now

[philipma1957]

Phil could you  boost the core and fans a bit to see if the new drivers like a higher core then 999?

Okay  I will change  the top one  which has the up grades

I will change the next two  which don't have the upgrades

You were right the higher core of 1020  does do better with new amd drivers

If you want more MH then increase core to 1150.
Its limiting you right now

I like the 0 power stage setting  so I boosted to 1050 and the newer driver is better

I will get back with 1075 then 1100 then 1125 then 1150

[citronick]

Phil - if you have rigs that show the "300/300" thing..... if you upgrade to this kernel - will it go away? Thanks