Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[naeme18720]

Hi to all

why my share found very very hight  327ms-1200ms--120ms--its Different why???

My memoory rom 4GB---and--cpu g3240 3.1Ghz..motherboard b85 asus

im tested all connection in pool drawfpool...but not fixed...what are you doing ...this see picture

in realy this problem in flypool i have......my problem where???

Кo peчe, кo?

Бa и aз нe гo вдяaaм кo викa

thanks my friend...low low fixed this problem

[1714477374]

1714477374

[1714477374]

1714477374

[1714477374]

1714477374

[1714477374]

1714477374

[1714477374]

1714477374

[ghostfaceuk]

please help me...my share found 300 ms ..whay??? how i fixed this share found???

are you using the pool closest to your location?  using a pool in a different location can increase the time it takes for a share to be accepted

ok ..I lived in iran...what server for me is beter in drawfpool???

they have 4 servers for ZEC. one in europe zec-eu1 (france), one in china zec-cn1 (shanghai), one in russia zec-ru1 (moscow)and one in the us zec-us1 (seattle).

Choose the server closest to you and you should see the 300ms time drop

[naeme18720]

please help me...my share found 300 ms ..whay??? how i fixed this share found???

are you using the pool closest to your location?  using a pool in a different location can increase the time it takes for a share to be accepted

ok ..I lived in iran...what server for me is beter in drawfpool???

they have 4 servers for ZEC. one in europe zec-eu1 (france), one in china zec-cn1 (shanghai), one in russia zec-ru1 (moscow)and one in the us zec-us1 (seattle).

Choose the server closest to you and you should see the 300ms time drop

this best server for me is russia zec-ru1 ...359-220 ms ...this mean for me that lived in iran the best or no..




But before this share found was 170 ms but now is 300ms...this problem that riser usb3 ..not ..i dont know

[kuna95]

in dwarfpool
if you have
cpu use port 3334
1 gpu use port 3335
2-4 gpu use port 3336
5+ gpu use port 3337

change config .bat
 i have serveur eu 48-180 ms reguly 78ms

[naeme18720]

in dwarfpool
if you have
cpu use port 3334
1 gpu use port 3335
2-4 gpu use port 3336
5+ gpu use port 3337

change config .bat
 i have serveur eu 72-180 ms

I change server that 3333 to 3336 for 4 gpu but not change share found 358--257-390-400 ms

This miner is for me

https://dwarfpool.com/zec/address?wallet=t1YdKS8sstWxxdNs8Vz5TMtEAogSfAaXg4s

In now i used that server zec-eu1.dwarfpool.com:3336 ..my share foun change to 240-280-230 ms...thanks my friend...this better that 300 -400 ms

[densets]

Hi to all

why my share found very very hight  327ms-1200ms--120ms--its Different why???

My memoory rom 4GB---and--cpu g3240 3.1Ghz..motherboard b85 asus

im tested all connection in pool drawfpool...but not fixed...what are you doing ...this see picture

in realy this problem in flypool i have......my problem where???

http://uupload.ir/files/0ek_5875untitled.jpg

My god, those poor fans.

my fans are at 100% does that make me a murderer?

[naeme18720]

Hi to all

why my share found very very hight  327ms-1200ms--120ms--its Different why???

My memoory rom 4GB---and--cpu g3240 3.1Ghz..motherboard b85 asus

im tested all connection in pool drawfpool...but not fixed...what are you doing ...this see picture

in realy this problem in flypool i have......my problem where???

My god, those poor fans.

my fans are at 100% does that make me a murderer?

my fans 50 - 70% but in claymore 80 -87% showed

[dygus]

One of my GPUs shows "returned incorrect data" it's shappire 290x 8gb RAM 2 others 290x with 4gbs are ok. Anyone knows why?

[Fidemoga]

One of my GPUs shows "returned incorrect data" it's shappire 290x 8gb RAM 2 others 290x with 4gbs are ok. Anyone knows why?

You need to reduce the frequency or reduce the intensity. The clock or the intensity is too high, so it returns bad data.

[dygus]

One of my GPUs shows "returned incorrect data" it's shappire 290x 8gb RAM 2 others 290x with 4gbs are ok. Anyone knows why?

You need to reduce the frequency or reduce the intensity. The clock or the intensity is too high, so it returns bad data.

Thank you for quick response

[shadabahmed]

here are the wattage usage i checked with energy meter
http://www.ebay.com/itm/New-TS-1500-Plug-in-Electricity-Meter-Electronic-Energy-Meter-LCD-Energy-Monitor-/121962476226

card is rx470 4g OC


5X RX470 ETC+DCR modded bios 1100/1900 powerlimit 25+  950 watt
5X RX470 ETC+DCR stock 1216/1750                                  805 watt
5X RX470 ZEC                                                                885 WATT
5X RX470 XMR                                                               760 WATT


is that possible lower the power consumption?

[BitJunkie556]

here are the wattage usage i checked with energy meter
http://www.ebay.com/itm/New-TS-1500-Plug-in-Electricity-Meter-Electronic-Energy-Meter-LCD-Energy-Monitor-/121962476226

card is rx470 4g OC


5X RX470 ETC+DCR modded bios 1100/1900 powerlimit 25+  950 watt
5X RX470 ETC+DCR stock 1216/1750                                  805 watt
5X RX470 ZEC                                                                885 WATT
5X RX470 XMR                                                               760 WATT


is that possible lower the power consumption?

What's your hashrate with those rigs?

I just feel like there's no way they can be burning that much power... Although I guess the last rig seems about right.

The only way to reduce power would really be to undervolt etc... Thing is, for those kind of clock speeds on the first rig, there's no way you'll be able to undervolt much, if at all... Either lower your clock speeds and undervolt, or just deal with it, it seems like.

Try lowering core to 1000-1050, and lower your power limit. You'll have to play with it to see what is able to run stable. Maybe even try lowering core to 1000, and crank up your memory clock a bit more. May make your hashrate better for similar (or less) wattage. Like I said, ultimately you'll just have to put some time into "guess and check" here.

[xeridea]

Hi to all

why my share found very very hight  327ms-1200ms--120ms--its Different why???

My memoory rom 4GB---and--cpu g3240 3.1Ghz..motherboard b85 asus

im tested all connection in pool drawfpool...but not fixed...what are you doing ...this see picture

in realy this problem in flypool i have......my problem where???

My god, those poor fans.

my fans are at 100% does that make me a murderer?

There isn't really much benefit to running cards below ~65-70.  So it is not worth spinning fans really high to get temps in 50s.  For Eth or Zec with undervolt, 30-50% fan should be fine. You may get slightly higher extreme clocks with lower temp, but not worth killing the fans.

[shadabahmed]

here are the wattage usage i checked with energy meter
http://www.ebay.com/itm/New-TS-1500-Plug-in-Electricity-Meter-Electronic-Energy-Meter-LCD-Energy-Monitor-/121962476226

card is rx470 4g OC


5X RX470 ETC+DCR modded bios 1100/1900 powerlimit 25+  950 watt
5X RX470 ETC+DCR stock 1216/1750                                  805 watt
5X RX470 ZEC                                                                885 WATT
5X RX470 XMR                                                               760 WATT


is that possible lower the power consumption?

What's your hashrate with those rigs?

I just feel like there's no way they can be burning that much power... Although I guess the last rig seems about right.

The only way to reduce power would really be to undervolt etc... Thing is, for those kind of clock speeds on the first rig, there's no way you'll be able to undervolt much, if at all... Either lower your clock speeds and undervolt, or just deal with it, it seems like.

Try lowering core to 1000-1050, and lower your power limit. You'll have to play with it to see what is able to run stable. Maybe even try lowering core to 1000, and crank up your memory clock a bit more. May make your hashrate better for similar (or less) wattage. Like I said, ultimately you'll just have to put some time into "guess and check" here.

bro how to undervolt? i mean which options i have to change

i am using this setting at stock bios card

core voltage = +0
power limit = +0
temp. limit = 90
core clock = 1216
memory clock = 1750
fan speed 65

[jelin1984]

Set the following environment variables, especially if you have 1-2GB cards:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


where i must put that
at start bat file???
or at some new bat file??

any example?

[shadabahmed]

Set the following environment variables, especially if you have 1-2GB cards:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


where i must put that
at start bat file???
or at some new bat file??

any example?

in start of bat file like


set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
NsGpuCNMiner -tt 76 -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u your XMR wallet -p x -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u your XMR wallet -p x

[ffthomas]

here are the wattage usage i checked with energy meter
http://www.ebay.com/itm/New-TS-1500-Plug-in-Electricity-Meter-Electronic-Energy-Meter-LCD-Energy-Monitor-/121962476226

card is rx470 4g OC


5X RX470 ETC+DCR modded bios 1100/1900 powerlimit 25+  950 watt
5X RX470 ETC+DCR stock 1216/1750                                  805 watt
5X RX470 ZEC                                                                885 WATT
5X RX470 XMR                                                               760 WATT


is that possible lower the power consumption?

What's your hashrate with those rigs?

I just feel like there's no way they can be burning that much power... Although I guess the last rig seems about right.

The only way to reduce power would really be to undervolt etc... Thing is, for those kind of clock speeds on the first rig, there's no way you'll be able to undervolt much, if at all... Either lower your clock speeds and undervolt, or just deal with it, it seems like.

Try lowering core to 1000-1050, and lower your power limit. You'll have to play with it to see what is able to run stable. Maybe even try lowering core to 1000, and crank up your memory clock a bit more. May make your hashrate better for similar (or less) wattage. Like I said, ultimately you'll just have to put some time into "guess and check" here.

bro how to undervolt? i mean which options i have to change

i am using this setting at stock bios card

core voltage = +0
power limit = +0
temp. limit = 90
core clock = 1216
memory clock = 1750
fan speed 65

You should use WattTool instead of AMD Radeon settings (WattMan) or another GPU tweak software.

Set the below mentioned parameters:

GPU P7 -> 1200 Mhz + 1000mV
Memory -> 1750 Mhz + 950mV
Voltage offset: try to set -5

For temperature and fan settings I recommend you to use the Zcash miner's options in config.txt (tt, ttli, tstop, fanmin, fanmax).

[riser]

New miner soon?

[Za1n]

Set the following environment variables, especially if you have 1-2GB cards:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


where i must put that
at start bat file???
or at some new bat file??

any example?

Yes. Put in in your batch file like below (for Windows):

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe <your parameters>

[jelin1984]

i must write

set
or setx??