Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[gennadiv]

paбoтa видeoкapт r9 380 гигaбит 4 гибaйтa пaмяти 512 бит нa вepcии 3.1 
ZEC - Total Speed: 116.507 H/s, Total Shares: 1280, Rejected: 2, Time: 03:31
ZEC: GPU0 39.154 H/s, GPU1 41.198 H/s, GPU2 36.154 H/s
ZEC: 11/10/16-20:04:00 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (109 ms)!
ZEC: 11/10/16-20:04:00 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (109 ms)!

[gregor12]

I got a problem here.
6 cards in a rig. R9 390. 1100/1500 +50 power lim.
Win 8.1
Driver 15.12
12 gb memory
H81 pro btc + g1840
The problem is miner hangs when 1 card goes to 0 speed. Can't even close the window with miner. Only reboot helps.

I have the same problem, GPU0 hangs, I cant close window only reboot helps. I got 290x 15.12 driver, stock settings.

[adaseb]

Nvidia people are catching on.




- GTX 960: 26 Sol/s
- GTX 970: 50 Sol/s
- GTX 980: 56 Sol/s
- GTX 1060 6G: 51 Sol/s
- GTX 1070: 66 Sol/s

[gennadiv]

пpoпишитe вoт тaк  -tt 65,65,65
-wd 1
-dbg 1
-i 2,2,2
-r >1

[gennadiv]

I got a problem here.
6 cards in a rig. R9 390. 1100/1500 +50 power lim.
Win 8.1
Driver 15.12
12 gb memory
H81 pro btc + g1840
The problem is miner hangs when 1 card goes to 0 speed. Can't even close the window with miner. Only reboot helps.

I have the same problem, GPU0 hangs, I cant close window only reboot helps. I got 290x 15.12 driver, stock settings.
[/quot-tt 65,65,65
-wd 1
-dbg 1
-i 2,2,2
-r >1
e]

[Masked_Immortal]

Nvidia people are catching on.




- GTX 960: 26 Sol/s
- GTX 970: 50 Sol/s
- GTX 980: 56 Sol/s
- GTX 1060 6G: 51 Sol/s
- GTX 1070: 66 Sol/s

on linux?

[DrX]

Nvidia people are catching on.




- GTX 960: 26 Sol/s
- GTX 970: 50 Sol/s
- GTX 980: 56 Sol/s
- GTX 1060 6G: 51 Sol/s
- GTX 1070: 66 Sol/s

Using what?

Changing 2.0 to 3.1 gave nice boost for my 290x & 290... 52Sols/s + 48 Sols = 100Sols/s -> 65 + 58 = 123 Sols/s
No change in 7950 and 280...Can't use -i because of weak CPU..

[adaseb]

If you guys are getting your 290/390 hanging and you can't close the window, don't use "-i 1" or "-i 2".

[LeonardoVega]

Nvidia people are catching on.




- GTX 960: 26 Sol/s
- GTX 970: 50 Sol/s
- GTX 980: 56 Sol/s
- GTX 1060 6G: 51 Sol/s
- GTX 1070: 66 Sol/s

What do you use miner?

[Mapuo]

пpoпишитe вoт тaк  -tt 65,65,65
-wd 1
-dbg 1
-i 2,2,2
-r >1

Бoклyк pycки, тyк ce пишe нa aнглийcки! Изпoлзвaй eбaния cи eзик в pycкитe фopyми!

[gennadiv]

пpoпишитe вoт тaк  -tt 65,65,65
-wd 1
-dbg 1
-i 2,2,2
-r >1

Бoклyк pycки, тyк ce пишe нa aнглийcки! Изпoлзвaй eбaния cи eзик в pycкитe фopyми!

list so -TT 65,65,65
-wd 1
-dbg 1
-I 2,2,2
-R >1

[ioglnx]

I am getting the same issue as everyone here. Every rig is fine except one 6 GPU rig with a few 290s.

It hangs and you cant close the program , need to reboot.


I think the issue is that with regular mining, the GPU used little bandwidth to communicate with the CPU so the cheap ribbon or usb risers were fine.

But now with huge 100-200MB/s bandwidth going thru the ribbons which probably have interference with the surroundings is causing problems.

I dont think 100Sol/s or higher will be possible with any risers. Nicehash is releasing a new Nvidia miner capable of 50-60Sol/s and they are having issues with the risers also.

ITs also the reason why some of us get "gpu get incorrect data" because its sent back to the CPU and the ribbon messes up the data and you get incorrect sahres.

Try running with -i 0

Nicehash is releasing a new Nvidia miner capable of 50-60Sol/s and they are having issues with the risers also. Sources for this?
Thats why i always say invest wise in hardware so i bought EVGA FTW-K X99 doing 5x PCIe 3.0 8x and Asus X99 WS-E/3.1 doing 16x/8x/8x/8x/8x/8x/8x and having proper PCIe Risers for 16x will do all fine.
Or the Asrock BTC Kit

[adaseb]

Unless you are using those x16 to x16 risers, you will get issues anyways.

Problem is you are transfering around ~500MB/s on the PCIe 2.0 x1 to the CPU and there are interference issues because the thin ribbon or the cheap USB 3.0 cable can't handle the bandwidth properly.

[sp_]

Nicehash is releasing a new Nvidia miner capable of 50-60Sol/s and they are having issues with the risers also. Sources for this?

I think the riser issue was resolved. The duplicate check was moved from the host code to the gpu to reduce the bandwidth.

More info on the new nvidia miner:

https://forum.z.cash/t/nvidia-gtx-970-50-sol-s/7848

[ioglnx]

Unless you are using those x16 to x16 risers, you will get issues anyways.

Problem is you are transfering around ~500MB/s on the PCIe 2.0 x1 to the CPU and there are interference issues because the thin ribbon or the cheap USB 3.0 cable can't handle the bandwidth properly.

Mine run at PCIe 3.0 x1 not 2.0 and I use the ASrock BTC Kit which uses 2 SATa 3.0 Cables..i have no issues even I use a old e4300 on a 630i Nforce mobo.

There is no Release yet with faster speed..and no release of the guy who posted the topic and from nicehash there is nothing new on github.

[Streetlight9]

If i had an i7 I could probably do 80 Sol/s

http://i63.tinypic.com/14tvqch.png

I still Dont understand if I am doing this right...(A video would help if poss)...


This the 1550mhz Strap?

https://postimg.org/image/gz75rqt1p/

NOOOOOOO!

Dont touch that field. See the guide i posted earlier

Right ok, show me the guide again please.

Thanks

[amfofo]

@adaseb

do you have for the sapphire r9-280x toxic   hynix?

[manoe]

I'm curious to the next beast version of claymore    

[frappucino]

Running v3.1 on a 280x, getting between 55-60H/s

I tried OCing using MSI Afterburner, but most settings just either:
a. do very little
b. decrease performance


any tips?

[Claymore]

In a couple of hours I'll release next update, up to 100H/s on stock 390/390X.