Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[Disallowedword]

No speedup on Fiji produo still 680sol/s 

However, 7990 now 500sol/s 

Any idea how much power the beast is pulling from the wall? Thanks!

[FluffyDiscord]

can anyone tell me default AMD Environment settings?
because some of my other opencl apps are broken (owner of rx 470)
I mean these:
GPU_FORCE_64BIT_PTR
GPU_MAX_HEAP_SIZE
GPU_USE_SYNC_OBJECTS
GPU_MAX_ALLOC_PERCENT
GPU_SINGLE_ALLOC_PERCENT

Look @ OP

dude
PLEASE read my question again, I am not asking for modified values, but for default values that were before modifying

[ccccccc7]

No speedup on Fiji produo still 680sol/s 

However, 7990 now 500sol/s 

Any idea how much power the beast is pulling from the wall? Thanks!

Sadly no, I don't have a watt meter or anything. 

[Maxikosw]

Tried diffrent drivers on my R9 Nano. No "asm" so no speed update... Funny that 290 and 7950 work just great

Iv also tried every combo you can thik of on the nano but still no speed increase....
Have you tried with 15.12 drivers yet? Would it make any difference from 16.6 drivers?

No. I just install newest drivers and mining for old speed. Maybe next miner version will fix Nano asm.

[m1n1ngP4d4w4n]

can anyone tell me default AMD Environment settings?
because some of my other opencl apps are broken (owner of rx 470)
I mean these:
GPU_FORCE_64BIT_PTR
GPU_MAX_HEAP_SIZE
GPU_USE_SYNC_OBJECTS
GPU_MAX_ALLOC_PERCENT
GPU_SINGLE_ALLOC_PERCENT

Look @ OP

dude
PLEASE read my question again, I am not asking for modified values, but for default values that were before modifying

right
Just reboot, it should be back to default
otherwise aside from putting GPU_FORCE_64BIT_PTR 0 to 1, you shouldn't have issues with gaming & stuff

[Disallowedword]

No speedup on Fiji produo still 680sol/s 

However, 7990 now 500sol/s 

Any idea how much power the beast is pulling from the wall? Thanks!

Sadly no, I don't have a watt meter or anything. 

Well I will try one card and see. pretty sure I am going to be buying some PSU's. Will post the info so all us illustrious 7990 owners can stay informed, lol. Thanks...x

[FluffyDiscord]

can anyone tell me default AMD Environment settings?
because some of my other opencl apps are broken (owner of rx 470)
I mean these:
GPU_FORCE_64BIT_PTR
GPU_MAX_HEAP_SIZE
GPU_USE_SYNC_OBJECTS
GPU_MAX_ALLOC_PERCENT
GPU_SINGLE_ALLOC_PERCENT

Look @ OP

dude
PLEASE read my question again, I am not asking for modified values, but for default values that were before modifying

right
Just reboot, it should be back to default
otherwise aside from putting GPU_FORCE_64BIT_PTR 0 to 1, you shouldn't have issues with gaming & stuff

so rebooting sets to default, thanks
some of my opencl apps were not working

[qqqq]

Claymore , when Nano fix will coming ? I got mixed rigs with Polaris and cannot just downgrade my drivers for Nano. Thanks. Right now the -asm 0 for them.

[Disallowedword]

can anyone tell me default AMD Environment settings?
because some of my other opencl apps are broken (owner of rx 470)
I mean these:
GPU_FORCE_64BIT_PTR
GPU_MAX_HEAP_SIZE
GPU_USE_SYNC_OBJECTS
GPU_MAX_ALLOC_PERCENT
GPU_SINGLE_ALLOC_PERCENT

Look @ OP

dude
PLEASE read my question again, I am not asking for modified values, but for default values that were before modifying

right
Just reboot, it should be back to default
otherwise aside from putting GPU_FORCE_64BIT_PTR 0 to 1, you shouldn't have issues with gaming & stuff

so rebooting sets to default, thanks
some of my opencl apps were not working

If that doesn't work, a reset will, but it will also wipe your drivers.

ETA: for Windows 10 64 bit...

GPU_FORCE_64BIT_PTR         0
GPU_MAX_ALLOC_PERCENT    100
GPU_MAX_HEAP_SIZE           100
GPU_SINGLE_ALLOC_PERCENT 100
GPU_USE_SYNC_OBJECTS      1

[fr4nkthetank]

or just go system - environment variables - and delete the setx entries you put in.  next time just put set

[omshree]

Tried diffrent drivers on my R9 Nano. No "asm" so no speed update... Funny that 290 and 7950 work just great

As mentioned above, use 16.3.2 with fijis.

[mettalmag]

sorry if this was already asked but
any changes on 480?

[Moondreams]

Claymore, We wait Linux v.11

me too...

Please do not make us linux users unhappy.

me too...

[vapourminer]

can anyone tell me default AMD Environment settings?
because some of my other opencl apps are broken (owner of rx 470)
I mean these:
GPU_FORCE_64BIT_PTR
GPU_MAX_HEAP_SIZE
GPU_USE_SYNC_OBJECTS
GPU_MAX_ALLOC_PERCENT
GPU_SINGLE_ALLOC_PERCENT

just clear them, then default values will be used by whatever uses them next.

setx GPU_FORCE_64BIT_PTR=   (you may not need the equals sign, try both ways)
etc

BTW use set for miner sessions, do not use setx, setx sets values perminately across all future cmd prompts and programs. set sets it just for that command prompt only, then clears them on exit.

in this case only you would use the setx to clear them system wide.

edit fr4ankthetank beat me to it.

[grizscom]

Claymore, We wait Linux v.11

me too...
Please do not make us linux users unhappy.

me too...

+100
I offer to chip in for the speed of the process.

[Nightworker88]

@vapourminer

ok, maybe its really better to set for miner sessions set instead of setx.

you can tell me how to delete if i allways used setx - restart rig?

Thanks for answer

[ccccccc7]

Tried diffrent drivers on my R9 Nano. No "asm" so no speed update... Funny that 290 and 7950 work just great

As mentioned above, use 16.3.2 with fijis.

Thank you!!! Produo now @ 760sol/s

[batut]

hi. how much sol with a r9 390?

[ccccccc7]

hi. how much sol with a r9 390?

310-330 sol/s

[stoon]

Did anyone compare the power consumption between V11.0 and other versions?
It's about 100W more for me.

You must be at max sol's for your mining instead of efficiency because here are my results.
https://bitcointalk.org/index.php?topic=1670733.msg17485394#msg17485394