Ursul0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 08:03:33 AM |
|
The optimal range of most PSU is 50-70 percent of the rated load.
simply not so. good quality psu usually performs at loads of 90% better than at 50%. go and see some graphs at www.jonnyguru.comfyi also psu output is the number on the box, not the consumption at the wall.
|
|
|
|
megamaster
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 08:55:27 AM |
|
The optimal range of most PSU is 50-70 percent of the rated load.
simply not so. good quality psu usually performs at loads of 90% better than at 50%. go and see some graphs at www.jonnyguru.comfyi also psu output is the number on the box, not the consumption at the wall. Not sure where you got that information, certainly not at jonnyguru. A PSU peak efficiency is at around 50% and it decreases as you get either lower or higher. No PSU will perform better at 90% than it does at 50%. The reason you can see a lot of tests at higher loads in jonnyguru is because that’s exactly where most PSUs have difficulty hitting their 80+ ratings. As for your last statement I’m not sure what you mean, but the number on the box is the effective power the PSU can supposedly deliver to your PC components. As no PSU has 100% efficiency, it will draw more than that from the wall to effectively deliver what it says on the box. How much more will depend on its efficiency PS: Just do a simple google image search for PSU efficiency curve
|
|
|
|
Ursul0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 10:57:57 AM Last edit: July 28, 2017, 11:33:27 AM by Ursul0 |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fs12.postimg.org%2Fcxhj6qdn1%2Fevga-g3-1000.png&t=665&c=RKnFuXWWxN4-2g) This is a typical picture. You are correct about the efficiency. Its often best at ~90% (for many reasons) However talking about actually using 50% of your PSU's nominal capacity sounds like a completely absurd thing to do. also to your second point, that's exactly what I meant. Just was typing from mobile via VNC, so it was kinda hard:) (1KW DC pulls 1.1KW AC with efficiency of 0.9)
|
|
|
|
megamaster
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 12:34:16 PM |
|
https://s12.postimg.org/cxhj6qdn1/evga-g3-1000.pngThis is a typical picture. You are correct about the efficiency. Its often best at ~90% (for many reasons) However talking about actually using 50% of your PSU's nominal capacity sounds like a completely absurd thing to do. also to your second point, that's exactly what I meant. Just was typing from mobile via VNC, so it was kinda hard:) (1KW DC pulls 1.1KW AC with efficiency of 0.9) Yes, you’re correct. I was not suggesting that you should buy a PSU to run it at 50%. However I would advice not to buy a PSU that you’ll run at 90% or more, not only efficiency starts to drop more significantly, but you also have to take into account degradation with aging
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 12:37:02 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fs12.postimg.org%2Fcxhj6qdn1%2Fevga-g3-1000.png&t=665&c=RKnFuXWWxN4-2g) This is a typical picture. You are correct about the efficiency. Its often best at ~90% (for many reasons) However talking about actually using 50% of your PSU's nominal capacity sounds like a completely absurd thing to do. also to your second point, that's exactly what I meant. Just was typing from mobile via VNC, so it was kinda hard:) (1KW DC pulls 1.1KW AC with efficiency of 0.9) EVGA MAKES GOOD EQUIPMENT-- And they stand by their warranties. There are other known, popular brands with "80+" labels that will simply die if placed at full load. A PSU will last longer if used at 50-70% of full load. The capacitors degrade more rapidly at full load. After having several failures, I always purchase a PSU with a higher rating than my expected load. --scryptr
|
|
|
|
fredeq
Legendary
Offline
Activity: 1537
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 01:13:07 PM |
|
|
|
|
|
Jukagid
Newbie
Offline
Activity: 64
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 03:16:41 PM |
|
The optimal range of most PSU is 50-70 percent of the rated load.
simply not so. good quality psu usually performs at loads of 90% better than at 50%. go and see some graphs at www.jonnyguru.comfyi also psu output is the number on the box, not the consumption at the wall. Not sure where you got that information, certainly not at jonnyguru. A PSU peak efficiency is at around 50% and it decreases as you get either lower or higher. No PSU will perform better at 90% than it does at 50%. The reason you can see a lot of tests at higher loads in jonnyguru is because that’s exactly where most PSUs have difficulty hitting their 80+ ratings. As for your last statement I’m not sure what you mean, but the number on the box is the effective power the PSU can supposedly deliver to your PC components. As no PSU has 100% efficiency, it will draw more than that from the wall to effectively deliver what it says on the box. How much more will depend on its efficiency PS: Just do a simple google image search for PSU efficiency curve I agree with that. Highest efficiency is around 50% of the load.
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2017, 09:08:30 PM |
|
anyway till now i only had 1 dead psu with mining, the cx430
over wise i have all corsair series and 2 zalman they all load at 90% or some more
|
|
|
|
sk8erskid420
Jr. Member
Offline
Activity: 46
Merit: 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 29, 2017, 02:43:34 PM |
|
actually you are incorrect in the matters of that we don't pay for it, which we do pay for in the form of a dev fee. that said not much advancement can be made with amd and equihash, my question is why has he not reduced the dev fee considering amd gpus for the moment have hit there max, better yet why hasn't he removed the dev fee atleast with the zcash miner since he cannot make anymore optimizations in the code. which quite franky makes sense to do
you can turn off the dev fee
|
|
|
|
Ursul0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 30, 2017, 11:24:36 AM |
|
EVGA MAKES GOOD EQUIPMENT--
And they stand by their warranties. There are other known, popular brands with "80+" labels that will simply die if placed at full load. A PSU will last longer if used at 50-70% of full load. The capacitors degrade more rapidly at full load.
After having several failures, I always purchase a PSU with a higher rating than my expected load. --scryptr
I see your points...yet not sure if I follow your logic. There're lots of makers doing good quality PSUs, so buying one should not be that difficult. And investing in a top tier PSU will most likely save you money in long term. Few days of cards being idle may cover the price difference and trying to keep poor quality PSU in pristine conditions by paying premium for larger output and then running it at 50-70% doesn't make sense either. So I'd say the optimal PSU should be a quality one (good models from EVGA, Seasonic, Corsair, etc) and run at up to 90%(from the wall) of it's nominal capacity, which makes it about 80% actual load...
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 30, 2017, 12:12:00 PM |
|
EVGA MAKES GOOD EQUIPMENT--
And they stand by their warranties. There are other known, popular brands with "80+" labels that will simply die if placed at full load. A PSU will last longer if used at 50-70% of full load. The capacitors degrade more rapidly at full load.
After having several failures, I always purchase a PSU with a higher rating than my expected load. --scryptr
I see your points...yet not sure if I follow your logic. There're lots of makers doing good quality PSUs, so buying one should not be that difficult. And investing in a top tier PSU will most likely save you money in long term. Few days of cards being idle may cover the price difference and trying to keep poor quality PSU in pristine conditions by paying premium for larger output and then running it at 50-70% doesn't make sense either. So I'd say the optimal PSU should be a quality one (good models from EVGA, Seasonic, Corsair, etc) and run at up to 90%(from the wall) of it's nominal capacity, which makes it about 80% actual load... 50 TO 70 PERCENT LOAD IS OPTIMAL-- The PSU will degrade faster at higher load. That is the fact. A good PSU will work at 90% load, but it will wear out at a faster rate as the components degrade more rapidly. --scryptr
|
|
|
|
Ursul0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 30, 2017, 01:56:30 PM |
|
50 TO 70 PERCENT LOAD IS OPTIMAL--
The PSU will degrade faster at higher load. That is the fact. A good PSU will work at 90% load, but it will wear out at a faster rate as the components degrade more rapidly. --scryptr
Optimal for what? It's possible to argue that if you won't unpack your PSU it will be even better for its longevity. However personal attachment to the quality of the PSU capacitors and/or whatever internal components may degrade with time should be outweighed by the practical needs and financial reasoning...
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 30, 2017, 02:32:30 PM Last edit: July 30, 2017, 02:45:48 PM by scryptr |
|
50 TO 70 PERCENT LOAD IS OPTIMAL--
The PSU will degrade faster at higher load. That is the fact. A good PSU will work at 90% load, but it will wear out at a faster rate as the components degrade more rapidly. --scryptr
Optimal for what? It's possible to argue that if you won't unpack your PSU it will be even better for its longevity. However personal attachment to the quality of the PSU capacitors and/or whatever internal components may degrade with time should be outweighed by the practical needs and financial reasoning... A PSU WILL EXPLODE-- Sitting next to a capacity loaded "quality" PSU when it explodes and pops smoke is frightening. I think I have more "bronze" paperweights than I need. I keep putting off stripping the good fans and scrap steel off of them for re-use and resale. The fact is the fact. Your money is yours. Buy nice or buy twice. --scryptr
|
|
|
|
deadsix
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 30, 2017, 06:31:40 PM |
|
Buy nice or buy twice. --scryptr
Words to live by.
|
|
|
|
kiaas
Jr. Member
Offline
Activity: 42
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 02:25:34 PM |
|
50 TO 70 PERCENT LOAD IS OPTIMAL--
The PSU will degrade faster at higher load. That is the fact. A good PSU will work at 90% load, but it will wear out at a faster rate as the components degrade more rapidly. --scryptr
Optimal for what? It's possible to argue that if you won't unpack your PSU it will be even better for its longevity. However personal attachment to the quality of the PSU capacitors and/or whatever internal components may degrade with time should be outweighed by the practical needs and financial reasoning... Efficiency curve, for starters. Some PSUs can reach up into the next tier of 80+ rating if at 45-65%, and that can sometimes pay for itself in power savings within the warranty period of the PSU. The second is Capacitors hate heat, they'll degrade in higher temperatures than cooler ones, and as they degrade they'll drop your actual max load, so keeping in the upper range of the curve provides both higher efficiency and longer lifespans of the PSU, so you aren't having to pay for a replacement every ~3 years. If it stays cool enough it might still be working for you 8 years down the road, even. May not be the best for immediate start-up costs but will absolutely have its benefits if you stay in the game.
|
|
|
|
YIz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 03, 2017, 05:15:56 PM |
|
I'm planning to get a Vega soon, when are you going to add support for it?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 03, 2017, 06:13:11 PM |
|
I'm planning to get a Vega soon, when are you going to add support for it?
In a few days. I don't like the hashrate I see currently, so I need some time to check possible ways to make it work faster.
|
|
|
|
Jukagid
Newbie
Offline
Activity: 64
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 03, 2017, 06:42:55 PM |
|
I'm planning to get a Vega soon, when are you going to add support for it?
Claymore said he will support it.
|
|
|
|
Raziel__
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 76
Merit: 10
Geniuses are always branded as crazy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 02:42:55 PM |
|
I'm planning to get a Vega soon, when are you going to add support for it?
In a few days. I don't like the hashrate I see currently, so I need some time to check possible ways to make it work faster. Vega will release on 14th or 15th of august. Claymore you are using FE right? Will there be differences?
|
This is madness. Prepare yourself miners, winter is here!
|
|
|
chinh.daongoc
Jr. Member
Offline
Activity: 64
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 06:43:16 AM |
|
Claymore could you add GPU number when got this error "Got 511 incorrect temperature. Ignore". I dont know which GPU made this error so it's hard to solve the problem.
By the way could you arrange GPU number position like new Ethereum miner?
|
|
|
|
|