Supercomputing
|
|
August 08, 2017, 07:01:58 PM |
|
v12.6:
- added Vega cards support (ASM mode). - added ASM mode for RX460/560 cards (+20% speed). - new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically. Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore. WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes! - added fan/OC support for 17.7.2 (and higher) drivers. - improved support for systems with more than 10 GPUs, check readme for "-di" option description for details. - added pool selection in runtime ("e" key). - a few minor improvements.
AMD Radeon Vega Frontier Edition @ stock clocks:AMD Cards available: 1 GPU #0: gfx900, 16192 MB available, 64 compute units GPU #0 recognized as Vega POOL version GPU #0 algorithm ASM, intensity 6 Total cards: 1 Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333 ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333 (unsecure) ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333) (unsecure) ZEC: Authorized Pool sets new share target: 0x00083126 (diff: 8000H) ZEC: 08/08/17-13:54:52 - New job from eu1-zcash.flypool.org:3333 ZEC - Total Speed: 311.773 H/s, Total Shares: 0, Rejected: 0, Time: 00:00 ZEC: GPU0 311.773 H/s
|
|
|
|
|
|
|
If you see garbage posts (off-topic, trolling, spam, no point, etc.), use the "report to moderator" links. All reports are investigated, though you will rarely be contacted about your reports.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
August 08, 2017, 07:26:43 PM |
|
v12.6:
- added Vega cards support (ASM mode). - added ASM mode for RX460/560 cards (+20% speed). - new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically. Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore. WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes! - added fan/OC support for 17.7.2 (and higher) drivers. - improved support for systems with more than 10 GPUs, check readme for "-di" option description for details. - added pool selection in runtime ("e" key). - a few minor improvements.
AMD Radeon Vega Frontier Edition @ stock clocks:AMD Cards available: 1 GPU #0: gfx900, 16192 MB available, 64 compute units GPU #0 recognized as Vega POOL version GPU #0 algorithm ASM, intensity 6 Total cards: 1 Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333 ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333 (unsecure) ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333) (unsecure) ZEC: Authorized Pool sets new share target: 0x00083126 (diff: 8000H) ZEC: 08/08/17-13:54:52 - New job from eu1-zcash.flypool.org:3333 ZEC - Total Speed: 311.773 H/s, Total Shares: 0, Rejected: 0, Time: 00:00 ZEC: GPU0 311.773 H/s That's bad. Worse than a 280X
|
|
|
|
igorsantos
Member
Offline
Activity: 179
Merit: 10
|
|
August 08, 2017, 07:29:40 PM |
|
RX460/560 cards (+20% speed)?Any tests?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
August 08, 2017, 07:39:08 PM |
|
v12.6:
- added Vega cards support (ASM mode). - added ASM mode for RX460/560 cards (+20% speed). - new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically. Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore. WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes! - added fan/OC support for 17.7.2 (and higher) drivers. - improved support for systems with more than 10 GPUs, check readme for "-di" option description for details. - added pool selection in runtime ("e" key). - a few minor improvements.
AMD Radeon Vega Frontier Edition @ stock clocks:AMD Cards available: 1 GPU #0: gfx900, 16192 MB available, 64 compute units GPU #0 recognized as Vega POOL version GPU #0 algorithm ASM, intensity 6 Total cards: 1 Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333 ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333 (unsecure) ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333) (unsecure) ZEC: Authorized Pool sets new share target: 0x00083126 (diff: 8000H) ZEC: 08/08/17-13:54:52 - New job from eu1-zcash.flypool.org:3333 ZEC - Total Speed: 311.773 H/s, Total Shares: 0, Rejected: 0, Time: 00:00 ZEC: GPU0 311.773 H/s That's bad. Worse than a 280X At startup the miner shows a notice that you must wait about a minute to get correct hashrate, but he ignored it, so he got some random number. I get 440H/s at stock clocks.
|
|
|
|
Golku
|
|
August 08, 2017, 08:02:19 PM |
|
v12.6:
- new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically.
Thanks for this new feature I was waiting ages for this!
|
|
|
|
Supercomputing
|
|
August 08, 2017, 08:10:47 PM |
|
At startup the miner shows a notice that you must wait about a minute to get correct hashrate, but he ignored it, so he got some random number. I get 440H/s at stock clocks.
Could I please have your launch configuration + OS + driver version? After 11.5 minutes:ZEC: 08/08/17-15:04:13 - SHARE FOUND - (GPU 0) ZEC: Share accepted (140 ms)! ZEC: 08/08/17-15:04:23 - New job from eu1-zcash.flypool.org:3333 ZEC - Total Speed: 260.951 H/s, Total Shares: 25, Rejected: 1, Time: 00:11 ZEC: GPU0 260.951 H/s ZEC: 08/08/17-15:04:29 - New job from eu1-zcash.flypool.org:3333 ZEC - Total Speed: 261.559 H/s, Total Shares: 25, Rejected: 1, Time: 00:11 ZEC: GPU0 261.559 H/sZEC: 08/08/17-15:04:48 - SHARE FOUND - (GPU 0) ZEC: Share accepted (156 ms)!
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
August 08, 2017, 08:22:26 PM Last edit: August 08, 2017, 08:47:16 PM by Claymore |
|
At startup the miner shows a notice that you must wait about a minute to get correct hashrate, but he ignored it, so he got some random number. I get 440H/s at stock clocks.
Could I please have your launch configuration + OS + driver version? After 11.5 minutes:ZEC: 08/08/17-15:04:13 - SHARE FOUND - (GPU 0) ZEC: Share accepted (140 ms)! ZEC: 08/08/17-15:04:23 - New job from eu1-zcash.flypool.org:3333 ZEC - Total Speed: 260.951 H/s, Total Shares: 25, Rejected: 1, Time: 00:11 ZEC: GPU0 260.951 H/s ZEC: 08/08/17-15:04:29 - New job from eu1-zcash.flypool.org:3333 ZEC - Total Speed: 261.559 H/s, Total Shares: 25, Rejected: 1, Time: 00:11 ZEC: GPU0 261.559 H/sZEC: 08/08/17-15:04:48 - SHARE FOUND - (GPU 0) ZEC: Share accepted (156 ms)! Windows 10, beta (closed) drivers. Probably it throttles, add "-tt 50" option to "config.txt". UPDATE: my bad, I really see 310H/s in Windows 7 + public drivers. So it is either drivers, or Windows version, I will check it right now. UPDATE2: it is drivers. If I use public drivers, I can get only 310-320H/s. For beta drivers, I get 440-450H/s. AMD should release new version of drivers asap, current public drivers are bad.
|
|
|
|
Supercomputing
|
|
August 08, 2017, 09:15:34 PM |
|
Windows 10, beta (closed) drivers. Probably it throttles, add "-tt 50" option to "config.txt". UPDATE: my bad, I really see 310H/s in Windows 7 + public drivers. So it is either drivers, or Windows version, I will check it right now. UPDATE2: it is drivers. If I use public drivers, I can get only 310-320H/s. For beta drivers, I get 440-450H/s. AMD should release new version of drivers asap, current public drivers are bad.
Thanks for the very useful info. AMD Radeon Vega Frontier Edition (Air) OS = Windows 7 Professional SP1 Driver = Radeon Vega Frontier Edition 17.6 Average Solutions per Second = 310 (throttles if you let it run for 10+ minutes) AMD Radeon Vega Frontier Edition(Liquid) / RYZEN 7 1800X or Core i7-7700K Will try later tonight with Windows 10 Professional or Ubuntu 16.04.3 LTS with beta drivers and report back
|
|
|
|
YIz
|
|
August 08, 2017, 09:20:50 PM |
|
v12.6:
- added Vega cards support (ASM mode). - added ASM mode for RX460/560 cards (+20% speed). - new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically. Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore. WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes! - added fan/OC support for 17.7.2 (and higher) drivers. - improved support for systems with more than 10 GPUs, check readme for "-di" option description for details. - added pool selection in runtime ("e" key). - a few minor improvements.
AMD Radeon Vega Frontier Edition @ stock clocks:AMD Cards available: 1 GPU #0: gfx900, 16192 MB available, 64 compute units GPU #0 recognized as Vega POOL version GPU #0 algorithm ASM, intensity 6 Total cards: 1 Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333 ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333 (unsecure) ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333) (unsecure) ZEC: Authorized Pool sets new share target: 0x00083126 (diff: 8000H) ZEC: 08/08/17-13:54:52 - New job from eu1-zcash.flypool.org:3333 ZEC - Total Speed: 311.773 H/s, Total Shares: 0, Rejected: 0, Time: 00:00 ZEC: GPU0 311.773 H/s That's bad. Worse than a 280X At startup the miner shows a notice that you must wait about a minute to get correct hashrate, but he ignored it, so he got some random number. I get 440H/s at stock clocks. 440H/s is worse than a Fiji, isn't it weird?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
August 08, 2017, 09:30:06 PM |
|
Windows 10, beta (closed) drivers. Probably it throttles, add "-tt 50" option to "config.txt". UPDATE: my bad, I really see 310H/s in Windows 7 + public drivers. So it is either drivers, or Windows version, I will check it right now. UPDATE2: it is drivers. If I use public drivers, I can get only 310-320H/s. For beta drivers, I get 440-450H/s. AMD should release new version of drivers asap, current public drivers are bad.
Thanks for the very useful info. AMD Radeon Vega Frontier Edition (Air) OS = Windows 7 Professional SP1 Driver = Radeon Vega Frontier Edition 17.6 Average Solutions per Second = 310 (throttles if you let it run for 10+ minutes) AMD Radeon Vega Frontier Edition(Liquid) / RYZEN 7 1800X or Core i7-7700K Will try later tonight with Windows 10 Professional or Ubuntu 16.04.3 LTS with beta drivers and report back I was not able to make Vega work in Ubuntu: gpu-pro drivers for Vega don't install OpenCL for some reason and my miner does not support ROCm. Though I could miss something because I'm not Linux guru. 440H/s is worse than a Fiji, isn't it weird?
It is about the same hashrate as Fury Nano. Yeah it is weird, but you can see that AMD has really bad drivers for Vega currently, I think they will improve it in the future. RX460/560 cards (+20% speed)?Any tests?
In my tests 107H/s -> 130H/s on stock RX460 2GB.
|
|
|
|
Branko
|
|
August 08, 2017, 09:34:07 PM |
|
|
|
|
|
scryptr
Legendary
Offline
Activity: 1793
Merit: 1028
|
|
August 08, 2017, 09:56:14 PM |
|
GOOD THREAD-- I will read it more often. --scryptr
|
|
|
|
jedigeiss
Newbie
Offline
Activity: 36
Merit: 0
|
|
August 08, 2017, 10:58:39 PM |
|
hi all together,
the 12.6 version crashes after building the opencl Programs for the GPUs... i got 2 7870 Pitcairns in that machine and the Program simply stops running after that. in 12.5 everything was fine ...
|
|
|
|
Metamorph
Newbie
Offline
Activity: 25
Merit: 0
|
|
August 09, 2017, 05:30:12 AM |
|
280x Version 12.6 crashing.
OpenCL initializing... AMD Cards available: 2 GPU #0: Tahiti, 3072 MB available, 32 compute units GPU #0 recognized as Radeon 280X GPU #1: Tahiti, 3072 MB available, 32 compute units GPU #1 recognized as Radeon 280X POOL version
and windows close.
|
|
|
|
chafer99
Member
Offline
Activity: 99
Merit: 10
|
|
August 09, 2017, 06:47:43 AM |
|
I use 12.3 version. My R-380`s Samsung mem. (1050/1600) ~ 250h/s, Elpida ~ 220h/s Version 12.4 - 12.6 better on Elpida mem. ~ 230h/s (Samsung ~ 230h/s).
|
|
|
|
trippcheck
|
|
August 09, 2017, 06:57:03 AM Last edit: August 09, 2017, 07:38:18 AM by trippcheck |
|
yes by me too
force close
win 7 64bit 6 x r9 280x
|
|
|
|
Tomintx
Member
Offline
Activity: 69
Merit: 10
|
|
August 09, 2017, 07:20:42 AM |
|
v12.6:
- new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically. Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore.
Really glad to see this feature! Too bad this does not work on my systems - fails to start on Linux 15.04 (15.04 Because old drivers are best drivers for old cards, and old cards are best cards because paid for!) Crashes in seconds on Win 7 box. Have not installed on Win 10 boxes. Waiting to hear more about others' experiences before spending more time.
|
|
|
|
12val1212
Newbie
Offline
Activity: 5
Merit: 0
|
|
August 09, 2017, 08:46:01 AM |
|
What about unlocked RX460 As I know Crimson 16.12.2 checks the bios
|
|
|
|
winiu
Newbie
Offline
Activity: 11
Merit: 0
|
|
August 09, 2017, 09:29:11 AM |
|
hi all together,
the 12.6 version crashes after building the opencl Programs for the GPUs... i got 2 7870 Pitcairns in that machine and the Program simply stops running after that. in 12.5 everything was fine ...
The same here... but with 2x 280x http://prntscr.com/g695s5
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
August 09, 2017, 11:09:16 AM |
|
After some more tests I found the reason of possible closing/crashing, I uploaded v12.6 again, please re-download it.
|
|
|
|
|