PVmining
|
|
July 25, 2014, 04:58:26 PM |
|
Running on linux, and I get 230H/s @1350Mhz core/stock memory 750 ti. But I have a low end CPU (cheap haswell @50$) , that probably the point ?
nope... G3220... but do you use the -l switch (launch-config)? without I get 10-15% less. which cards do you use?
|
|
|
|
Amph
Legendary
Offline
Activity: 3206
Merit: 1069
|
|
July 25, 2014, 05:46:33 PM Last edit: July 25, 2014, 08:09:07 PM by Amph |
|
i've added chaincoin to cudamining.cc, was pretty easy forked from djm x17, my personal version use accepted and rejected instead of yay and boo, i like them more lol amph i tried chain coin that you compiled and it just open then closes instantly. heres my command file. ccminer.exe -a chain thats it. do i need any more commands? thanks EDIT: i have it, I missed the c11 i like to use short command, but -a chain was more intuitive i agree edit...added the source for the algo only, just import it to your source the rest is the same , no point in adding it
|
|
|
|
unitedminers
|
|
July 25, 2014, 06:10:52 PM |
|
For sgminer, I already modified the kernel to use Uray modification (the kernel is in my github and can used right away with binaries...) I am pretty sure I already told you so, since you asked me for it (or at least I posted the info on the relevant thread... whirlcoin) So many threads, so many questions, so many posts from other members between and last but not least spoiled by Reddit ... THANK YOU VERY MUCH
|
|
|
|
volodzya
Newbie
Offline
Activity: 10
Merit: 0
|
|
July 25, 2014, 06:11:53 PM |
|
disable any Windows visualization effects via system properties > advanced > settings > adjust for best performance
|
|
|
|
thefrog
|
|
July 25, 2014, 07:47:51 PM |
|
The main GPU is not working at 100%, what can be done? disable any Windows visualization effects via system properties > advanced > settings > adjust for best performance I get Jul 25 21:46:41 minera4 cpuminer[2945]: GPU #0: GeForce GTX 750, 2118 khash/s Jul 25 21:46:41 minera4 cpuminer[2945]: GPU #1: GeForce GTX 750, 2130 khash/s on a 750 NON-TI, with a bit of overclocking. No did not alter bios.
|
|
|
|
th00ber
|
|
July 25, 2014, 07:50:29 PM |
|
Running on linux, and I get 230H/s @1350Mhz core/stock memory 750 ti. But I have a low end CPU (cheap haswell @50$) , that probably the point ?
nope... G3220... but do you use the -l switch (launch-config)? without I get 10-15% less. which cards do you use? yep, I test with -l 8x60 on a Gigabyte 750 Ti (1345 core / 1350 mem) : this model GV-N75TWF2OC-2GI
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 25, 2014, 08:15:51 PM |
|
new version of ccminer: * small improvement over whirlcoin (increased the total number of threads): gpu usage is 99% for the gtx780ti (as well as the gtx750ti) in terms of performance: I was getting before for gtx780ti+gtx750ti = around 19MH/s now I get 20.6MHash/s. * added keccak256 (maxcoin) to ccminer It isn't a port of cudaminer as it makes use of the main function of keccak512 instead of the one of cudaminer. In terms of performance. cudaminer gives over my gtx780ti (OC) 293MHash/s, with this kernel I get around 300MHash/s (I am not sure if the problem of low share getting registered by pool is still present or not... I would assume yes). Please watch the number of rejected shares. This one can be high (it is due to the use of a difficulty multiplier, and some tuning is still needed there) The changes have been included into https://github.com/djm34/ccminerIt should compile on linux however it is untested. I don't plan to release binaries.
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Amph
Legendary
Offline
Activity: 3206
Merit: 1069
|
|
July 25, 2014, 08:32:20 PM |
|
the changes for whirlcoin are just in the whirlcoin.cu? thus i don't re-compile everything
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 25, 2014, 08:37:59 PM |
|
the changes for whirlcoin are just in the whirlcoin.cu? thus i don't re-compile everything
no, I made several change in whirlcoin.cu and cuda_whirlpool512.cu. Also it use a specific maxregcount, you need to update ccminer.vxproj (which will break everything since it will want to compile keccak etc... ). Personnally, I would recompile everything to avoid editing everything by hand (and your computer is fast...)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Amph
Legendary
Offline
Activity: 3206
Merit: 1069
|
|
July 25, 2014, 08:46:27 PM |
|
the changes for whirlcoin are just in the whirlcoin.cu? thus i don't re-compile everything
no, I made several change in whirlcoin.cu and cuda_whirlpool512.cu. Also it use a specific maxregcount, you need to update ccminer.vxproj (which will break everything since it will want to compile keccak etc... ). Personnally, I would recompile everything to avoid editing everything by hand (and your computer is fast...) too lazy now for all that lol, is a small improvement anyway, i'll wait further improvements, before changing all my desktop shortcut again, it's really a pain in the ass to do it for every update
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 25, 2014, 08:55:46 PM |
|
the changes for whirlcoin are just in the whirlcoin.cu? thus i don't re-compile everything
no, I made several change in whirlcoin.cu and cuda_whirlpool512.cu. Also it use a specific maxregcount, you need to update ccminer.vxproj (which will break everything since it will want to compile keccak etc... ). Personnally, I would recompile everything to avoid editing everything by hand (and your computer is fast...) too lazy now for all that lol, is a small improvement anyway, i'll wait further improvements, before changing all my desktop shortcut again, it's really a pain in the ass to do it for every update that's because you are not well organized usually, I just copy new exe from one directory to the one where my shortcut points... (actually that's what I would do if I had shortcut )
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Amph
Legendary
Offline
Activity: 3206
Merit: 1069
|
|
July 25, 2014, 09:03:50 PM |
|
the changes for whirlcoin are just in the whirlcoin.cu? thus i don't re-compile everything
no, I made several change in whirlcoin.cu and cuda_whirlpool512.cu. Also it use a specific maxregcount, you need to update ccminer.vxproj (which will break everything since it will want to compile keccak etc... ). Personnally, I would recompile everything to avoid editing everything by hand (and your computer is fast...) too lazy now for all that lol, is a small improvement anyway, i'll wait further improvements, before changing all my desktop shortcut again, it's really a pain in the ass to do it for every update snip that's because you are not well organized usually, I just copy new exe from one directory to the one where my shortcut points... (actually that's what I would do if I had shortcut ) lol never thought about that how stupid
|
|
|
|
ilovecudacompute
Member
Offline
Activity: 112
Merit: 10
|
|
July 25, 2014, 10:02:08 PM |
|
I don't plan to release binaries.
djm34 you mean generally or only for this instance only ??
|
|
|
|
cayars
|
|
July 25, 2014, 11:08:53 PM |
|
the changes for whirlcoin are just in the whirlcoin.cu? thus i don't re-compile everything
no, I made several change in whirlcoin.cu and cuda_whirlpool512.cu. Also it use a specific maxregcount, you need to update ccminer.vxproj (which will break everything since it will want to compile keccak etc... ). Personnally, I would recompile everything to avoid editing everything by hand (and your computer is fast...) too lazy now for all that lol, is a small improvement anyway, i'll wait further improvements, before changing all my desktop shortcut again, it's really a pain in the ass to do it for every update that's because you are not well organized usually, I just copy new exe from one directory to the one where my shortcut points... (actually that's what I would do if I had shortcut ) I have everything driven from a database for my rigs. I'd go nuts using shortcuts on each machine.
|
|
|
|
king_pin
|
|
July 26, 2014, 01:45:20 AM Last edit: July 26, 2014, 02:17:43 AM by king_pin |
|
HI, I am new to cuda mining, thoe I have a little experience with AMD mining. I am getting around 2400 kH/s with my GTX 750TIs for X11 I am using ccminer core - 1355 mem - 1524
Is that good? Can I get more? GPU usage is constantly twitching between 90% and 100% and I have heard of those cards reaching 3000 kH/s with hard overclock I don't aim at 3000 but I think I should get more.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 26, 2014, 02:00:56 AM |
|
HI, I am new to cuda mining, thoe I have a little experience with AMD mining. I am getting around 2350 kH/s with my GTX 750TIs for X11 I am using ccminer core - 1355 mem - 1524
Is that good? Can I get more? GPU usage is constantly twitching between 90% and 100% and I have heard of those cards reaching 3000 kH/s with hard overclock I don't aim at 3000 but I think I should get more.
are you sure it is the gpu usage and not the power usage ? If it is gpu usage it shouldn't unless, may-be, if you use a very old version post killer groeslt (and even then I never see anything like that). However the power usage varies quite a lot... also the mem clock seems low (I am 2740MHz or do I have to divide by two ~1370 ?). I get ~2700MH/s on X11 (more or less original one) with a core clock of 1350MHz... no after that all card behave a bit differently from each other... My only advice, try to use a recent version, there is parameter to adjust...
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
king_pin
|
|
July 26, 2014, 02:22:30 AM |
|
are you sure it is the gpu usage and not the power usage ? If it is gpu usage it shouldn't unless, may-be, if you use a very old version post killer groeslt (and even then I never see anything like that). However the power usage varies quite a lot...
also the mem clock seems low (I am 2740MHz or do I have to divide by two ~1370 ?). I get ~2700MH/s on X11 (more or less original one) with a core clock of 1350MHz... no after that all card behave a bit differently from each other...
My only advice, try to use a recent version, there is parameter to adjust...
I got it to 2400kH/s and I am looking at the GPU usage thru GPUz, actually when I am not logged in (when windows turns the monitor off) it stabilizes. I am looking at the frequencies from GPUz as well, so IDK.... is my mem too low??? I guess I should experiment with freq. but am I using the right miner: ccminer35-50.exe and 337.88 WHQLI got it from IDK where.... wich one is the most optimized miner/kernel for X11 Thanks
|
|
|
|
e6ug
|
|
July 26, 2014, 02:38:11 AM |
|
are you sure it is the gpu usage and not the power usage ? If it is gpu usage it shouldn't unless, may-be, if you use a very old version post killer groeslt (and even then I never see anything like that). However the power usage varies quite a lot...
also the mem clock seems low (I am 2740MHz or do I have to divide by two ~1370 ?). I get ~2700MH/s on X11 (more or less original one) with a core clock of 1350MHz... no after that all card behave a bit differently from each other...
My only advice, try to use a recent version, there is parameter to adjust...
I got it to 2400kH/s and I am looking at the GPU usage thru GPUz, actually when I am not logged in (when windows turns the monitor off) it stabilizes. I am looking at the frequencies from GPUz as well, so IDK.... is my mem too low??? I guess I should experiment with freq. but am I using the right miner: ccminer35-50.exe and 337.88 WHQLI got it from IDK where.... wich one is the most optimized miner/kernel for X11 Thanks check out cudamining.cc good site
|
|
|
|
Amph
Legendary
Offline
Activity: 3206
Merit: 1069
|
|
July 26, 2014, 07:24:00 AM |
|
the changes for whirlcoin are just in the whirlcoin.cu? thus i don't re-compile everything
no, I made several change in whirlcoin.cu and cuda_whirlpool512.cu. Also it use a specific maxregcount, you need to update ccminer.vxproj (which will break everything since it will want to compile keccak etc... ). Personnally, I would recompile everything to avoid editing everything by hand (and your computer is fast...) too lazy now for all that lol, is a small improvement anyway, i'll wait further improvements, before changing all my desktop shortcut again, it's really a pain in the ass to do it for every update that's because you are not well organized usually, I just copy new exe from one directory to the one where my shortcut points... (actually that's what I would do if I had shortcut ) I have everything driven from a database for my rigs. I'd go nuts using shortcuts on each machine. don't like using third party software or whatever, actually shortcuts are great you can run very fast each algo, i just forgot about the path for exe, now with that no problems anymore
|
|
|
|
discodancer
Sr. Member
Offline
Activity: 378
Merit: 250
Time is Money - Benjamin Franklin
|
|
July 26, 2014, 07:29:22 AM |
|
snipp..
djm, wondering if there will be any chance of adding cryptonite to ccminer?
|
|
|
|
|