djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 29, 2014, 11:08:26 AM |
|
Im only getting 80% accepted shares with doomcoin. Is this normal for this algo??
use -f 0.125 or -f 0.25 to increase the difficulty of the shares solved by the miner. There is a problem at that level, the miner is sending several time the same share (I got that info by thecoinfinder...) Is this the way to send fake share ? (but here, it isn't intentional)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
polanskiman
|
|
July 29, 2014, 11:13:39 AM |
|
Carlo,
Are you available?
|
|
|
|
TheFridge
|
|
July 29, 2014, 11:13:57 AM |
|
Im only getting 80% accepted shares with doomcoin. Is this normal for this algo??
use -f 0.125 or -f 0.25 to increase the difficulty of the shares solved by the miner. There is a problem at that level, the miner is sending several time the same share (I got that info by thecoinfinder...) Is this the way to send fake share ? (but here, it isn't intentional) Ahh that did it. Thanks for quick reply
|
|
|
|
cayars
|
|
July 29, 2014, 11:23:35 AM |
|
Carlo,
Are you available?
Available for Dinner? A Movie? LOL Actually just getting ready to leave for work. What's up? Carlo
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 29, 2014, 11:26:53 AM |
|
Carlo,
Are you available?
Available for Dinner? A Movie? LOL among all the topics which have been covered by this thread (including animal pornography... very recently ), I don't think it has been used for dating... so far... (geeky dating involving programming doesn't count...)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
tsiv
|
|
July 29, 2014, 11:30:10 AM |
|
tsiv you did solomine 150 blocks from total 600 blocks till now? LOL the fastest instaminer title in the cryptoworld from djm34 should be given to you yep I doesn't have that much I solomined only 5950 (took me a while to get the R9 working strangely...), but blocks are still coming... (actually there wasn't any instamine or I arrived late to that coin... and block wasn't coming that easily even when I was doing 1/2 of the net hashrate) ok there is still 331 unaccounted blocks I was up and running with 290 MH/s roughly 2 minutes from the wallet made available, I'd say that qualifies as insta Sitting on 156 blocks solomined now and the diff is looking like it's time to switch to a pool.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 29, 2014, 11:32:26 AM |
|
tsiv you did solomine 150 blocks from total 600 blocks till now? LOL the fastest instaminer title in the cryptoworld from djm34 should be given to you yep I doesn't have that much I solomined only 5950 (took me a while to get the R9 working strangely...), but blocks are still coming... (actually there wasn't any instamine or I arrived late to that coin... and block wasn't coming that easily even when I was doing 1/2 of the net hashrate) ok there is still 331 unaccounted blocks I was up and running with 290 MH/s roughly 2 minutes from the wallet made available, I'd say that qualifies as insta Sitting on 156 blocks solomined now and the diff is looking like it's time to switch to a pool. I am getting a block every half hours, last one just as I read that post (this would be heaven in xpm world, where people sell solo mining software to get a block every 2 or 3 days)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
polanskiman
|
|
July 29, 2014, 11:39:49 AM |
|
Carlo,
Are you available?
Available for Dinner? A Movie? LOL Actually just getting ready to leave for work. What's up? Carlo You offered to check my rig. I sent you a few PMs.
|
|
|
|
cayars
|
|
July 29, 2014, 11:52:41 AM |
|
Ahh,
I accidentally deleted my PMs and couldn't remember who it was.
Can we do it tonight after work (I'm in US)?
Carlo
|
|
|
|
|
Strannik-74
|
|
July 29, 2014, 11:56:44 AM |
|
can someone help me with setting up 750ti for mineing XMR? i have it running but it seems to only do 23h/s. 340.43 beta drivers win 8 newest CCminer done by tsiv.
i have no idea as this is my first Nvidia build.
6x750Ti - CryptoNight - 316W [2014-07-28 15:52:38] Stratum detected new block [2014-07-28 15:52:39] GPU #3: GeForce GTX 750 Ti, 283.68 H/s [2014-07-28 15:52:39] GPU #5: GeForce GTX 750 Ti, 283.17 H/s [2014-07-28 15:52:39] GPU #4: GeForce GTX 750 Ti, 283.37 H/s [2014-07-28 15:52:39] GPU #1: GeForce GTX 750 Ti, 283.25 H/s [2014-07-28 15:52:40] GPU #0: GeForce GTX 750 Ti, 283.72 H/s [2014-07-28 15:52:40] GPU #2: GeForce GTX 750 Ti, 283.14 H/s [2014-07-28 15:53:11] accepted: 201/201 (100.00%), 1700.33 H/s - Yay nvminer.exe -a cryptonight -o stratum+tcp://mro.extremehash.com:9999 -u 48G...WuJ -p x pause
|
|
|
|
tsiv
|
|
July 29, 2014, 11:57:04 AM |
|
Hey TSIV, thanks for your XMR miner and all your contributions !
I'm getting 230KH/s at the moment with overclocked 750 Ti and -l 8x60 parameter.
Any advice to get a bit more or it seems good enough like that ?
230 isn't horribly bad, but not great for an overclocked 750 Ti either. The Asus DC2OC on my win box is doing 244 at the default factory oc (1072 core, 900/5400 mem) with a variety of similar sized configs, 8x60/16x30/32x15. Same configs work well on my Linux rig, again 750 Tis but this time the oc is 1202 core and 1000/6000 mem for 280 H/s. On the other hand we've just had some people report piss poor performance with 750 Ti and 8x60 while 8x30 worked a lot better. Haven't got a clue why, might have something to do with newer drivers or something You could try playing around with the launch config a bit, could also the latest nvMiner by cayars from http://www.cudamining.cc/url/releases if you're on Windows.
|
|
|
|
polanskiman
|
|
July 29, 2014, 11:57:10 AM |
|
Ahh,
I accidentally deleted my PMs and couldn't remember who it was.
Can we do it tonight after work (I'm in US)?
Carlo Yes, that will probably be morning for me of tomorrow 8am (9pm for you today NY time).
|
|
|
|
cayars
|
|
July 29, 2014, 12:01:08 PM |
|
Ahh,
I accidentally deleted my PMs and couldn't remember who it was.
Can we do it tonight after work (I'm in US)?
Carlo Yes, that will probably be morning for me of tomorrow 8am (9pm for you today NY time). That time will be perfect for me.
|
|
|
|
polanskiman
|
|
July 29, 2014, 12:03:54 PM |
|
Ahh,
I accidentally deleted my PMs and couldn't remember who it was.
Can we do it tonight after work (I'm in US)?
Carlo Yes, that will probably be morning for me of tomorrow 8am (9pm for you today NY time). That time will be perfect for me. Great, thanks. I sent you a PM.
|
|
|
|
cayars
|
|
July 29, 2014, 12:06:28 PM |
|
Hey TSIV, thanks for your XMR miner and all your contributions !
I'm getting 230KH/s at the moment with overclocked 750 Ti and -l 8x60 parameter.
Any advice to get a bit more or it seems good enough like that ?
230 isn't horribly bad, but not great for an overclocked 750 Ti either. The Asus DC2OC on my win box is doing 244 at the default factory oc (1072 core, 900/5400 mem) with a variety of similar sized configs, 8x60/16x30/32x15. Same configs work well on my Linux rig, again 750 Tis but this time the oc is 1202 core and 1000/6000 mem for 280 H/s. On the other hand we've just had some people report piss poor performance with 750 Ti and 8x60 while 8x30 worked a lot better. Haven't got a clue why, might have something to do with newer drivers or something You could try playing around with the launch config a bit, could also the latest nvMiner by cayars from http://www.cudamining.cc/url/releases if you're on Windows. Don't feel bad. My Gigabyte 750TIs with factory OC will only do 208 H/s (average) and I've tried everything with them. Some cards (could be type of memory) just perform lousy on certain algos and well on others.
|
|
|
|
TheFridge
|
|
July 29, 2014, 12:09:08 PM |
|
Im only getting 80% accepted shares with doomcoin. Is this normal for this algo??
use -f 0.125 or -f 0.25 to increase the difficulty of the shares solved by the miner. There is a problem at that level, the miner is sending several time the same share (I got that info by thecoinfinder...) Is this the way to send fake share ? (but here, it isn't intentional) Ahh that did it. Thanks for quick reply Hmm so now with putting the diff command into the .bat the pool is only showing 30MH (and 160MH in ccminer) 93% rejects in ccminer. Is that diff to high for 3 750ti's? Edit: 93% accepted
|
|
|
|
cayars
|
|
July 29, 2014, 12:13:09 PM |
|
Carlo,
Are you available?
Available for Dinner? A Movie? LOL among all the topics which have been covered by this thread (including animal pornography... very recently ), I don't think it has been used for dating... so far... (geeky dating involving programming doesn't count...) LOL, yea it's about the only topic that hasn't been here recently.
|
|
|
|
cayars
|
|
July 29, 2014, 12:15:20 PM |
|
Im only getting 80% accepted shares with doomcoin. Is this normal for this algo??
use -f 0.125 or -f 0.25 to increase the difficulty of the shares solved by the miner. There is a problem at that level, the miner is sending several time the same share (I got that info by thecoinfinder...) Is this the way to send fake share ? (but here, it isn't intentional) Ahh that did it. Thanks for quick reply Hmm so now with putting the diff command into the .bat the pool is only showing 30MH (and 160MH in ccminer) 93% rejects in ccminer. Is that diff to high for 3 750ti's? Edit: 93% accepted Out of curiosity, could you try the latest nvMiner with doom.suprnova.cc and let us know how this works?
|
|
|
|
Madychoux
|
|
July 29, 2014, 12:25:51 PM |
|
Hey TSIV, thanks for your XMR miner and all your contributions !
I'm getting 230KH/s at the moment with overclocked 750 Ti and -l 8x60 parameter.
Any advice to get a bit more or it seems good enough like that ?
230 isn't horribly bad, but not great for an overclocked 750 Ti either. The Asus DC2OC on my win box is doing 244 at the default factory oc (1072 core, 900/5400 mem) with a variety of similar sized configs, 8x60/16x30/32x15. Same configs work well on my Linux rig, again 750 Tis but this time the oc is 1202 core and 1000/6000 mem for 280 H/s. On the other hand we've just had some people report piss poor performance with 750 Ti and 8x60 while 8x30 worked a lot better. Haven't got a clue why, might have something to do with newer drivers or something You could try playing around with the launch config a bit, could also the latest nvMiner by cayars from http://www.cudamining.cc/url/releases if you're on Windows. Ok thanks ! Will see when the drivers are updated. I get 12 cards on 2 x6 rigs with Kopiemtu Linux and your latest miner.
|
|
|
|
|