[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[tbearhere]

luffa is also in djm34's ccminer.

https://mega.co.nz/#!oFdSBDoQ!6b7UZVYvPe2BXAagCAWlSEYKUK4-EMKsIJ0ODYZIsZs

I ran your .bat on my win 7 machine, and it had the capital 'M'.

no no go im going to start all over and give that a try. i dont get it b back

[Equitum]

It seems like the difficulty threshold on suprnova being as low as it is is tripping their share spoofing detector or something... I only get about a minute and a half where the miner shares are accepted (both with djm's miner and nvMiner-D7), and then every share is rejected.

Edit: Seems the suprnova guys are onto the issue! https://bitcointalk.org/index.php?topic=713003.msg8089093#msg8089093

Edit2: Seems they overshot on the difficulty... A bit too high for my rig at least.

[djm34]

luffa is also in djm34's ccminer.

https://mega.co.nz/#!oFdSBDoQ!6b7UZVYvPe2BXAagCAWlSEYKUK4-EMKsIJ0ODYZIsZs

I ran your .bat on my win 7 machine, and it had the capital 'M'.

no no go im going to start all over and give that a try. i dont get it b back

it doesn't matter, I put a capital letter in my ccminer command line, it runs as usual... actually MS still doesn't know about capital letter...
if this application closes and exits right away, it means a command isn't recognized.
You need to write in your bat file pause after the command line, the windows won't disappear...

[ilovecudacompute]

Improved my BBR miner (nsfw as always): https://ottrbutt.com/tmp/bbrcudaminer2.png

790kh/s, 750Ti @ stock clocks 

Impressive....also i dont have any problems with the new nvidia drivers....i start to worry about it

[tbearhere]

luffa is also in djm34's ccminer.

https://mega.co.nz/#!oFdSBDoQ!6b7UZVYvPe2BXAagCAWlSEYKUK4-EMKsIJ0ODYZIsZs

I ran your .bat on my win 7 machine, and it had the capital 'M'.

no no go im going to start all over and give that a try. i dont get it b back

it doesn't matter, I put a capital letter in my ccminer command line, it runs as usual... actually MS still doesn't know about capital letter...
if this application closes and exits right away, it means a command isn't recognized.
You need to write in your bat file pause after the command line, the windows won't disappear...

i looked at everything and the pause command wont work either it doesn't make any sense  i dont know

[Breadpudding]

Just to make sure, you put the pause command on a new line right?

i looked at everything and the pause command wont work either it doesn't make any sense  i dont know

[tbearhere]

Just to make sure, you put the pause command on a new line right?

i looked at everything and the pause command wont work either it doesn't make any sense  i dont know

nvMiner65.exe -a luffa -o stratum+tcp://doom.suprnova.cc:5111 -u razorsedge.doom1  -p x  -d 0,1,2,3
:pause

is that correct ?
EDIT:opens and closes
im going to download cuda and try a new file see if i dont know

everything else is fine its that algo

[shuttwind215]

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:
https://i.imgur.com/PWYWE3K.png?1

[tbearhere]

Just to make sure, you put the pause command on a new line right?

i looked at everything and the pause command wont work either it doesn't make any sense  i dont know

its not recognized  as an internal or external command....my bat file

[ilovecudacompute]

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:

If you run with auto-tune do you get any errors ??

[Breadpudding]

Try it with no ":", when I put that there it skips over the command.

Just to make sure, you put the pause command on a new line right?

i looked at everything and the pause command wont work either it doesn't make any sense  i dont know

nvMiner65.exe -a luffa -o stratum+tcp://doom.suprnova.cc:5111 -u razorsedge.doom1  -p x  -d 0,1,2,3
:pause

[djm34]

Try it with no ":", when I put that there it skips over the command.

Just to make sure, you put the pause command on a new line right?

i looked at everything and the pause command wont work either it doesn't make any sense  i dont know

nvMiner65.exe -a luffa -o stratum+tcp://doom.suprnova.cc:5111 -u razorsedge.doom1  -p x  -d 0,1,2,3
:pause

remove the ":" in front of pause

[shuttwind215]

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:
https://i.imgur.com/PWYWE3K.png?1

If you run with auto-tune do you get any errors ??

Those were settings from auto-tune(yeah it crashed too) ,everytime I auto_Tune it just crashes after founding correct kernel doing one output ,I thinked that maybe I should put kernel settings on start(who knows).
Do you use Intel Graphics for monitor output?

[tbearhere]

Try it with no ":", when I put that there it skips over the command.

Just to make sure, you put the pause command on a new line right?

i looked at everything and the pause command wont work either it doesn't make any sense  i dont know

nvMiner65.exe -a luffa -o stratum+tcp://doom.suprnova.cc:5111 -u razorsedge.doom1  -p x  -d 0,1,2,3
:pause

wow it worked and says unable to query number of cuda dievices! is an nvidia driver installed  

3788 is in
EDIT: driver 340.43 will not work on mine that must b the problem
im going to try 340.52

[Breadpudding]

Hm, that's weird, I got that error before I put in the 340.43 beta drivers last night.

Ya, hopefully the new 340.52 drivers fix the problem

wow it worked and says unable to query number of cuda dievices! is an nvidia driver installed  

3788 is in
EDIT: driver 340.43 will not work on mine that must b the problem
im going to try 340.52

[ilovecudacompute]

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:

If you run with auto-tune do you get any errors ??

Those were settings from auto-tune(yeah it crashed too) ,everytime I auto_Tune it just crashes after founding correct kernel doing one output ,I thinked that maybe I should put kernel settings on start(who knows).
Do you use Intel Graphics for monitor output?

I have never mined YAC maybe someone more knowledgeable than me can help you with that coin
If auto-tune crashes too maybe something else is wrong? did you make any recent changes in hardware/drivers etc ?

[tbearhere]

Hm, that's weird, I got that error before I put in the 340.43 beta drivers last night.

Ya, hopefully the new 340.52 drivers fix the problem

wow it worked and says unable to query number of cuda dievices! is an nvidia driver installed  

3788 is in
EDIT: driver 340.43 will not work on mine that must b the problem
im going to try 340.52

loading in now 

[Breadpudding]

Hi djm34 & tsiv,

Thanks for putting that new luffa algo in your miners right away

Is it normal that i'm only getting 57.5Mhs max hash with your new luffa miners, on a 750ti overclocked, solo and on the supr pool?

BP

[shuttwind215]

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:
https://i.imgur.com/PWYWE3K.png?1

If you run with auto-tune do you get any errors ??

Those were settings from auto-tune(yeah it crashed too) ,everytime I auto_Tune it just crashes after founding correct kernel doing one output ,I thinked that maybe I should put kernel settings on start(who knows).
Do you use Intel Graphics for monitor output?

I have never mined YAC maybe someone more knowledgeable than me can help you with that coin
If auto-tune crashes too maybe something else is wrong? did you make any recent changes in hardware/drivers etc ?

Installed CUDA.
With cuda there where bundled new Graphic Card Driver ,no hardware changes.
Yes I have rebooted win7 64 after cuda installed ,and yes I've selected x64 win7 cuda drivers for desktop.
It would not be such a big deal If minerd worked with YAC ,and moddified minerd(with some cpu extensions support) worked with stratum.

[exemplaar]

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:

If you run with auto-tune do you get any errors ??

Those were settings from auto-tune(yeah it crashed too) ,everytime I auto_Tune it just crashes after founding correct kernel doing one output ,I thinked that maybe I should put kernel settings on start(who knows).
Do you use Intel Graphics for monitor output?

I have never mined YAC maybe someone more knowledgeable than me can help you with that coin
If auto-tune crashes too maybe something else is wrong? did you make any recent changes in hardware/drivers etc ?

Installed CUDA.
With cuda there where bundled new Graphic Card Driver ,no hardware changes.
Yes I have rebooted win7 64 after cuda installed ,and yes I've selected x64 win7 cuda drivers for desktop.
It would not be such a big deal If minerd worked with YAC ,and moddified minerd(with some cpu extensions support) worked with stratum.

You should contact member IvanLabrie. He is expert in yacoin mining with nvidia.
Send him PM.
you should find some help also here:
http://www.overclock.net/t/1468166/gtx-750-ti-mining