EWBF's CUDA Zcash miner

[kirillkizill]

1st score is a single EVGA 1070 FTW - 70% TDP (128-130W)  Was offline for about an hour that is why the average is only 450, its normally around 470.

Wow, on what frequencies does your EVGA 1070 FTW work with TDP 130W?

very mediocre result.
palit sjs 1070 can do 490sols@130w stable

good afternoon
About twice a day, the miner flies into an error
The slave pauses until I restart the coinmine program again
Please tell me how to do it so that if the error continues to appear, the program is automatically restarted
Or what should be done, that there would be no more mistakes

[OKyHb]

very mediocre result.
palit sjs 1070 can do 490sols@130w stable

How?!? How did you get such results? Please, show your frequencies!

[nUm81]

1st score is a single EVGA 1070 FTW - 70% TDP (128-130W)  Was offline for about an hour that is why the average is only 450, its normally around 470.

Wow, on what frequencies does your EVGA 1070 FTW work with TDP 130W?

I run all cards at +100 core and +600 memory.

[MeistroUK]

Have been running ASUS 8 x ASUS 1060s 3GB and 1 x ASUS 1050 ti just now the 1060s do about 260sol at about 77w each, 1050 ti is 160sol at about 80 w and this Palit Super Jetstream 1070 I got today is doing 460sol at 82w and is barely audible... I found that quite a shock (in a good way)

[nUm81]

Have been running ASUS 8 x ASUS 1060s 3GB and 1 x ASUS 1050 ti just now the 1060s do about 260sol at about 77w each, 1050 ti is 160sol at about 80 w and this Palit Super Jetstream 1070 I got today is doing 460sol at 82w and is barely audible... I found that quite a shock (in a good way)

What are your settings for the 1070?

[MeistroUK]

I put it down to 80% power and cant mind the overclock I did as just done it fast to check, was something like 70 on the core and 350 on the memory

[fullzero]

80% TDP gives around 470-80sol on 1070 with EWBF's miner...

Not on my rigs. The EWBF miner seem to be slow when you run 6 cards in the rig. (meassured on the pool)

I am testing on a 6 gtx 1070 rig and a 1840 celeron cpu / 4gig ram.  (80% tdp with oc gigabyte g1 gaming)

Reported in the miner window 2700 (450 sol/s per card
Reported on the pool 24h (flypool.org) 2500 (416.66 sol/s per card)


I did a test with more than one rig, and all of them can't break 2500 with 6x 1070 cards using the  EWBF miner.

 Even on a single-card rig I've never managed over 450ish with a 1070, and at 80% think I've yet to see over 430 or so. Your G1 Gaming cards stock clock a hair higher than my 2-fan models though.

 To go6ooo1212 - TDP VARIES - my Gigabyte full-length 1070s have a 180 watt TDP, while my EVGA SC 1070s and my ITX Gigabyte 1070s are TDP 154 or 155 watts - stating "80% TDP" doesn't mean anything if you don't state the specific card model or specify the watts.

While I do agree that there is a difference in performance with 6 cards vs 1 or 2 with EWBF I don't think its as bad as you describe.  Also you should be able to get up to 470 sol/s using more power and OC no problem with EWBF.  If flypool is only giving you 416 sol/s I would try another pool.  My higher clocked / higher tdp 6x 1070 rig is currently at 2817 sol/s poolside (6 hour average) with nanopool.

edit: and that rig is using a G1840 celeron cpu and 4gb of ram WHILE mining XMR with cpuminer-opt 

[fatsailor]

Has anyone had luck getting the miner to run on GTX 1080 TI Founder's Edition?

This is my current configuration... Workers fail with no real error info...

Nvidia Driver: 381.22 (Ubuntu 16)
CUDA Version: 8.0.61

I'm using driver 378.13 on Ubuntu 16.04 server and headless with a 1080 Ti. It only uses as much memory as my 1080's so nearly half of the memory is unused. I suspect things could be massively improved on the card. I'm getting 650 sol/s on the card currently with stock settings.

I have real issues with ewbf on Linux though. It will randomly crash and require a hard reset. It also takes a few hard resets to get all of the cards at full throttle. I'm slowly switching my NVIDIA boxes over to Windows.

[fullzero]

Has anyone had luck getting the miner to run on GTX 1080 TI Founder's Edition?

This is my current configuration... Workers fail with no real error info...

Nvidia Driver: 381.22 (Ubuntu 16)
CUDA Version: 8.0.61

I'm using driver 378.13 on Ubuntu 16.04 server and headless with a 1080 Ti. It only uses as much memory as my 1080's so nearly half of the memory is unused. I suspect things could be massively improved on the card. I'm getting 650 sol/s on the card currently with stock settings.

I have real issues with ewbf on Linux though. It will randomly crash and require a hard reset. It also takes a few hard resets to get all of the cards at full throttle. I'm slowly switching my NVIDIA boxes over to Windows.

try nvOC 

[kopija]

Can somebody save me from experimentation please?
LYRA and Lyra2RE2. Do they differ from equihash regarding OC?
High core, low memory, low power limit?
How low/high?
I

[rednoW]

very mediocre result.
palit sjs 1070 can do 490sols@130w stable

How?!? How did you get such results? Please, show your frequencies!

PL 75% (I have 170watt old bios), core +149, mem +950 (samsung mem)  

[rednoW]

I put it down to 80% power and cant mind the overclock I did as just done it fast to check, was something like 70 on the core and 350 on the memory

80%PL is not 80watt. It is 136 watt if you use old 170watt bios or even more if you use latest 195watt bios

[desa]

Hi can somebody help me with my problem when I try to mine with 7 gtx 1070 my flypool miner wos crashed and didn't mine.

[nUm81]

Hi can somebody help me with my problem when I try to mine with 7 gtx 1070 my flypool miner wos crashed and didn't mine.

Error messages or screen shots?  Its hard to help with no info at all.

[desa]

I ll send when i have been at home

[nyongi]

Hi.
Can someone pls. share a good optimized settings for gtx 1060?
Or some indications to how to optimize.
Thanks.

That is my settings now:
http://i63.tinypic.com/1zmcrpe.jpg

[lexele]

Can somebody save me from experimentation please?
LYRA and Lyra2RE2. Do they differ from equihash regarding OC?
High core, low memory, low power limit?
How low/high?
I

I tried Lyra2RE2 the other day, it seems less bound to memory, I did not see much difference with stock mem and +800 in AB.

[desa]

I ll send when i have been at home

can you help what to do
CUDA: Device: 5 Thread exited with code: 4
CUDA: Device: 1 Thread exited with code: 4
CUDA: Device: 3 Thread exited with code: 4
CUDA: Device: 0 Thread exited with code: 4
CUDA: Device: 2 Thread exited with code: 4
CUDA: Device: 4 Thread exited with code: 4

[xyburcoin]

I ll send when i have been at home

can you help what to do
CUDA: Device: 5 Thread exited with code: 4
CUDA: Device: 1 Thread exited with code: 4
CUDA: Device: 3 Thread exited with code: 4
CUDA: Device: 0 Thread exited with code: 4
CUDA: Device: 2 Thread exited with code: 4
CUDA: Device: 4 Thread exited with code: 4

try lowering your core and memory frequencies...

[desa]

I ll send when i have been at home

can you help what to do
CUDA: Device: 5 Thread exited with code: 4
CUDA: Device: 1 Thread exited with code: 4
CUDA: Device: 3 Thread exited with code: 4
CUDA: Device: 0 Thread exited with code: 4
CUDA: Device: 2 Thread exited with code: 4
CUDA: Device: 4 Thread exited with code: 4

try lowering your core and memory frequencies...

it's dont working