zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 04, 2018, 10:02:53 PM |
|
Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock! No rejected shares so far. I will upload a new version very soon...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
proft
Newbie
Offline
Activity: 26
Merit: 0
|
|
January 04, 2018, 11:01:54 PM |
|
hello i see you have rx580 and you can get very high hash in cryptonight i have rx570 but i get only 650 hash how do you get that? tyvm sorry for my english valerio
Hi sorry, for late answer.. i am busy nowadays... All my cards are 8 GB ..And bioses are custom modded (I am modding them), but you can use , these bioses ,( they are also very good if you dont want edit manually ): https://anorak.tech/c/downloads Just register an account to download rom files.. (according to your card manufacturer (saphire,powercolor,msi etc) and memory module brand (samsung/elpida/micron etc) download the correct bios for 4 GB !! and after bios mod : with Gateless gate device-->cyptonight--> raw intensity : 512 - 640 (you have to test few values) , work size : 4 ? (I have 8 here , but u have 4 gb model) , gpu threads : 2 I hope it helps.. https://anorak.tech/t/sapphire-rx-570-pulse/5337memshift 1500 or 1750? Thanks. Memshift 1625 1700 2000. I have pulse ITX (one cooler).
|
|
|
|
goodb
Newbie
Offline
Activity: 126
Merit: 0
|
|
January 05, 2018, 12:08:30 AM |
|
try 1750 first, 1750 is safer , 1500 is more tight timings you are copying to higher frequency.. If 1750 brings some good improvement then you dont need 1500.
And last time I forget to mention : install amd 17.12.2 drivers , and from radeon--->gaming--global settings--change gpu workload to: compute ...and be sure it stays like that, even after restart.. This is very important..
Stop ! If it is not exactly your card, dont flash your card ! I would say more and more but here is Gateless Gate discussion topic.. You have to search and learn about bios modding little bit more.. Look this topic , you have everything to mod your bios : https://bitcointalk.org/index.php?topic=1954245.0 and your card is ITX (mini version) , I think it is normal to expect little bit less hash rate than big brothers..
|
|
|
|
UnclWish
|
|
January 05, 2018, 01:02:07 AM |
|
Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock! No rejected shares so far. I will upload a new version very soon...
Great! Thanks! We're wating. Meanwhile... can you say what can cause rejected low difficulty shares on Pitcairn GPU?
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
January 05, 2018, 01:04:00 AM |
|
Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock! No rejected shares so far. I will upload a new version very soon...
Great! Thanks! We're wating. Meanwhile... can you say what can cause rejected low difficulty shares on Pitcairn GPU? Nice ! I'll try it out as soon as it comes out. thanks for the hard work and the update.
|
|
|
|
UnclWish
|
|
January 05, 2018, 01:29:09 AM |
|
Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error. But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone! You're great developer you know?!
|
|
|
|
UnclWish
|
|
January 05, 2018, 01:41:36 AM |
|
Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock! No rejected shares so far. I will upload a new version very soon...
Wow, also a big improvement with the hashrate. From 1007 h/s with v1.1.13 to 1070 h/s with v1.1.14 THAT'S SURPASSING CLAYMORE!!!Also, "Copy to Similar Devices" great idea. What cards? Please more specific. On my 580 and 270 speed the same as in previous versions... P.S. zawawa, for 270X best intensity is 60 not 40. Please fix it.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 05, 2018, 01:45:19 AM |
|
Gateless Gate Sharp 1.1.14 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.1.14-alpha* Fixed critical bugs with CryptoNight. * Made numeric schemes for intensity more consistent. * Added features to make device settings easier. * Made user interface more responsive. * Improved the watchdog feature. * Various bug fixes and improvements. This is supposed to be the most stable release to date. I will let you guys decide...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
January 05, 2018, 01:55:31 AM Last edit: January 05, 2018, 02:06:50 AM by UnclWish |
|
Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock! No rejected shares so far. I will upload a new version very soon...
Wow, also a big improvement with the hashrate. From 1007 h/s with v1.1.13 to 1070 h/s with v1.1.14 THAT'S SURPASSING CLAYMORE!!!Also, "Copy to Similar Devices" great idea. What cards? Please more specific. On my 580 and 270 speed the same as in previous versions... P.S. zawawa, for 270X best intensity is 60 not 40. Please fix it. MSI Radeon RX580 8GB Gaming X - bios modded, driver version 17.12.2 I have this card too. But i have only 860 h/s on it. What clocks you're use and what bios mod? Mamory hynix or samsung?
|
|
|
|
UnclWish
|
|
January 05, 2018, 01:59:29 AM |
|
Gateless Gate Sharp 1.1.14 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.1.14-alpha* Fixed critical bugs with CryptoNight. * Made numeric schemes for intensity more consistent. * Added features to make device settings easier. * Made user interface more responsive. * Improved the watchdog feature. * Various bug fixes and improvements. This is supposed to be the most stable release to date. I will let you guys decide... Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error. But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone! You're great developer you know?!
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 05, 2018, 02:03:40 AM |
|
Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error. But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone! You're great developer you know?!
Oh, that "bug" is by design. Like you said, the miner has to be restarted everytime a new value is set for intensity for CryptoNight. I had to use all sorts of dirty tricks to make the miner stable. I don't know about my greatness, but I am definitely more persistent than most developers.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
January 05, 2018, 02:06:16 AM |
|
Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error. But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone! You're great developer you know?!
Oh, that "bug" is by design. Like you said, the miner has to be restarted everytime a new value is set for intensity for CryptoNight. I had to use all sorts of dirty tricks to make the miner stable. I don't know about my greatness, but I am definitely more persistent than most developers. Hmmm, I think that you must make button "Apply" that will be restart GGS or something like this. Cryptonight became more stable - it's the fact! And in next version please fix default intensity for cryptonight on 270X it 60 the best not 40. P.S. GGS Monitor didn't restart GGS after error with changing intensity. It must do that?
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 05, 2018, 02:21:05 AM |
|
Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error. But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone! You're great developer you know?!
Oh, that "bug" is by design. Like you said, the miner has to be restarted everytime a new value is set for intensity for CryptoNight. I had to use all sorts of dirty tricks to make the miner stable. I don't know about my greatness, but I am definitely more persistent than most developers. Hmmm, I think that you must make button "Apply" that will be restart GGS or something like this. Cryptonight became more stable - it's the fact! And in next version please fix default intensity for cryptonight on 270X it 60 the best not 40. P.S. GGS Monitor didn't restart GGS after error with changing intensity. It must do that? It does on my PC's. In fact, there shouldn't be an error message. Can I see a screenshot of of the error message?
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
proft
Newbie
Offline
Activity: 26
Merit: 0
|
|
January 05, 2018, 04:51:01 AM |
|
try 1750 first, 1750 is safer , 1500 is more tight timings you are copying to higher frequency.. If 1750 brings some good improvement then you dont need 1500.
And last time I forget to mention : install amd 17.12.2 drivers , and from radeon--->gaming--global settings--change gpu workload to: compute ...and be sure it stays like that, even after restart.. This is very important..
Stop ! If it is not exactly your card, dont flash your card ! I would say more and more but here is Gateless Gate discussion topic.. You have to search and learn about bios modding little bit more.. Look this topic , you have everything to mod your bios : https://bitcointalk.org/index.php?topic=1954245.0 and your card is ITX (mini version) , I think it is normal to expect little bit less hash rate than big brothers.. Maybe... But. I see video youtube how guy mode this VC and have 860-900 h/s. I try... Use him timing...drivers 11.17.1. Use blockchain drivers.... Max 750-760.... I save bios CPU-Z, and change timing with SRBPolarisV3-2-Int...Maybe i must change programm for change timing?
|
|
|
|
QuirkSilver
Member
Offline
Activity: 80
Merit: 13
|
|
January 05, 2018, 05:00:35 AM |
|
Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock! No rejected shares so far. I will upload a new version very soon...
Wow, also a big improvement with the hashrate. From 1007 h/s with v1.1.13 to 1070 h/s with v1.1.14 THAT'S SURPASSING CLAYMORE!!!Also, "Copy to Similar Devices" great idea. What cards? Please more specific. On my 580 and 270 speed the same as in previous versions... P.S. zawawa, for 270X best intensity is 60 not 40. Please fix it. MSI Radeon RX580 8GB Gaming X - bios modded, driver version 17.12.2 I have this card too. But i have only 860 h/s on it. What clocks you're use and what bios mod? Mamory hynix or samsung? Probably the garbage hynix MJR crap right? short answer is : 1536*8*2 and you have to get that custom GDDR5 strap from the thread here.... Not the Good hynix strap from polaris 1.6.3 editor. memory won't give you errors in HW info, clock it to 2000 default and know that 2100mhz is near the blue screen threshold :-) but yes, it gives slightly higher hashes around 905 h/s with old GG (and new afaik)
|
|
|
|
minerbaba
Newbie
Offline
Activity: 91
Merit: 0
|
|
January 05, 2018, 07:34:33 AM |
|
neoscrypt miner stopped working after sometime
Exception in Stratum.StreamReaderThread(): System.IO.IOException: Unable to read data from the transport connection: An established connection was aborted by the software in your host machine. ---> System.Net.Sockets.SocketException: An established connection was aborted by the software in your host machine at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) --- End of inner exception stack trace --- at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.IO.StreamReader.ReadBuffer() at System.IO.StreamReader.ReadLine() at GatelessGateSharp.Stratum.StreamReaderThread()
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 05, 2018, 08:54:37 AM |
|
neoscrypt miner stopped working after sometime
Exception in Stratum.StreamReaderThread(): System.IO.IOException: Unable to read data from the transport connection: An established connection was aborted by the software in your host machine. ---> System.Net.Sockets.SocketException: An established connection was aborted by the software in your host machine at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) --- End of inner exception stack trace --- at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.IO.StreamReader.ReadBuffer() at System.IO.StreamReader.ReadLine() at GatelessGateSharp.Stratum.StreamReaderThread()
This is a pool issue: https://stackoverflow.com/questions/31931438/c-sharp-an-established-connection-was-aborted-by-the-software-in-your-host-macWhich pool are you using?
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
January 05, 2018, 09:32:43 AM |
|
Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock! No rejected shares so far. I will upload a new version very soon...
Wow, also a big improvement with the hashrate. From 1007 h/s with v1.1.13 to 1070 h/s with v1.1.14 THAT'S SURPASSING CLAYMORE!!!Also, "Copy to Similar Devices" great idea. What cards? Please more specific. On my 580 and 270 speed the same as in previous versions... P.S. zawawa, for 270X best intensity is 60 not 40. Please fix it. MSI Radeon RX580 8GB Gaming X - bios modded, driver version 17.12.2 I have this card too. But i have only 860 h/s on it. What clocks you're use and what bios mod? Mamory hynix or samsung? Here are my memory straps: UberMix 2.3 1:1500 and up 777000000000000022CC1C00AD615B41C0570E152DCB7409006007000B031420FA8900A00300000 010123A46DB354019 Good HYNIX_2 2:1500 and up 777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17 no OC, never got any stable settings and with the latest driver it is a pain to test. Waiting for Zawawa with a great solution Your card with samsung memory, thats why it gives above 1k h/s. It's ubermix straps do. Hynix memory with strap you wrote can't do that.
|
|
|
|
UnclWish
|
|
January 05, 2018, 09:36:27 AM Last edit: January 05, 2018, 10:00:57 AM by UnclWish |
|
Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error. But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone! You're great developer you know?!
Oh, that "bug" is by design. Like you said, the miner has to be restarted everytime a new value is set for intensity for CryptoNight. I had to use all sorts of dirty tricks to make the miner stable. I don't know about my greatness, but I am definitely more persistent than most developers. Hmmm, I think that you must make button "Apply" that will be restart GGS or something like this. Cryptonight became more stable - it's the fact! And in next version please fix default intensity for cryptonight on 270X it 60 the best not 40. P.S. GGS Monitor didn't restart GGS after error with changing intensity. It must do that? It does on my PC's. In fact, there shouldn't be an error message. Can I see a screenshot of of the error message? From event viewer: - System - Provider [ Name] Application Error - EventID 1000 [ Qualifiers] 0 Level 2 Task 100 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2018-01-05T01:21:14.044199200Z EventRecordID 33130 Channel Application Computer WishMaster Security - EventData GatelessGateSharp.exe 1.1.14.0 5a4ed03d amdocl64.dll 23.20.15007.1005 5a36cb81 c0000409 0000000002079595 3370 01d385c3225aa268 E:\MinerControlAMD\GGS\GatelessGateSharp.exe C:\WINDOWS\System32\DriverStore\FileRepository\c0322096.inf_amd64_7ff7d53c3793b9e4\amdocl64.dll 16b81c47-320a-4b96-884f-200012ac63c9
|
|
|
|
minerbaba
Newbie
Offline
Activity: 91
Merit: 0
|
|
January 05, 2018, 10:51:25 AM Last edit: January 05, 2018, 11:36:56 AM by minerbaba |
|
neoscrypt miner stopped working after sometime
Exception in Stratum.StreamReaderThread(): System.IO.IOException: Unable to read data from the transport connection: An established connection was aborted by the software in your host machine. ---> System.Net.Sockets.SocketException: An established connection was aborted by the software in your host machine at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) --- End of inner exception stack trace --- at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.IO.StreamReader.ReadBuffer() at System.IO.StreamReader.ReadLine() at GatelessGateSharp.Stratum.StreamReaderThread()
This is a pool issue: https://stackoverflow.com/questions/31931438/c-sharp-an-established-connection-was-aborted-by-the-software-in-your-host-macWhich pool are you using? https://altminer.net/and http://bsod.pw/Log https://drive.google.com/file/d/1cgVGf26uVIUiQF5SMfqo4s_98GBortDv/view
|
|
|
|
|