▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[sundownz]

Nemosminer been mining bitcore overnight now and haven’t found a block yet.  It is reported as being the most profitable algo to mine by zpool.

 Also, one rig is mining at 77 MH and the other is 55 MH.  However, the web portal is reporting only 1 MH for both rigs.  It was like that before I went to bed, and now in the morning as well.

What’s happening?

I noticed that if I used "actual" profit with NEMO it would stick on algos for a long time with zero reward.

I switched my machines to "estimated" profit -- the newest distro of NEMO has two different .BAT files depending on which you want to do.

[minestro]

Hey guys there must be something broken on your end, regarding bitcore. I just realized one of my cards mined since yesterday bitcore with about 30 MH/s, only show as 2.3 MH/s on your end and that for hours. That would also explain the overall low hashrate of your pool regarding bitcore.

BTW great job, I just flushed 18h of mining down the drain for nothing.

[guytechie]

Hey guys there must be something broken on your end, regarding bitcore. I just realized one of my cards mined since yesterday bitcore with about 30 MH/s, only show as 2.3 MH/s on your end and that for hours. That would also explain the overall low hashrate of your pool regarding bitcore.

BTW great job, I just flushed 18h of mining down the drain for nothing.

Same here, except mine is reported to be 1.5 MH, then this morning 1 MH, even though I am mining at 77 MH and another rig at 40 MH.

[STSMiner]

I had problems with Nemos Miner and now use Awesome Miner instead, it has a better GUI and more control with the miners.


http://www.awesomeminer.com/default.aspx

https://bitcointalk.org/index.php?topic=676942.0

[STSMiner]

ANNOUNCEMENT:

MAJOR WALLET UPGRADE:
V3.0.0 will be released on MONDAY, NOVEMBER 6TH.
Protocol version 69110 being upgraded to 69200.
Anyone still using a wallet version older than V3.0.0 will be unable to sync with the network.

https://bitcointalk.org/index.php?topic=2254046.msg24071616#msg24071616

[AmodeusLex]

What is minimal withdraw on zpool?

[SFR10]

What is minimal withdraw on zpool?

As stated on the homepage (2nd line from the top):

Payouts are made automatically every 2 hours for all balances above 0.0075 and balances more than 0.0015 are paid on Sunday. DCR requires min of 0.025 before payout will occur.

[dobcrypto]

Uuu... here del posts about pool fees.
Great.

And i'm too not understand, what fee pool take from me?
2+5=7% fee?

[STSMiner]

Crackfoo,

Please give your BTC wallet a kick !

Payout stalled again.

46m ago     0.00227227   ...

[JaredKaragen]

Crackfoo,

Please give your BTC wallet a kick !

Payout stalled again.

46m ago     0.00227227   ...

Look at how well the blockchain is moving... and diff....

This is the new and improved BTC apparently....

[ca1987]

What is blowing up on SHA256? Showing .27 current and .7 24 hour actual? Is this an error? Highest I see on whattomine and coinwarz is BitcoinCash and it is .19 right now.

[dotdvd]

pool down?

-- back online --

little glitch...

[guytechie]

What’s going on here?

   Verge (blake2s)   3.500722 XVG   0.224%   0.00385362   8w ago   Immature (64827/140)
   Verge (blake2s)   2.013900 XVG   0.129%   0.00221692   8w ago   Immature (64828/140)
   Verge (blake2s)   3.995147 XVG   0.256%   0.00439789   8w ago   Immature (64922/140)

[crackfoo]

pool down?

-- back online --

little glitch...

my newer coin box crashed again. I've ordered a new one as I can't be bothered to log support issues. It's quicker to replace.

[STSMiner]

Crackfoo,

Can you update the PHI (LUX) wallet your end ?

Version 3 is out and you have 2.2.4.0 running which will not sync anymore.

[crackfoo]

Crackfoo,

Can you update the PHI (LUX) wallet your end ?

Version 3 is out and you have 2.2.4.0 running which will not sync anymore.

updated.

Thanks

[Hellracer]

Somebody help me!
Have an Antminer D3 19.3 ghs x11.
Wants to leave it on arctic coin mining.

I don't understand the inputs from the pool.
What do I have to do with
URL: stratum+tcp: //x11. mine. zpool. ca: 3533#xnsub
User: (I need a BTC Wallet or an arctic coin wallet)

Password:


Ask for help.
I want the arctic coin directly mine it my arctic wallet what do I have to type there everything.

or do any of you know a better coin to mine?

[jebidia]

Hi All,

This is probably one of the more ridiculous questions that get asked on here...I apologize in advance.

I got the equihash zpool miner running nicely with my 4 x 1080 ti setup on ccminer but I see in the "miners" section on the zpool site that EWBF is the most commonly used miner for equihash and that is the one I've found I prefer but I can't seem to get it fired up with zpool.

I've used it on supernova pools successfully so I'm was just replacing things in hopes it would work...here's where I am.  I must be close!  I found that d=45 was a pretty good place for ccminer but I'm not sure how that translates...and obviously I replace <BTC ADDY> with my BTC ADDY...



miner.exe --server equihash.mine.zpool.ca --user <BTC ADDY> --pass d=45 c=BTC --port 2142  --cuda_devices 0 1 2 3

[Novos]

Somebody help me!
Have an Antminer D3 19.3 ghs x11.
Wants to leave it on arctic coin mining.

I don't understand the inputs from the pool.
What do I have to do with
URL: stratum+tcp: //x11. mine. zpool. ca: 3533#xnsub
User: (I need a BTC Wallet or an arctic coin wallet)

Password:


Ask for help.
I want the arctic coin directly mine it my arctic wallet what do I have to type there everything.

or do any of you know a better coin to mine?

Please answer me too, same question about setup D3. And multipool can auto-convert coin to BTC exchange?

[dobcrypto]

D3 has it's own fields, just put host in host, BTC address in worker and password as c=BTC.
URL: stratum+tcp://x11.mine.zpool.ca:3533#xnsub
User: your BTC address
Password: c=BTC