laudi1011
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 13, 2017, 03:02:45 AM |
|
Hi Nemo, thank you for your answer. This configuration that advises me is the maximum for stable major profit or can I upload some more parameters? Again thanks! Andrew Colombia
|
|
|
|
laudi1011
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 13, 2017, 03:13:22 AM |
|
Another question Nemo I am putting together another ring with Nvidia 1080 / 8g-ram with 6 cards. Your advice also on setting up for the best performance good work Nemo! Sorry for these questions I was used to working with AMD R9 390 before! And again thank you! Andrew Colombia.
|
|
|
|
cinderz45
Newbie
Offline
Activity: 23
Merit: 0
|
|
July 13, 2017, 03:16:57 AM |
|
hi At that time I have an OC in test of 80 power limit, +84 core clock +236 memory clock but it seems temp 60 degrees but I would like to raise more profit if it is possible. Thanks for your answer win 10 no problem for temp or power expenditure
Hi Andrew I would suggest 100 power limit and +0 memory clock. For core clock you need overclock + undervolt. If you use MSI Afterburner: press "CTRL + F" and you can set voltage curves. You will see screen similar to what you see here: http://www.overclock.net/t/1623986/help-understanding-voltage-frequency-curve-editor-in-msi-afterburnerOn my 1080 Ti I prefer ~911-925 mV 1911-1923 MHz You need to fine-tune and adjust, if get black screen, wait a few seconds, card settings will reset. For your regular 1080 cards, search online for best voltage curve.
|
|
|
|
universalresonance
|
|
July 13, 2017, 05:01:06 PM |
|
Guys seriously any way to make this miner non-intrusive.
Every time it changes to a different miner or something else, it blocks whatever is going on the screen , I want it to keep running in the background without interfering with my full screen videos or w/e I'm doing.
Right now, I have to keep minimizing it.
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
July 13, 2017, 08:51:12 PM |
|
Guys seriously any way to make this miner non-intrusive.
Every time it changes to a different miner or something else, it blocks whatever is going on the screen , I want it to keep running in the background without interfering with my full screen videos or w/e I'm doing.
Right now, I have to keep minimizing it.
Guys seriously don't mine on your pc while you watching your important videos then.. build a htpc and have your mining rigs separate... im not changing anything.. i don't care about your Videos
|
NemosMiner-v3.8.1.3
|
|
|
cashen
|
|
July 13, 2017, 10:37:07 PM |
|
Guys seriously any way to make this miner non-intrusive.
Every time it changes to a different miner or something else, it blocks whatever is going on the screen , I want it to keep running in the background without interfering with my full screen videos or w/e I'm doing.
Right now, I have to keep minimizing it.
Guys seriously don't mine on your pc while you watching your important videos then.. build a htpc and have your mining rigs separate... im not changing anything.. i don't care about your Videos I agree, I think it is good the way it is.
|
|
|
|
allalone3385
Newbie
Offline
Activity: 28
Merit: 0
|
|
July 13, 2017, 10:41:02 PM |
|
i have a rig with 4 gtx1070 and it keeps saying non-existant CUDA device #3 specified in -d 0
no starting
|
|
|
|
JaredKaragen
Legendary
Offline
Activity: 1848
Merit: 1165
My AR-15 ID's itself as a toaster. Want breakfast?
|
|
July 14, 2017, 01:04:04 AM |
|
Guys seriously any way to make this miner non-intrusive.
Every time it changes to a different miner or something else, it blocks whatever is going on the screen , I want it to keep running in the background without interfering with my full screen videos or w/e I'm doing.
Right now, I have to keep minimizing it.
view the link in my sig about a batch. Read all of it and understand what they are and what they do. You have the ability to handle it with those resources if you choose; if you think nemosminer is not working the way you want. -JK
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
July 14, 2017, 02:03:45 AM |
|
When I use neosminer .. the miner keeps jumping to different algos for most of the time, I dont know what exactly is happening but I reduced the batch file down to only 4 algo to stop it from boucing
|
|
|
|
laudi1011
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 14, 2017, 04:42:57 AM |
|
Thanks Nemo I will from OC as you advise. 6x 1080 ti zpool after 24 hours +/- 37 $ directly in my xapo account. . The same ring in zcash 24, hours using claymore +/- 23 $ very well Nemo!. a Not good thing .... I can not use my 54 amd cards!
|
|
|
|
pikachuy
|
|
July 14, 2017, 07:39:56 AM |
|
Thanks Nemo I will from OC as you advise. 6x 1080 ti zpool after 24 hours +/- 37 $ directly in my xapo account. . The same ring in zcash 24, hours using claymore +/- 23 $ very well Nemo!. a Not good thing .... I can not use my 54 amd cards! Claymore doesn't support zcash for Nvidia, so how is it same rig/ring???
|
|
|
|
dragonmike
|
|
July 14, 2017, 12:28:53 PM |
|
Nemo, you've included a Cuda8 version of Alexis' miner, but haven't enabled any by default. Have you by any chance checked which algos Alexis performs better on in Cuda 8?
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2828
Merit: 1091
--- ChainWorks Industries ---
|
|
July 14, 2017, 12:40:51 PM |
|
Nemo, you've included a Cuda8 version of Alexis' miner, but haven't enabled any by default. Have you by any chance checked which algos Alexis performs better on in Cuda 8?
some algos do - some algos dont ... overall - ccminer-alexis78 public miner performs a little under than the compiled one under cuda75 ... the reason is because its 'tuned' for cuda75 - not cuda80 ... #crysx
|
|
|
|
universalresonance
|
|
July 14, 2017, 03:38:18 PM |
|
Guys seriously any way to make this miner non-intrusive.
Every time it changes to a different miner or something else, it blocks whatever is going on the screen , I want it to keep running in the background without interfering with my full screen videos or w/e I'm doing.
Right now, I have to keep minimizing it.
Guys seriously don't mine on your pc while you watching your important videos then.. build a htpc and have your mining rigs separate... im not changing anything.. i don't care about your Videos lol sure, I'll get right on it. Man don't be so fragile, I was just inquiring if I was doing something wrong or if I personally could do something that would prevent it from jumping in front of other already opened windows. Like some sort of settings I could temper with myself. I didn't complain about the miner- that works good and I appreciate your work and you sharing it with us. Thanks.
|
|
|
|
MikeyJo
Newbie
Offline
Activity: 26
Merit: 0
|
|
July 14, 2017, 04:31:17 PM |
|
i have a rig with 4 gtx1070 and it keeps saying non-existant CUDA device #3 specified in -d 0
no starting
Check your PSU i had that and my PSU wasnt putting out enough
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
July 14, 2017, 08:47:02 PM |
|
i have a rig with 4 gtx1070 and it keeps saying non-existant CUDA device #3 specified in -d 0
no starting
Check your PSU i had that and my PSU wasnt putting out enough something is wrong with your : CUDA device #3 specified in -d 0 you need to fix it Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
July 14, 2017, 09:25:09 PM |
|
Nemo, you've included a Cuda8 version of Alexis' miner, but haven't enabled any by default. Have you by any chance checked which algos Alexis performs better on in Cuda 8?
some algos do - some algos dont ... overall - ccminer-alexis78 public miner performs a little under than the compiled one under cuda75 ... the reason is because its 'tuned' for cuda75 - not cuda80 ... #crysx yeh 7.5 is better in most cases
|
NemosMiner-v3.8.1.3
|
|
|
Storx
|
|
July 14, 2017, 10:38:15 PM |
|
Nemo, you've included a Cuda8 version of Alexis' miner, but haven't enabled any by default. Have you by any chance checked which algos Alexis performs better on in Cuda 8?
some algos do - some algos dont ... overall - ccminer-alexis78 public miner performs a little under than the compiled one under cuda75 ... the reason is because its 'tuned' for cuda75 - not cuda80 ... #crysx yeh 7.5 is better in most cases Here is my latest benchmarks on 2 brand new EVGA SC2 1080ti's i placed into service... 65% tdp 60c +150 +500 Auto
|
- GPUs Mining : 128 (Updated 3/7/18) // CPUs Mining : 19 (Updated 2/23/18)
|
|
|
laudi1011
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 15, 2017, 07:06:36 AM |
|
Nemo excuse claymore zcash 12.5 I'm using it in my rings of r9 390 s. I was talking about zec miner 0.3.3 b greetings Andrew
|
|
|
|
drnkk
Member
Offline
Activity: 72
Merit: 10
|
|
July 15, 2017, 10:42:03 AM Last edit: July 15, 2017, 08:09:46 PM by drnkk |
|
Is there a way to define another coin for payout by editing start.bat only.
edit: I figured it out, - I added -Currency XVG to start.bat and replaced -Wallet for XVG - I edited a line for password at the below of the code of zpool.ps1 Pass = "$WorkerName,c=$Currency"
I am not sure if it is profitable but I will try this way for some time
|
Bitrated user: drnk.
|
|
|
|