[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[papampi]

is Zpool rates working fine ?
I'm getting weird rates for past hour
Are these possible

Code:

   Type: NVIDIA

Miner           Algorithm            Speed      BTC/Day BTC/GH/Day Pool
-----           ---------            -----      ------- ---------- ----
ccminerAlexis78 Quark          177.64 MH/s      0.32611    1.83582 Zpool-
CcminerTpruvot  Quark          123.07 MH/s      0.22593    1.83582 Zpool-
CcminerTpruvot  Qubit           84.02 MH/s      0.17421    2.07345 Zpool-
CcminerKlaust   MyriadGroestl  414.21 MH/s      0.00275    0.00664 Zpool-
CcminerTpruvot  Skunk          150.73 MH/s      0.00237    0.01573 Zpool-

0.3 bitcoin a day with 6x1070

[minerx117]

hahah yeh i seen qubit going hard 2day so i also enabled it for a few hours but No something is wrong with qubit pricing atm... let Crackfoo no over on Zpool thread

[jimmykl]

is Zpool rates working fine ?
I'm getting weird rates for past hour
Are these possible

Code:

   Type: NVIDIA

Miner           Algorithm            Speed      BTC/Day BTC/GH/Day Pool
-----           ---------            -----      ------- ---------- ----
ccminerAlexis78 Quark          177.64 MH/s      0.32611    1.83582 Zpool-
CcminerTpruvot  Quark          123.07 MH/s      0.22593    1.83582 Zpool-
CcminerTpruvot  Qubit           84.02 MH/s      0.17421    2.07345 Zpool-
CcminerKlaust   MyriadGroestl  414.21 MH/s      0.00275    0.00664 Zpool-
CcminerTpruvot  Skunk          150.73 MH/s      0.00237    0.01573 Zpool-

0.3 bitcoin a day with 6x1070

That'd be nice! Something must be up with your setup? Here's my current top for 7x1070:

Code:

Miner           Algorithm           Speed BTC/Day BTC/GH/Day Pool
-----           ---------           ----- ------- ---------- ----
CcminerSp-mod   Skein           3.39 GH/s 0.00407    0.00120 Zpool-
CcminerTpruvot  Bitcore       104.48 MH/s 0.00341    0.03265 Zpool-
ccminerAlexis78 MyriadGroestl 438.59 MH/s 0.00324    0.00739 Zpool-
CcminerKlaust   MyriadGroestl 436.04 MH/s 0.00322    0.00739 Zpool-
ccminerAlexis78 NeoScrypt       7.17 MH/s 0.00320    0.44606 Zpool-

Maybe try resetting stats and benchmarking again?

[minerx117]

is Zpool rates working fine ?
I'm getting weird rates for past hour
Are these possible

Code:

   Type: NVIDIA

Miner           Algorithm            Speed      BTC/Day BTC/GH/Day Pool
-----           ---------            -----      ------- ---------- ----
ccminerAlexis78 Quark          177.64 MH/s      0.32611    1.83582 Zpool-
CcminerTpruvot  Quark          123.07 MH/s      0.22593    1.83582 Zpool-
CcminerTpruvot  Qubit           84.02 MH/s      0.17421    2.07345 Zpool-
CcminerKlaust   MyriadGroestl  414.21 MH/s      0.00275    0.00664 Zpool-
CcminerTpruvot  Skunk          150.73 MH/s      0.00237    0.01573 Zpool-

0.3 bitcoin a day with 6x1070

i didn't test quark tho testing now i know qubit is broken....

[papampi]

lol ... its really goin crazy

Code:

   Type: NVIDIA

Miner             Algorithm           Speed BTC/Day BTC/GH/Day Pool
-----             ---------           ----- ------- ---------- ----
ccminerAlexis78   Quark         177.73 MH/s 0.72753    4.09340 Zpool-
ccminerAlexis78   Qubit         172.46 MH/s 0.64645    3.74846 Zpool-
CcminerTpruvot    Qubit         121.15 MH/s 0.45413    3.74846 Zpool-
ccminerAlexis78   X11            72.18 MH/s 0.20790    2.88029 Zpool-
CcminerTpruvot    X11            38.27 MH/s 0.11024    2.88029 Zpool-
CcminerTpruvot    hmq1725        27.40 MH/s 0.01604    0.58541 Zpool-

[papampi]

i didn't test quark tho testing now i know qubit is broken....

I think Quark, Qubit and X11 are having problem on Zpool now.

[sreg0r]

Pretty sure those algos are off by a a factor of one thousand.  Real BTC/Day would be  0.00072753

lol ... its really goin crazy

Code:

   Type: NVIDIA

Miner             Algorithm           Speed BTC/Day BTC/GH/Day Pool
-----             ---------           ----- ------- ---------- ----
ccminerAlexis78   Quark         177.73 MH/s 0.72753    4.09340 Zpool-
ccminerAlexis78   Qubit         172.46 MH/s 0.64645    3.74846 Zpool-
CcminerTpruvot    Qubit         121.15 MH/s 0.45413    3.74846 Zpool-
ccminerAlexis78   X11            72.18 MH/s 0.20790    2.88029 Zpool-
CcminerTpruvot    X11            38.27 MH/s 0.11024    2.88029 Zpool-
CcminerTpruvot    hmq1725        27.40 MH/s 0.01604    0.58541 Zpool-

[papampi]

Seems like all auto switch pools getting wierd problems one by one
First MiningPoolHub started to not update rating api in the 3 minutes and the update time goes as high as 30 min
Now Zpool giving wrong rates

[crackfoo]

I've changed the following algos to GH instead of MH/BTC/Day:

x11, quark, qubit so there's probably some changes that need to be done to account for that.

Cheers

[Doncarlos74]

1. is there any better way how to set parameters (select cards, intensity, api, etc.) then editing ps files on miner dir?
2. is it possible to set intensity for each algo? default intensity is just wasting with hashpower.
Speaking about 2.1 zpool version

Thx.

[Nebiforever]

It all comes down to two strategies.
Either you use profit switching solution that pays in bitcoin, or you mine the coin and sell it yourself on exchange.
The third solution is called "no guts, no glory" way: you mine a low difficulty coin and hold it, hoping that the pump will come and you will be able to sell for maximum profitability.
Mining has become a major PITA.

we are talking under the topic of profit switching software so the aim is to find best solution for "profit switching that pays in bitcoin"

for the last couple of weeks, as far as i observe the gpu mining with profit switching, for these pools (zpool, mph etc) you gain the half of what you plan (average) to gain.

i dont know about medium/big hash rate miners (5-6 rigs and more, but would be great if they tell us their experiences about the last couple of weeks) but from my side (2 rigs with mix of gtx 1070/1080) with using profit switching pools, i can not even get close to what i gain with nicehash atm. and belive me i do really hate nice hash but i dont have enough time to mine coins and exchange by myself. we are here because we want to have the best automated profit switching solution.

i have a good  feeling about new average profit mode of nemosminer is trying to implement. cant wait to try it out

but for now, i'll be sticking with something else (you know what i mean )

[dragonmike]

It all comes down to two strategies.
Either you use profit switching solution that pays in bitcoin, or you mine the coin and sell it yourself on exchange.
The third solution is called "no guts, no glory" way: you mine a low difficulty coin and hold it, hoping that the pump will come and you will be able to sell for maximum profitability.
Mining has become a major PITA.

we are talking under the topic of profit switching software so the aim is to find best solution for "profit switching that pays in bitcoin"

for the last couple of weeks, as far as i observe the gpu mining with profit switching, for these pools (zpool, mph etc) you gain the half of what you plan (average) to gain.

i dont know about medium/big hash rate miners (5-6 rigs and more, but would be great if they tell us their experiences about the last couple of weeks) but from my side (2 rigs with mix of gtx 1070/1080) with using profit switching pools, i can not even get close to what i gain with nicehash atm. and belive me i do really hate nice hash but i dont have enough time to mine coins and exchange by myself. we are here because we want to have the best automated profit switching solution.

i have a good  feeling about new average profit mode of nemosminer is trying to implement. cant wait to try it out

but for now, i'll be sticking with something else (you know what i mean )

Yup.
I've been mining Skunkhash all week after I realized that Nemosminer earned me less than half I would make by mining a single coin directly. Looking forward to the averaging version too.

[papampi]

If any wants to have less frequent switch you should change DecayBase in the main miner.ps1 (nemosminer.ps1, multiminer.ps1,....)

from:

Code:

$DecayBase = 1 - 0.1 

to:

Code:

$DecayBase = 1 - 0.01 

Quote from @aaronsace  of multiminer on github:

It's the percentage that it decreases the switching threshold. It will switch less and when it does they are more likely to be stable coins compared to just increasing the interval.

But keep in mind, Dont set sync interval high, Zpool updates the api around 3 minutes, so keep yours below that.
I set mine to 120 sec.
You might feel weird at first when seeing a coin goes to top and no switch, but I think its better this way.

[minerx117]

If any wants to have less frequent switch you should change DecayBase in the main miner.ps1 (nemosminer.ps1, multiminer.ps1,....)

from:

Code:

$DecayBase = 1 - 0.1 

to:

Code:

$DecayBase = 1 - 0.01 

Quote from @aaronsace  of multiminer on github:

It's the percentage that it decreases the switching threshold. It will switch less and when it does they are more likely to be stable coins compared to just increasing the interval.

But keep in mind, Dont set sync interval high, Zpool updates the api around 3 minutes, so keep yours below that.
I set mine to 120 sec.
You might feel weird at first when seeing a coin goes to top and no switch, but I think its better this way.

thankyou

[Nebiforever]

If any wants to have less frequent switch you should change DecayBase in the main miner.ps1 (nemosminer.ps1, multiminer.ps1,....)

from:

Code:

$DecayBase = 1 - 0.1 

to:

Code:

$DecayBase = 1 - 0.01 

Quote from @aaronsace  of multiminer on github:

It's the percentage that it decreases the switching threshold. It will switch less and when it does they are more likely to be stable coins compared to just increasing the interval.

But keep in mind, Dont set sync interval high, Zpool updates the api around 3 minutes, so keep yours below that.
I set mine to 120 sec.
You might feel weird at first when seeing a coin goes to top and no switch, but I think its better this way.

yes i've read that too, and also tried those settings but i cant say real profit changed alot. though i didnt have chance to test it long enough because the pool live profit apis wasnt working fine for the last 2-3 days (zpool, mph)

[dragonmike]

Nemo, you testing your averaging miner?
How does it fare? Releasing it soon?

[mforce]

is Zpool rates working fine ?
I'm getting weird rates for past hour
Are these possible

Code:

   Type: NVIDIA

Miner           Algorithm            Speed      BTC/Day BTC/GH/Day Pool
-----           ---------            -----      ------- ---------- ----
ccminerAlexis78 Quark          177.64 MH/s      0.32611    1.83582 Zpool-
CcminerTpruvot  Quark          123.07 MH/s      0.22593    1.83582 Zpool-
CcminerTpruvot  Qubit           84.02 MH/s      0.17421    2.07345 Zpool-
CcminerKlaust   MyriadGroestl  414.21 MH/s      0.00275    0.00664 Zpool-
CcminerTpruvot  Skunk          150.73 MH/s      0.00237    0.01573 Zpool-

0.3 bitcoin a day with 6x1070

i didn't test quark tho testing now i know qubit is broken....

when was quark added?

Is not on my Alghoritms.txt

[saul.goodman]

Is there a way to change the api ports? ..in the ps1 files?
Would like to run 2 instances (0,1,2 + 3,4,5) without messing up the benchmarks/hashrates.

Ccminer needs much too long to startup more then 3 cards.

Btw
Thank you so much for adding hashrefinery and nicehash

This would be nice also:
NemosMiner-v2.1.ps1

Code:

     [Parameter(Mandatory=$false)]
    [Array]$Currency = ("EUR"), #i.e. GBP,EUR,ZEC,ETH ect.
    [Parameter(Mandatory=$false)]
    [Array]$Passwordcurrency = ("BTC"), #i.e. BTC,LTC,ZEC,ETH ect.

    $Rates = [PSCustomObject]@{}
    $Currency | ForEach {$Rates | Add-Member $_ (Invoke-WebRequest "https://api.cryptonator.com/api/ticker/btc-$_" -UseBasicParsing | ConvertFrom-Json).ticker.price}


    #Display mining information
    Clear-Host
    Write-Host "1BTC = " $Rates.$Currency "$Currency"
    $Miners | Where {$_.Profit -ge 1E-5 -or $_.Profit -eq $null} | Sort -Descending Type,Profit | Format-Table -GroupBy Type (
        @{Label = "Miner"; Expression={$_.Name}}, 
        @{Label = "Algorithm"; Expression={$_.HashRates.PSObject.Properties.Name}}, 
        @{Label = "Speed"; Expression={$_.HashRates.PSObject.Properties.Value | ForEach {if($_ -ne $null){"$($_ | ConvertTo-Hash)/s"}else{"Benchmarking"}}}; Align='right'}, 
        @{Label = "BTC/Day"; Expression={$_.Profits.PSObject.Properties.Value | ForEach {if($_ -ne $null){$_.ToString("N5")}else{"Benchmarking"}}}; Align='right'}, 
        @{Label = "$Currency/Day"; Expression={$_.Profits.PSObject.Properties.Value | ForEach {if($_ -ne $null){($_ * $Rates.$Currency).ToString("N3")}else{"Benchmarking"}}}; Align='right'}, 
        @{Label = "BTC/GH/Day"; Expression={$_.Pools.PSObject.Properties.Value.Price | ForEach {($_*1000000000).ToString("N5")}}; Align='right'}, 
        @{Label = "Pool"; Expression={$_.Pools.PSObject.Properties.Value | ForEach {"$($_.Name)-$($_.Info)"}}}
    ) | Out-Host

start.bat

Code:

-Currency USD -Passwordcurrency BTC 

[minerx117]

Thanks "saul.goodman" i'll add that code to my test rig soon


NemosMiner-v2.2 multi algo profit switching NVIDIA miner  

https://github.com/nemosminer/NemosMiner-v2.0-Zpool/archive/master.zip

still being tested on 1070 and 1080ti atm this is work in progress

bug fixes and a few more features to come

NemosMiner-v2.2 release should be in next couple days  

Best Regards
Nemo

[minerx117]

NemosMiner-v2.2 Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo to get optimal speeds / Fully automated / Set And Forget / Auto Downloads Miners

Easy Setup
step 1: EDIT 'start.bat' change my BTC address to yours, SAVE file
step 2: EDIT 'start.bat' change -SelGPU to suit your cards, SAVE file
step 3:Run 'start.bat'

If you have Windows 7, please update PowerShell:
https://www.microsoft.com/en-us/download/details.aspx?id=50395
CCMiner may need 'MSVCR120.dll' if you don't already have it:
https://www.microsoft.com/en-gb/download/details.aspx?id=40784
CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it:
https://www.microsoft.com/en-us/download/details.aspx?id=48145
running multiple cards its recommend to increase Virtual Memory 32gb-64gb is optimal