deformalde
Newbie
Offline
Activity: 16
Merit: 0
|
|
December 08, 2017, 06:52:22 PM |
|
Try to run it, was working fine for like 6h I had to reboot and then when I'm launching it getting error : No miners !
Try to reinstall from sratch same error....
back to ewbf on flypool.
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
December 08, 2017, 07:18:18 PM |
|
Coming from Nicehash, this seems best option. What version (and pool) would people recommend for profit based algoswitch with BTC payout?
i use zpool24hr personally... Regards Nemo From multipool hub or directly from .bat? miningpoolhub and zpool are two completly different pools... i use zpool24hr.bat on all my rigs atm Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
December 08, 2017, 07:20:04 PM |
|
Try to run it, was working fine for like 6h I had to reboot and then when I'm launching it getting error : No miners !
Try to reinstall from sratch same error....
back to ewbf on flypool.
i Pm'd you
|
NemosMiner-v3.8.1.3
|
|
|
Contay
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 08, 2017, 07:34:50 PM |
|
Coming from Nicehash, this seems best option. What version (and pool) would people recommend for profit based algoswitch with BTC payout?
i use zpool24hr personally... Regards Nemo From multipool hub or directly from .bat? miningpoolhub and zpool are two completly different pools... i use zpool24hr.bat on all my rigs atm Regards Nemo Ah my bad. Sorry. I'll look in to it. Thanks!
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
December 08, 2017, 07:45:57 PM |
|
I have a couple of questions. 1. Is there a way for the initial command prompt box not to open maximized full screen? 2. Can the miners command boxes not open minimized, but displayed?
I have been testing for the last 12 hours and so far only minor hang ups with windows trying to block some of the miners intermittently...
Thank you for your work on this!! Rick
Hey Nemo, wasn't sure if you saw my questions, so bumping them up. 1. 2. it would be possible (you can just minimize and maximize the displays yourself) Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
rickou812
Newbie
Offline
Activity: 21
Merit: 0
|
|
December 08, 2017, 08:01:29 PM |
|
I have a couple of questions. 1. Is there a way for the initial command prompt box not to open maximized full screen? 2. Can the miners command boxes not open minimized, but displayed?
I have been testing for the last 12 hours and so far only minor hang ups with windows trying to block some of the miners intermittently...
Thank you for your work on this!! Rick
Hey Nemo, wasn't sure if you saw my questions, so bumping them up. 1. 2. it would be possible (you can just minimize and maximize the displays yourself) Regards Nemo I do open/close manually at this point, but every time a miner is switched, it is opened minimized. I find it useful, especially when it is benchmarking to watch the miners and note any errors before the window is forced closed by the error. I also have noted on a few occasions a miner is displayed in the main window as active, but the mining is scrolling connection issues and not mining only to be discovered later when looking at the pool stats. I know that you have just built onto/modified existing mining scripts, just was hoping you may be aware of where this is set in the powershell script.
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
December 08, 2017, 08:27:06 PM Last edit: December 08, 2017, 08:52:28 PM by minerx117 |
|
not off the top of my head, i could look into changing it for you but i don't have the time atm, very busy with work (real job) and family issues https://github.com/nemosminer/NemosMiner-v2.2/issues add it to open issues on github Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
rickou812
Newbie
Offline
Activity: 21
Merit: 0
|
|
December 08, 2017, 08:59:02 PM |
|
Thank you Sir, I fully understand. I do appreciate all your efforts!!
|
|
|
|
Max3k
Newbie
Offline
Activity: 79
Merit: 0
|
|
December 08, 2017, 09:40:06 PM |
|
I have a couple of questions. 1. Is there a way for the initial command prompt box not to open maximized full screen? 2. Can the miners command boxes not open minimized, but displayed?
1. Edit start***.bat -> ...-windowstyle maximized... -> minimized 2. Not entirely clear, want to the program is not closed when an error occurs (~pause)?
|
|
|
|
deformalde
Newbie
Offline
Activity: 16
Merit: 0
|
|
December 08, 2017, 09:53:13 PM |
|
Quick question, when you run bat file there's one powershel opening but second one is not coming....anyone have seen this issue ?
|
|
|
|
jb7032
|
|
December 08, 2017, 10:29:45 PM |
|
Hi All- Just started using this program and it's pretty awesome. Currently using it with MPH and wondering if I can add ethash to the possible algo's? I added it to the start.bat and removed all of my benchmarks and its redoing all the benchmarks and has not added ethash to the list. Maybe I missed something? Sorry if this was covered as I haven't read this whole thread.
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
December 08, 2017, 11:14:00 PM |
|
Hi All- Just started using this program and it's pretty awesome. Currently using it with MPH and wondering if I can add ethash to the possible algo's? I added it to the start.bat and removed all of my benchmarks and its redoing all the benchmarks and has not added ethash to the list. Maybe I missed something? Sorry if this was covered as I haven't read this whole thread.
i haven't added eth support yet.. zcash/lyra2v2/neoscrypt/skein etc... is usually more profitable for Nvidia any way its on my to do list.. https://github.com/nemosminer/NemosMiner-v2.2/issues/43Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
deformalde
Newbie
Offline
Activity: 16
Merit: 0
|
|
December 08, 2017, 11:25:17 PM Last edit: December 08, 2017, 11:49:45 PM by deformalde |
|
From my side I fixed issue... I don't know if it's because zcash are down or some pools but I try to execute with zpool24h and zpool and it wasn't working.
I try with startahashpool and it's working.
So now do you when where we can see how many share we have and next payout ?
wow just saw with ahashpool you're paid when you reach 0.005 BTC
tyvm for your work and support.
|
|
|
|
jb7032
|
|
December 09, 2017, 12:18:23 AM |
|
Hi All- Just started using this program and it's pretty awesome. Currently using it with MPH and wondering if I can add ethash to the possible algo's? I added it to the start.bat and removed all of my benchmarks and its redoing all the benchmarks and has not added ethash to the list. Maybe I missed something? Sorry if this was covered as I haven't read this whole thread.
i haven't added eth support yet.. zcash/lyra2v2/neoscrypt/skein etc... is usually more profitable for Nvidia any way its on my to do list.. https://github.com/nemosminer/NemosMiner-v2.2/issues/43Regards Nemo Cool thanks! Love the program so far!
|
|
|
|
tarzanbtc
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 09, 2017, 12:54:51 AM |
|
Any plans to add YiiMP?
|
|
|
|
starcrys
Newbie
Offline
Activity: 27
Merit: 0
|
|
December 09, 2017, 12:58:54 AM |
|
Hi Nemo, I'm not sure what's the problem/happened, but when I tried running 2.2.1, there were some error messages. I opened the NemosMiner-v2.2.1.ps1 and found out that there were some strange characters in the powershell file :
$BestMiners_Combos = $Miners_Type_Combos | ForEach {$Miner_Type_Combo = $_.Combination; $Miners_Index_Combos | ForEach {$Miner_Index_Combo = $_.Combination; [PSCustomObject]@{Combination = $Miner_Type_Combo | ForEach {$Miner_Type_Count = $_.Type.Count; [Regex]$Miner_Type_Regex = 慯(?+ (($_.Type | ForEach {[Regex]::Escape($_)}) -join 搢? + ?$? $Miner_Index_Combo | ForEach {$Miner_Index_Count = $_.Index.Count; [Regex]$Miner_Index_Regex = 慯(?+ (($_.Index | ForEach {[Regex]::Escape($_)}) 杍oin 搢? + ?$? $BestMiners | Where {([Array]$_.Type -notmatch $Miner_Type_Regex).Count -eq 0 -and ([Array]$_.Index -notmatch $Miner_Index_Regex).Count -eq 0 -and ([Array]$_.Type -match $Miner_Type_Regex).Count -eq $Miner_Type_Count -and ([Array]$_.Index -match $Miner_Index_Regex).Count -eq $Miner_Index_Count}}}}}}
Any way to change them to how they were supposed to look like?
Thanks.
|
|
|
|
igotek
|
|
December 09, 2017, 01:10:01 AM |
|
SET PASS=c=BTC,equihash=0.28,lyra2z=0.89,myr-gr=41.3,lyra2v2=23.25,neoscrypt=0.7,decred=1.53,blakecoin=2.85,c11=9.9,groestl=21.1,blake2s=2.3,x17=6.57,nist5=27.94,skein=308.2,sib=7.33,x11evo=9.26,lbry=167,timetravel=15.7,veltor=20.1,bitcore=10.06,hmq1725=2.78,stats
Why did you give these values for zpool ? The bat file gives error when i use this line ass password. if i put x for password it works.
|
I cannot live, I cannot die, trapped in myself. Hold my breath as I wish for death. Oh please god, help me !
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
December 09, 2017, 01:46:58 AM |
|
SET PASS=c=BTC,equihash=0.28,lyra2z=0.89,myr-gr=41.3,lyra2v2=23.25,neoscrypt=0.7,decred=1.53,blakecoin=2.85,c11=9.9,groestl=21.1,blake2s=2.3,x17=6.57,nist5=27.94,skein=308.2,sib=7.33,x11evo=9.26,lbry=167,timetravel=15.7,veltor=20.1,bitcore=10.06,hmq1725=2.78,stats
Why did you give these values for zpool ? The bat file gives error when i use this line ass password. if i put x for password it works.
around 5-6months ago thats 1.7.6... we are at 2.2.1 now...
|
NemosMiner-v3.8.1.3
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
December 09, 2017, 01:49:38 AM |
|
Any plans to add YiiMP?
no it does not support btc payouts...
|
NemosMiner-v3.8.1.3
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
December 09, 2017, 01:51:15 AM |
|
Hi Nemo, I'm not sure what's the problem/happened, but when I tried running 2.2.1, there were some error messages. I opened the NemosMiner-v2.2.1.ps1 and found out that there were some strange characters in the powershell file :
$BestMiners_Combos = $Miners_Type_Combos | ForEach {$Miner_Type_Combo = $_.Combination; $Miners_Index_Combos | ForEach {$Miner_Index_Combo = $_.Combination; [PSCustomObject]@{Combination = $Miner_Type_Combo | ForEach {$Miner_Type_Count = $_.Type.Count; [Regex]$Miner_Type_Regex = 慯(?+ (($_.Type | ForEach {[Regex]::Escape($_)}) -join 搢? + ?$? $Miner_Index_Combo | ForEach {$Miner_Index_Count = $_.Index.Count; [Regex]$Miner_Index_Regex = 慯(?+ (($_.Index | ForEach {[Regex]::Escape($_)}) 杍oin 搢? + ?$? $BestMiners | Where {([Array]$_.Type -notmatch $Miner_Type_Regex).Count -eq 0 -and ([Array]$_.Index -notmatch $Miner_Index_Regex).Count -eq 0 -and ([Array]$_.Type -match $Miner_Type_Regex).Count -eq $Miner_Type_Count -and ([Array]$_.Index -match $Miner_Index_Regex).Count -eq $Miner_Index_Count}}}}}}
Any way to change them to how they were supposed to look like?
Thanks.
my guess is you open/edited the NemosMiner-v2.2.1.ps1 and saved then ran into that error... my code does not look like that re download and don't open NemosMiner-v2.2.1.ps1 edit and run the .bat files best Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
|