[ANN][XCN] Cryptonite - NEW Thread | 1st mini-blockchain coin | Bounties!

[antonio8]

Are there any good nodes to actually sync the wallet?

[simcity4]

I mine solo  for a week and see that wallet behave strange hangs
and today i see accepted with ccminer but coins go to other address not on my wallet.
 
 

[antantti]

Are there any good nodes to actually sync the wallet?

http://xcn-explorer.selektion21.de/?page=peers

[pallas]

I mine solo  for a week and see that wallet behave strange hangs
and today i see accepted with ccminer but coins go to other address not on my wallet.
 
 

Run "listaddressgroupings" in your console.
Solo mining creates a new, unused address.

[antonio8]

Are there any good nodes to actually sync the wallet?

http://xcn-explorer.selektion21.de/?page=peers

Thanks.

[simcity4]

I mine solo  for a week and see that wallet behave strange hangs
and today i see accepted with ccminer but coins go to other address not on my wallet.
 
 

Run "listaddressgroupings" in your console.
Solo mining creates a new, unused address.

i see address but coins are not there
i sent you part of my debug you can see it

[teosanru]

Hello guys I tried to run the sp miner but it crashes. What software do you have to have installed besides the drivers? Any version of visual studio? Cuda

Simply closes,

I appreciate your answers

[Sayman_nsk]

pallas, on btc38 you trade xcn/cny and then cny/btc or xcn/btc? xcn/btc looks like dead...

[barrysty1e]

hi all,

i'm quite stoked to announce... that i've had a major victory over the past few days in regards to getting some compatible pool software up and running for use with cryptonite. initially starting off with a wrapper/template translator for cryptonite's getblocktemplate call, which then progressed into several rewrites (of varying success/performance) of python's stratum-mining; which then turned to ditching it all and writing a pool from scratch with threading, a converted m7 pow algorithm module and memcached.

there are a few bugs left to resolve; and some performance testing to do, but we should have a quick high-performance pool up in the next few days. i will attempt to bring it up later today if anyone is interested in seeing how well it fares. the whole experience has been quite rewarding, with some interesting questions being raised about how the existing mining infrastructure/layout was implemented; and what/why certain methods were used.

oddly enough, i have had literally zero (nada) problems with synchronising the wallet/it becoming lagged or stalling whilst developing the pool; the machine it was running on being a core2quad 2.33, so i'm honestly stumped as to why the other operators have experienced issues    

will post again later on today,
remember kids - built, not bought he said tongue-in-cheek (make haste! aha, hopefully the right people get that)

james

https://i.imgur.com/2odGHep.png
https://i.imgur.com/8x8Xurn.png

[Sayman_nsk]

Damn it! How to exchange xcn to btc on btc38?

[Cyborg72rus]

Damn it! How to exchange xcn to btc on btc38?

xcn to cny - cny to btc (min withdrawal 0.02 btc) or other coin, like doge.

[Sayman_nsk]

Damn it! How to exchange xcn to btc on btc38?

xcn to cny - cny to btc (min withdrawal 0.02 btc) or other coin, like doge.

As i understand, for exchange to cny, need have cny deposit, but if you not from China? you don`t have Chinese ID and can`t trade with cny. Or i`m mistaken?
what`s about bx.in.th exchange?

[Cyborg72rus]

Damn it! How to exchange xcn to btc on btc38?

xcn to cny - cny to btc (min withdrawal 0.02 btc) or other coin, like doge.

As i understand, for exchange to cny, need have cny deposit, but if you not from China? you don`t have Chinese ID and can`t trade with cny. Or i`m mistaken?
what`s about bx.in.th exchange?

You don't need any id to trade xcn to cny and cny to btc. Just send xcn to exchange and trade. I like this exchange

[Dr_Victor]

Community! Let's point the most important problem with xcn, assume fund and solve it?

Maybe we could float Poloniex over with requests to fix xcn trading?

[pallas]

hi all,

i'm quite stoked to announce... that i've had a major victory over the past few days in regards to getting some compatible pool software up and running for use with cryptonite. initially starting off with a wrapper/template translator for cryptonite's getblocktemplate call, which then progressed into several rewrites (of varying success/performance) of python's stratum-mining; which then turned to ditching it all and writing a pool from scratch with threading, a converted m7 pow algorithm module and memcached.

there are a few bugs left to resolve; and some performance testing to do, but we should have a quick high-performance pool up in the next few days. i will attempt to bring it up later today if anyone is interested in seeing how well it fares. the whole experience has been quite rewarding, with some interesting questions being raised about how the existing mining infrastructure/layout was implemented; and what/why certain methods were used.

oddly enough, i have had literally zero (nada) problems with synchronising the wallet/it becoming lagged or stalling whilst developing the pool; the machine it was running on being a core2quad 2.33, so i'm honestly stumped as to why the other operators have experienced issues    

will post again later on today,
remember kids - built, not bought he said tongue-in-cheek (make haste! aha, hopefully the right people get that)

james

https://i.imgur.com/2odGHep.png
https://i.imgur.com/8x8Xurn.png

Great achivement! Looking forward to see a fully working pool soon! :-)

[Sayman_nsk]

It seems to me or the calculator of profit on supernova grafts on 50%?

[pallas]

It seems to me or the calculator of profit on supernova grafts on 50%?

Yes, it's about double. Always been. Not sure if it's because of orphans or some wrong calculations. Ocminer can probably shed light on this.
Besides, orphans are now reported by listtransactions and other rpc methods, so they can be tracked and accounted for (git).

[Flaritos]

hi all,

i'm quite stoked to announce... that i've had a major victory over the past few days in regards to getting some compatible pool software up and running for use with cryptonite. initially starting off with a wrapper/template translator for cryptonite's getblocktemplate call, which then progressed into several rewrites (of varying success/performance) of python's stratum-mining; which then turned to ditching it all and writing a pool from scratch with threading, a converted m7 pow algorithm module and memcached.

there are a few bugs left to resolve; and some performance testing to do, but we should have a quick high-performance pool up in the next few days. i will attempt to bring it up later today if anyone is interested in seeing how well it fares. the whole experience has been quite rewarding, with some interesting questions being raised about how the existing mining infrastructure/layout was implemented; and what/why certain methods were used.

oddly enough, i have had literally zero (nada) problems with synchronising the wallet/it becoming lagged or stalling whilst developing the pool; the machine it was running on being a core2quad 2.33, so i'm honestly stumped as to why the other operators have experienced issues    

will post again later on today,
remember kids - built, not bought he said tongue-in-cheek (make haste! aha, hopefully the right people get that)

james

https://i.imgur.com/2odGHep.png
https://i.imgur.com/8x8Xurn.png

This is some good work, Barry. I sent you a PM, please advise.

[teosanru]

hi all,

i'm quite stoked to announce... that i've had a major victory over the past few days in regards to getting some compatible pool software up and running for use with cryptonite. initially starting off with a wrapper/template translator for cryptonite's getblocktemplate call, which then progressed into several rewrites (of varying success/performance) of python's stratum-mining; which then turned to ditching it all and writing a pool from scratch with threading, a converted m7 pow algorithm module and memcached.

there are a few bugs left to resolve; and some performance testing to do, but we should have a quick high-performance pool up in the next few days. i will attempt to bring it up later today if anyone is interested in seeing how well it fares. the whole experience has been quite rewarding, with some interesting questions being raised about how the existing mining infrastructure/layout was implemented; and what/why certain methods were used.

oddly enough, i have had literally zero (nada) problems with synchronising the wallet/it becoming lagged or stalling whilst developing the pool; the machine it was running on being a core2quad 2.33, so i'm honestly stumped as to why the other operators have experienced issues    

will post again later on today,
remember kids - built, not bought he said tongue-in-cheek (make haste! aha, hopefully the right people get that)

james

https://i.imgur.com/2odGHep.png
https://i.imgur.com/8x8Xurn.png

Great achivement! Looking forward to see a fully working pool soon! :-)

Someone can tell me how to mine in ccminer with 5 GPus, I run a GPU but with 5 I do not know what order I should use to recognize them

ccminer.exe -a m7 -o stratum+tcp://xcn.suprnova.cc:8008 -u user  -p password -R 5

[akai]

I found a lot of block, the machine shows yay, but the wallet has no coins, it's all block with orphans?