Btx001f2
Newbie
Offline
Activity: 9
Merit: 0
|
|
May 31, 2017, 07:57:22 PM |
|
13-14 GPU Board with amd rx vega and will have some crazy rigs this year!!!
|
|
|
|
phobosq
Member
Offline
Activity: 66
Merit: 10
|
|
May 31, 2017, 08:01:40 PM |
|
13x1080 ti would be about OK for those 4kW PSUs and give 8k sol.... I think I'm dreaming
|
|
|
|
vavhab
Newbie
Offline
Activity: 5
Merit: 0
|
|
May 31, 2017, 08:09:44 PM |
|
Is this based on the H1110 chipset? I assume. Max # of PCI Express Lanes on this chipset is 6. So what is the minimum CPU requirement to be able to use 13 cards?
|
|
|
|
Vaccinus
|
|
May 31, 2017, 08:16:39 PM |
|
13x1080 ti would be about OK for those 4kW PSUs and give 8k sol.... I think I'm dreaming where you can find 4k psu? i don't think they exist, the best one i have seen is 2k and it's very niche, i doubt you can by it in mass Is this based on the H1110 chipset? I assume. Max # of PCI Express Lanes on this chipset is 6. So what is the minimum CPU requirement to be able to use 13 cards? i think you can do fine with cheap cpu they probably changed the chipset maximum lanes
|
|
|
|
vavhab
Newbie
Offline
Activity: 5
Merit: 0
|
|
May 31, 2017, 08:28:36 PM |
|
13x1080 ti would be about OK for those 4kW PSUs and give 8k sol.... I think I'm dreaming where you can find 4k psu? i don't think they exist, the best one i have seen is 2k and it's very niche, i doubt you can by it in mass Is this based on the H1110 chipset? I assume. Max # of PCI Express Lanes on this chipset is 6. So what is the minimum CPU requirement to be able to use 13 cards? i think you can do fine with cheap cpu they probably changed the chipset maximum lanes What do you mean they changed the chipset?! Chipset is made by intel https://ark.intel.com/products/90590/Intel-H110-ChipsetIt is a ~2 years old ancient. MOBO vendors usually doesn't re-engineer chipsets.
|
|
|
|
minerx117
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
May 31, 2017, 09:23:46 PM |
|
linux only windows can only support up to 8 gpus... thats why at computex they only had 8 gpus hooked up.. because they were running a windows 10 os if you want to use 13-14 gpus with this board you will be running linux... https://www.youtube.com/watch?v=TImqhByN1CQ
|
NemosMiner-v3.8.1.3
|
|
|
thesmokingman
|
|
May 31, 2017, 09:39:31 PM |
|
man the people complaining that if one card goes down the whole rig goes down obviously haven't played around with the watchdog settings on their miner or are only running one mining instance for all their cards...def better options out there to keep this beast of a rig running despite how many cards fall off...
Also looks like Finksy and Optimizer are about to get a lot more business for their 2-4k server PSUs breakout boards...
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
May 31, 2017, 09:49:28 PM |
|
13 PCI-E plus an M.2 so potentially 14 cards.
That's crazy.
I'd guess windows won't be able to handle that many cards so it will be linux territory.
IF this board happens and MS see some kind of money in it i can see them making win 10 take a lot more cards in there next update due out soon, but id still Use Linux for three or more cards, it's a lot more stable, so i found out ....and use win10 for 2 or less cards and every day use, like i do now ..
|
|
|
|
thesmokingman
|
|
May 31, 2017, 10:07:03 PM |
|
13 PCI-E plus an M.2 so potentially 14 cards.
That's crazy.
I'd guess windows won't be able to handle that many cards so it will be linux territory.
IF this board happens and MS see some kind of money in it i can see them making win 10 take a lot more cards in there next update due out soon, but id still Use Linux for three or more cards, it's a lot more stable, so i found out ....and use win10 for 2 or less cards and every day use, like i do now .. Windows 10 ETH Home Edition LOL
|
|
|
|
cryptonikus
|
|
May 31, 2017, 10:12:09 PM |
|
Awesome news! I've been waiting for this for a long time. Of course I'd much rather use the H81, but since they are all bought out this new one is a welcome addition. I want some of them! Now server PSU make sense again
You need at least 2400W to drive 13-14 GPU. Two server PSUs maybe
|
|
|
|
|
NameTaken
|
|
June 01, 2017, 02:32:02 AM |
|
The open x1 slots mean you can use 6 2 slot cards without risers but the spacing is off so would you be able to use this motherboard in a case?
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
June 01, 2017, 02:58:30 AM |
|
The open x1 slots mean you can use 6 2 slot cards without risers but the spacing is off so would you be able to use this motherboard in a case?
By the looks of it YES but what kind of case ?, id would use one of the really good open air frames with lots of room . The open x1 slots mean you can use 6 2 slot: it should sense are all you can use in this case is risers card.. I want one and wonder how much it will cost, if it even hits the US . I want one of the new AM4 boards that has yet to go on sell in the US ... http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=882
|
|
|
|
whitrzac
Member
Offline
Activity: 126
Merit: 10
90*c is good, right?
|
|
June 01, 2017, 03:04:04 AM |
|
The open x1 slots mean you can use 6 2 slot cards without risers but the spacing is off so would you be able to use this motherboard in a case?
By the looks of it YES but what kind of case ?, id would use one of the really good open air frames with lots of room . The open x1 slots mean you can use 6 2 slot: it should sense are all you can use in this case is risers card.. I want one and wonder how much it will cost, if it even hits the US . I want one of the new AM4 boards that has yet to go on sell in the US ... http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=882Why? There are plenty of other boards that will do 6 cards and not have issues... It's not like they cost any less, especially after the scalpers get them.
|
|
|
|
Amph
Legendary
Offline
Activity: 3234
Merit: 1069
|
|
June 02, 2017, 04:12:48 PM Last edit: June 03, 2017, 07:31:04 AM by Amph |
|
The open x1 slots mean you can use 6 2 slot cards without risers but the spacing is off so would you be able to use this motherboard in a case?
By the looks of it YES but what kind of case ?, id would use one of the really good open air frames with lots of room . The open x1 slots mean you can use 6 2 slot: it should sense are all you can use in this case is risers card.. I want one and wonder how much it will cost, if it even hits the US . I want one of the new AM4 boards that has yet to go on sell in the US ... http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=882i have a new design in mind for a compat air frame, that can handle easily all the 14 gpu while remaining with the same space occupied 6 gpu behind the psu/motherboard and 6 gpu in front of the six one behind the psu/motherboard, i just give you an idea
|
|
|
|
mewhoyou
|
|
June 02, 2017, 05:02:22 PM |
|
The open x1 slots mean you can use 6 2 slot cards without risers but the spacing is off so would you be able to use this motherboard in a case?
By the looks of it YES but what kind of case ?, id would use one of the really good open air frames with lots of room . The open x1 slots mean you can use 6 2 slot: it should sense are all you can use in this case is risers card.. I want one and wonder how much it will cost, if it even hits the US . I want one of the new AM4 boards that has yet to go on sell in the US ... http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=882i have a new design in mind for a compat air frame, that can handle easily all the 14 gpu while remaining with the same space occupied 6 cpu behind the psu/motherboard and 6 gpu in front of the six one behind the psu/motherboard, i just give you an idea problem is the mobo is sitting in the middle and heat is a problem. I tried that setup with 4 front and 4 back ... doesnt work so well.
|
Ethereum the Next Big Thing?
|
|
|
Spotswood
|
|
June 03, 2017, 06:16:40 AM |
|
I'm looking forward to building a frame for this board.
|
|
|
|
Amph
Legendary
Offline
Activity: 3234
Merit: 1069
|
|
June 03, 2017, 07:30:23 AM |
|
The open x1 slots mean you can use 6 2 slot cards without risers but the spacing is off so would you be able to use this motherboard in a case?
By the looks of it YES but what kind of case ?, id would use one of the really good open air frames with lots of room . The open x1 slots mean you can use 6 2 slot: it should sense are all you can use in this case is risers card.. I want one and wonder how much it will cost, if it even hits the US . I want one of the new AM4 boards that has yet to go on sell in the US ... http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=882i have a new design in mind for a compat air frame, that can handle easily all the 14 gpu while remaining with the same space occupied 6 cpu behind the psu/motherboard and 6 gpu in front of the six one behind the psu/motherboard, i just give you an idea problem is the mobo is sitting in the middle and heat is a problem. I tried that setup with 4 front and 4 back ... doesnt work so well. you need to add 3 140mm front fan to exhaust the heat and maybe other 3 in front of the first 6 gpu, overheating motherboard should be something really hard to do with my idea the first 6 would end at half of where the motherboard is, and the other start from there in front of them
|
|
|
|
couture
|
|
June 03, 2017, 09:24:39 AM |
|
is there an estimated release date for this mobo?
|
|
|
|
Sequoia93
Member
Offline
Activity: 116
Merit: 10
|
|
June 03, 2017, 01:19:56 PM |
|
is there an estimated release date for this mobo?
Well apparently the demo model at Computex burned up day 1 with 8 cards on it, so don't hold your breath
|
|
|
|
|