Any word on amd vega hash rates?

[duyquang06]

Cast_XMR Vega56 Ref come with 1970 h/s

[1714830413]

1714830413

[1714830413]

1714830413

[Shnikes101]

I changed to cast xmr from xmr stak.
Much more simpler and steady hashrate. Hashrate is definitely higher than xmr stak at the same power useage.
Cast xmr , latest drivers 1750hs for each vega56 @140w at the wall

I'm getting 1850h/s with sapphire pulse vega56 (hynix) 1456/970@0.875v 140watt according to corsair link
SrbMiner

What are your thoughts on Srb? Last I looked it appeared to be the easiest implementation for CnoteHeavy.

[rednoW]

I changed to cast xmr from xmr stak.
Much more simpler and steady hashrate. Hashrate is definitely higher than xmr stak at the same power useage.
Cast xmr , latest drivers 1750hs for each vega56 @140w at the wall

I'm getting 1850h/s with sapphire pulse vega56 (hynix) 1456/970@0.875v 140watt according to corsair link
SrbMiner

What are your thoughts on Srb? Last I looked it appeared to be the easiest implementation for CnoteHeavy.

I really like it. My aio vegas 64 (Samsung) are doing 2100h/s (crptnhtv7). For heavy I use my old Polaris cards, they look more efficient ...

[heavyarms1912]

Vega 56 1475/1100 Mhz @ 881mV (bios mod to V64)
Cryptonight v7 hashrate of 2020 H/s and cryptonight heavy 1475 H/s using SRB miner on Adrenalin 18.3.4 drivers.

p.s I was getting 1960-1965 on xmr-stak

So far SRB miner has been rocking all Cryptonight algos for me on both Polaris and Vega.

[wudafuxup]

I changed to cast xmr from xmr stak.
Much more simpler and steady hashrate. Hashrate is definitely higher than xmr stak at the same power useage.
Cast xmr , latest drivers 1750hs for each vega56 @140w at the wall

I'm getting 1850h/s with sapphire pulse vega56 (hynix) 1456/970@0.875v 140watt according to corsair link
SrbMiner

What are your thoughts on Srb? Last I looked it appeared to be the easiest implementation for CnoteHeavy.

I really like SRBMiner a lot. I hated Cast XMR because I always got horrible good shares vs bad shares sumbited. XMR stak never had any bad share errors at all. SRB works great just like XMR stak with a slight boost in performance. Much easier to use aswell. There's a good video on youtube explaining how to set it up.

[Sgsg666]

Vega 56 1475/1100 Mhz @ 881mV (bios mod to V64)
Cryptonight v7 hashrate of 2020 H/s and cryptonight heavy 1475 H/s using SRB miner on Adrenalin 18.3.4 drivers.

p.s I was getting 1960-1965 on xmr-stak

So far SRB miner has been rocking all Cryptonight algos for me on both Polaris and Vega.

Can you tell me your Hs/Watt? Im currently at 1789 hs / 138 w on hwinfo64 - stable. Running Gigabyte oc vega 56 stock(hynix?) on Adrenalin 18.3.4 drivers. HBM temp at 56. (cant post pool 24 hrs confirmation since my miner recently switched to new one.)

http://i61.photobucket.com/albums/h66/32442fsdfs/3_zps64jnm3ta.png
http://i61.photobucket.com/albums/h66/32442fsdfs/2_zpsbhsrhy3u.png
http://i61.photobucket.com/albums/h66/32442fsdfs/Capture_zpsokdgb5jj.png
Also for some reason my vega wont use fan rpm from overdrive. Is it because i tweaked my powerplay table?

[zot57]

I have 6x sapphire vega 56 (Nitro+ with 3 fans) Hynix memory and two of them won't get same hashrate as others.
https://prnt.sc/j85b69

They are all on same setup, 900Mhz memory. Although after few hours those two drop to 800Mhz (stock).

I use srbminer. Any ideas how to get higher hashrates for all cards and why are those two dropping in hashrate that much?

[Kaezar]

I have 6x sapphire vega 56 (Nitro+ with 3 fans) Hynix memory and two of them won't get same hashrate as others.
https://prnt.sc/j85b69

They are all on same setup, 900Mhz memory. Although after few hours those two drop to 800Mhz (stock).

I use srbminer. Any ideas how to get higher hashrates for all cards and why are those two dropping in hashrate that much?

1. disable/enable vega in device manager.
2. Check HBM segment is off. When miner starts vega's name must be gfx900(not gfx901).
3. double check miner settings.
3. set target temp to 55.

[heavyarms1912]

Vega 56 1475/1100 Mhz @ 881mV (bios mod to V64)
Cryptonight v7 hashrate of 2020 H/s and cryptonight heavy 1475 H/s using SRB miner on Adrenalin 18.3.4 drivers.

p.s I was getting 1960-1965 on xmr-stak

So far SRB miner has been rocking all Cryptonight algos for me on both Polaris and Vega.

Can you tell me your Hs/Watt? Im currently at 1789 hs / 138 w on hwinfo64 - stable. Running Gigabyte oc vega 56 stock(hynix?) on Adrenalin 18.3.4 drivers. HBM temp at 56. (cant post pool 24 hrs confirmation since my miner recently switched to new one.)

http://i61.photobucket.com/albums/h66/32442fsdfs/3_zps64jnm3ta.png
http://i61.photobucket.com/albums/h66/32442fsdfs/2_zpsbhsrhy3u.png
http://i61.photobucket.com/albums/h66/32442fsdfs/Capture_zpsokdgb5jj.png
Also for some reason my vega wont use fan rpm from overdrive. Is it because i tweaked my powerplay table?

Last time i measured it was 160w at wall.  On HWinfo it shows as 120w odd avg.  
https://imgur.com/a/UGadhON

Yea I noticed the fan settings aren't used from Overdrive.  I didn't pay too much attention to it as the temps are alright.

[CryptoPlay]

1. disable/enable vega in device manager.
2. Check HBM segment is off. When miner starts vega's name must be gfx900(not gfx901).
3. double check miner settings.
3. set target temp to 55.

Card recognized as gfx900 has lots of more trouble mining.
I do have 6 identical Sapphire 64 and one was identified as gfx900 by xmr-stak. SRBMiner identified all as gfx901.
Only few cards are identified as 900 and no one really knows why cuz ive already asked around in several places.


To the guy above, yes, you need to add 30 to 40W to any software measurement. This is old news.

[Kaezar]

1. disable/enable vega in device manager.
2. Check HBM segment is off. When miner starts vega's name must be gfx900(not gfx901).
3. double check miner settings.
3. set target temp to 55.

Card recognized as gfx900 has lots of more trouble mining.
I do have 6 identical Sapphire 64 and one was identified as gfx900 by xmr-stak. SRBMiner identified all as gfx901.
Only few cards are identified as 900 and no one really knows why cuz ive already asked around in several places.


To the guy above, yes, you need to add 30 to 40W to any software measurement. This is old news.

gfx900 means that HBCC memory is turned off
gfx901 means that HBCC memory is turned on
(c) glph3k

[chup]

gfx900 means that HBCC memory is turned off
gfx901 means that HBCC memory is turned on
(c) glph3k

Any regedit way of switching HBCC off?

[jmigdlc99]

gfx900 means that HBCC memory is turned off
gfx901 means that HBCC memory is turned on
(c) glph3k

Any regedit way of switching HBCC off?

Why would you need to switch HBCC off and on? All you need is to keep it on all the time for higher hash rates.

You can automate the processes of turning it on/off using scripts like the one found in this guide: http://vega.miningguides.com/p/auto-run-miner-without-hashmonitor.html

[rednoW]

gfx900 means that HBCC memory is turned off
gfx901 means that HBCC memory is turned on
(c) glph3k

Any regedit way of switching HBCC off?

Why would you need to switch HBCC off and on? All you need is to keep it on all the time for higher hash rates.

You can automate the processes of turning it on/off using scripts like the one found in this guide: http://vega.miningguides.com/p/auto-run-miner-without-hashmonitor.html

HBCC doesn't affect on mining performance at all ...

[Ystss]

I really like it. My aio vegas 64 (Samsung) are doing 2100h/s (crptnhtv7). For heavy I use my old Polaris cards, they look more efficient ...

Is the hashrate in the miner and on the pool the same?

[wudafuxup]

gfx900 means that HBCC memory is turned off
gfx901 means that HBCC memory is turned on
(c) glph3k

Any regedit way of switching HBCC off?

You're so missinformed  . The whole HBCC (HBCC was never the problem) thing started in early october of 2017. Do a little more research.

It's been like 7 months lmao.

[zeef]

Hi Guys,

I will buy some vega 56 or 64 on amazon, 

Any tips for brands or partnumbers for increase the possibility of getting an vega with Samsung memory ?

Thanks

[ivakar]

Hi Guys,

I will buy some vega 56 or 64 on amazon, 

Any tips for brands or partnumbers for increase the possibility of getting an vega with Samsung memory ?

Thanks

The question is which card will you buy, I mean is it reference version or version form asus and sapphire, cause they are different from each other?  I have vega from gigabyte but that is simple reference version build by amd.
I was lucky to have Samsung memory on that board..

[chup]

gfx900 means that HBCC memory is turned off
gfx901 means that HBCC memory is turned on
(c) glph3k

Any regedit way of switching HBCC off?

You're so missinformed  . The whole HBCC (HBCC was never the problem) thing started in early october of 2017. Do a little more research.

It's been like 7 months lmao.

Do You know answer to my question? You should, because You're full of... good informations.

[zeef]

Hi Guys,

I will buy some vega 56 or 64 on amazon, 

Any tips for brands or partnumbers for increase the possibility of getting an vega with Samsung memory ?

Thanks

The question is which card will you buy, I mean is it reference version or version form asus and sapphire, cause they are different from each other?  I have vega from gigabyte but that is simple reference version build by amd.
I was lucky to have Samsung memory on that board..

Hi ivakar,

Thanks for help,

I just thinking for the reference version too, that had the turbine cooler, could it increase the possibility of have samsung memory?

Could you send the link of amazon of your card?

Thanks