Any word on amd vega hash rates?

[bill121]

I'd start by dialling back the overclocking on all cards to 1080 and see if they all hold at that, then one by one increase them to see if they hold 1100. Personally I prefer running all cards a little below the max, mixed opinions on this but for 24/7 running I don't think it's wise to push the cards especially reference Vegas with the pissy drivers and high temps.

For me card temps weren't related to the GPU COMPUTE ERROR, as long as the cards were clocked stable high temps only reduced mining speed in my experience.

Hey everyone, i am new to this forum. Out of 6, one of my vega 64, when installed BC driver and after running PP registry, went full throttle on fan speed, and windows error shows up showing gpu temp overload and my system hangs. Its just with one card, no matter what i do, on normal driver it works fine, but on BC driver its creating this problem. Is my GPU faulty, should i return it ?. Please help

Start by dialling back the overclock/undervolt in that card. Not all cards can hold the same speeds/voltages. One of mine always runs 10% slower than the rest. I change the tach lights to blue on the weaker card/s that way when new drivers are installed or different mining software used and the order gets messed up you can track the weaker card easily

[1714908408]

1714908408

[1714908408]

1714908408

[1714908408]

1714908408

[1714908408]

1714908408

[l1xx]

lets ask for the third time - is anyone getting errors like this: "GPU COMPUTE ERROR" and how do you stop it - by lowering temps on a card or by reducing memory clock?

maybe you can try a few changes and report back ? I did see some of these errors when pushing the cards beyond their limits. Don't remember what I did exactly to fix them.

Yeah, I was going to do that, but wanted to check if someone knew what is it As my other rig has no such issues, but I have only 64s on it.

I guess one or all 3 56s I have here don't like the 1100 memory much, but its running almost 48h stable now, and don't really want to mess with it before its needed.
But I am losing like 1% results because of this error on the other hand ...

[yessir]

Hey everyone, i am new to this forum. Out of 6, one of my vega 64, when installed BC driver and after running PP registry, went full throttle on fan speed, and windows error shows up showing gpu temp overload and my system hangs. Its just with one card, no matter what i do, on normal driver it works fine, but on BC driver its creating this problem. Is my GPU faulty, should i return it ?. Please help

hey, I have same issue but I don't know how to check which one of my cards causes trouble.

How do I check it? some logs etc? I'm using Win10.

[l1xx]

Hey everyone, i am new to this forum. Out of 6, one of my vega 64, when installed BC driver and after running PP registry, went full throttle on fan speed, and windows error shows up showing gpu temp overload and my system hangs. Its just with one card, no matter what i do, on normal driver it works fine, but on BC driver its creating this problem. Is my GPU faulty, should i return it ?. Please help

hey, I have same issue but I don't know how to check which one of my cards causes trouble.

How do I check it? some logs etc? I'm using Win10.

Watch the cards while loading windows. You will see which one is making the problem and you can go from there.

[yessir]

Hey everyone, i am new to this forum. Out of 6, one of my vega 64, when installed BC driver and after running PP registry, went full throttle on fan speed, and windows error shows up showing gpu temp overload and my system hangs. Its just with one card, no matter what i do, on normal driver it works fine, but on BC driver its creating this problem. Is my GPU faulty, should i return it ?. Please help

hey, I have same issue but I don't know how to check which one of my cards causes trouble.

How do I check it? some logs etc? I'm using Win10.

Watch the cards while loading windows. You will see which one is making the problem and you can go from there.

So just few minutes ago my rig hanged again after few hours of working.
What I noticed was that GPUTech leds at one cards was fully loaded without any changes - I think that this was problematic card.

Than I restarted windows. None of them was making problems :-)
So now I'll dial down OC on this card and wait...

[R0mi]

Thanks.  I was able to edit that batch file and it's working well enough.  I seems to hang and have a few errors when I've tried to execute it though.  Like one time it disabled the cards, but then only re-enabled one of them.  It doesn't happen every time, but I'll keep working at it to see if it's on my end.

I'm still running at full speed now after a whole day of mining.  I have nicehash and a couple nvidia cards on this board, but if I run any of them it kills the speed on castxmr.  It reallys sucks, but it appears you gotta keep your AMD cards on a dedicated board running just one algorithm if you have Vega's.  Every time any other nicehash window pops up I notice the decline.

This is disappointing because I have an ASUS B250 Mining Expert board in the mail right now and sold my Biostar to my friend.  It supports "19" cards so I was hoping to be able to throw all my cards onto this one board.  

How many Vega's have people successfully ran on one machine?  Most builds I see comprise of only 4-6 Vega cards.  
<snip>

I find that Ryzen builds do better in situations like Cast + XMR-STAK-cpu at the same time, or Cast + EWBF.  Other than that, try lowering intensity for the Nvidia cards.

8 Vegas seems to be max that a few people have reported.

[Spiff637]

Hey everyone, i am new to this forum. Out of 6, one of my vega 64, when installed BC driver and after running PP registry, went full throttle on fan speed, and windows error shows up showing gpu temp overload and my system hangs. Its just with one card, no matter what i do, on normal driver it works fine, but on BC driver its creating this problem. Is my GPU faulty, should i return it ?. Please help

hey, I have same issue but I don't know how to check which one of my cards causes trouble.

How do I check it? some logs etc? I'm using Win10.

Watch the cards while loading windows. You will see which one is making the problem and you can go from there.

Also to try to identify the poorly running card leave it out of the batch file and once you find that the card that was preforming poorly is NOT hashing look in the case and check for the fan leds and the one that's not under load is that card.    Let me know if you need me to step by step that or clarify my language a little.

[oomurashin]

Have anyone tried mining with vega frontier edition? Wondering if the extra ram helps with running XMR?

about 2200H/s. 

[Documan]

Have anyone tried mining with vega frontier edition? Wondering if the extra ram helps with running XMR?

about 2200H/s. 

Is that fast?

[tf2addict]

Have anyone tried mining with vega frontier edition? Wondering if the extra ram helps with running XMR?

about 2200H/s. 

Is that fast?

Quite fast.

[tf2addict]

You need win10x64 with blockchan drivers and HBCC enabled to hit 1600-1700h/s xmr

1600 xmr is pretty good.  what is the temp and the watts for that?

my amd ryzen 1800x   cpu does 580 h on  stock clock settings  uses about 70-75 watts more  with this rig
https://www.nicehash.com/miner/146UJM5kgzLVUV23CXCf33KQKHckoX1gx3

130 watt for 1600h/s - this is diff between idle and mining with one card measured from the wall, so guess total is near 150 watt ... much more for 1700h/s cause you will need max gpu clock and voltage.
Temps are fine for me - I use liquid cool Vega ))))))))))))))))))))


And one more ... Vega seemes to not need monitor or dummy plug attached for tuning - very convinient ))

I don't see how that has anything to do with Vegas.  If I don't have a monitor or plug in TeamViewer and VNC will not display any video.

[rednoW]

You need win10x64 with blockchan drivers and HBCC enabled to hit 1600-1700h/s xmr

1600 xmr is pretty good.  what is the temp and the watts for that?

my amd ryzen 1800x   cpu does 580 h on  stock clock settings  uses about 70-75 watts more  with this rig
https://www.nicehash.com/miner/146UJM5kgzLVUV23CXCf33KQKHckoX1gx3

130 watt for 1600h/s - this is diff between idle and mining with one card measured from the wall, so guess total is near 150 watt ... much more for 1700h/s cause you will need max gpu clock and voltage.
Temps are fine for me - I use liquid cool Vega ))))))))))))))))))))


And one more ... Vega seemes to not need monitor or dummy plug attached for tuning - very convinient ))

I don't see how that has anything to do with Vegas.  If I don't have a monitor or plug in TeamViewer and VNC will not display any video.

well. that was rather old post ))
I meant that you don't need monitor or dummy plug attached to vegas and still can tune clocks, etc. My monitor is attached to iGPU.
For my old hawaii and tahiti rigs I need to attach at least one card to monitor or dummy to have ability to control clocks and voltages

[Ystss]

so much hashrates has received today on a vega64 with regmod
1408 core, 1110 mem
https://i.imgur.com/385kvBa.jpg
https://i.imgur.com/4U6ophv.jpg
Here is the system

Asus p5b
e8400
6GB RAM
Sapphire Vega64
Nvidia 7300GS
TV Panasonic TX-PR50VT20 plugged into Nvidia 7300GS
But as soon as I connected system to the monitor, the h/s down to 2000. I once again connected the system to the TV and the hashrates back to 2500. But in an attempt to find the reason for the h/s fall, I can not get 2500h/s anymore.

[R0mi]

I find that Ryzen builds do better in situations like Cast + XMR-STAK-cpu at the same time, or Cast + EWBF.  Other than that, try lowering intensity for the Nvidia cards.

8 Vegas seems to be max that a few people have reported.

Microtech has the Ryzen 1800X for $299, that price is live now at Microtech stores.  Good price.

[KaydenC]

Have anyone tried mining with vega frontier edition? Wondering if the extra ram helps with running XMR?

about 2200H/s. 

Is that fast?

Quite fast.

About 15% faster than Vega 56. But costs way more, not worth it I guess. I thought with double the ram it can hash way more, like 3Kh/s

[oomurashin]

so much hashrates has received today on a vega64 with regmod
1408 core, 1110 mem


Here is the system

Asus p5b
e8400
6GB RAM
Sapphire Vega64
Nvidia 7300GS
TV Panasonic TX-PR50VT20 plugged into Nvidia 7300GS
But as soon as I connected system to the monitor, the h/s down to 2000. I once again connected the system to the TV and the hashrates back to 2500. But in an attempt to find the reason for the h/s fall, I can not get 2500h/s anymore.

are you serious? 2500H/s each 

[carlo_0000]

You need win10x64 with blockchan drivers and HBCC enabled to hit 1600-1700h/s xmr

1600 xmr is pretty good.  what is the temp and the watts for that?

my amd ryzen 1800x   cpu does 580 h on  stock clock settings  uses about 70-75 watts more  with this rig
https://www.nicehash.com/miner/146UJM5kgzLVUV23CXCf33KQKHckoX1gx3

130 watt for 1600h/s - this is diff between idle and mining with one card measured from the wall, so guess total is near 150 watt ... much more for 1700h/s cause you will need max gpu clock and voltage.
Temps are fine for me - I use liquid cool Vega ))))))))))))))))))))


And one more ... Vega seemes to not need monitor or dummy plug attached for tuning - very convinient ))

I don't see how that has anything to do with Vegas.  If I don't have a monitor or plug in TeamViewer and VNC will not display any video.

well. that was rather old post ))
I meant that you don't need monitor or dummy plug attached to vegas and still can tune clocks, etc. My monitor is attached to iGPU.
For my old hawaii and tahiti rigs I need to attach at least one card to monitor or dummy to have ability to control clocks and voltages

i have no monitor on none of my ring
it just work fine with msi afterburner and ultravnc (just the screen in in 640*480 )

[martyroz]

Am I dreaming or is 4 * Vega56 going to work on my P5K-SE (4GB RAM, Intel Core2 Duo E8200) Windows 10 64bit?
Pairing with Corsair 1000W

Also do I *need* an SSD for the virtual memory or will an old school HDD suffice (win10 is installed there already)?

[Quubik]

so much hashrates has received today on a vega64 with regmod
1408 core, 1110 mem
https://i.imgur.com/385kvBa.jpg
https://i.imgur.com/4U6ophv.jpg
Here is the system

Asus p5b
e8400
6GB RAM
Sapphire Vega64
Nvidia 7300GS
TV Panasonic TX-PR50VT20 plugged into Nvidia 7300GS
But as soon as I connected system to the monitor, the h/s down to 2000. I once again connected the system to the TV and the hashrates back to 2500. But in an attempt to find the reason for the h/s fall, I can not get 2500h/s anymore.

What driver and which regmod are you using ?

1110 mem clock is not possible on blockchain unless you really know what you are doing 

[Ystss]

What driver and which regmod are you using ?

win10 64 Blockchain 17.30.1029

1110 mem clock is not possible on blockchain unless you really know what you are doing  

change limit SoC clocks
http://www.overclock.net/t/1633446/preliminary-view-of-amd-vega-bios/570#post_26408383