[ANN] [QRK] Quark | POW/POS+MN | 0.10.7.7 - New Self Moderated Thread

[fedde]

... and now they also freezed withdraw and deposit

Of course it will be put into maintaince alot, if you read the post where they are releasing a 10.7.2 version that hopefully will solve abit on the stability of the daemon.
Until that happens, we are currently in discussion if the wallet should be put into maintaince until there is a decent release that works.

[Smartjag]

... and now they also freezed withdraw and deposit

Of course it will be put into maintaince alot, if you read the post where they are releasing a 10.7.2 version that hopefully will solve abit on the stability of the daemon.
Until that happens, we are currently in discussion if the wallet should be put into maintaince until there is a decent release that works.

I hope the developers don't use the word "hopefully". There will be a blockchain service offered here with a crypto currency that is available 24/7. It was decided to make the migration on the live blockchain, then you should be sure to get it right.
It can always happen that something goes wrong, but if it takes more than 24 hours until this bug is fixed, you can't trust it. Weekend failures are not handled at all.

[zifeiyu008]

0.10.7.1 wallet synchronized nodes already show 0.10.7.2！ Why not release it？？？

[justmyname]

0.10.7.1 wallet synchronized nodes already show 0.10.7.2！ Why not release it？？？

I hope something is done. I have downloaded 0.10.6.3 and can't get my coins out. Wiped it clean from my computer, put in the saved dat file, and it gets down to 9 days and won't update any further? 

[justmyname]

Wish I could put these coins into some hardware wallet that won't break down.

I might help the price of the coin.  if we actually had a way to get the coins out of the wallet. 

[Smartjag]

0.10.7.1 wallet synchronized nodes already show 0.10.7.2！ Why not release it？？？

I hope something is done. I have downloaded 0.10.6.3 and can't get my coins out. Wiped it clean from my computer, put in the saved dat file, and it gets down to 9 days and won't update any further? 

Use this version:
https://github.com/quark-project-evolution/quark/releases/tag/v0.10.7.1
It crashes very often, but it seems at the momemt to be the only wallet which works.

Version 0.10.7.2 is promised already a long time ... 

[BlackDiamond37]

After 5 minutes the wallet crash. In debug.log writes the following:

GUI: setGeometry: Unable to set geometry 5x13+480+170 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry:  128x13+480+170 (frame: 4, 27, 4, 4, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).
2019-08-31 06:06:07 AppInit2 : parameter interaction: -listen=0 -> setting -discover=0
2019-08-31 06:06:07 GUI: "registerShutdownBlockReason: Successfully registered: Quark Core didn't yet exit safely..."
2019-08-31 06:06:07

What to do?

[ghzsymc2]

0.10.7.2 release

Fix wallet crash

https://github.com/quark-project-evolution/quark/releases/tag/v0.10.7.2

[ghzsymc2]

Thank you for your patience

Quark is an excellent project

But in the past few years, quark ecology has been seriously damaged

What we have to share is that we don't have enough money to hire developers full-time



So there is a need to skip tickets

But trust me, the quark team has done everything they can



We will continue to restore the lost ecology with the arrival of the masternode

Hope everyone together to jointly build it

[justmyname]

0.10.7.2 release

Fix wallet crash

https://github.com/quark-project-evolution/quark/releases/tag/v0.10.7.2

Any instructions on how to use this. Do I just download it and run it?

[ghzsymc2]

0.10.7.2 release

Fix wallet crash

https://github.com/quark-project-evolution/quark/releases/tag/v0.10.7.2

Any instructions on how to use this. Do I just download it and run it?

yes

Download the corresponding version

Maybe you need some wallet knowledge

You can search the Internet and learn it

[amarian12]

i just finish the code update in order to support the new wallet but i need someone to test it (redirect some hash power to it)

http://p2pool.e-pool.net:5860/static/

[AggroHead]

I dont understand why blockreward sometime contains mn-reward and sometime contains not.
Could someone please explain this behaviour?

2.46277 qrk for masternode (block 7186675):

Code:

{
   "txid": "9ed78d38cf4ca48af99484855fe1b48d0e5619b0ff2ae551da69853fa070e4aa",
   "version": 1,
   "locktime": 0,
   "vin": [
      {
         "coinbase": "03f3a86d0447b56b5d088100002c750000007969696d7000",
         "sequence": 0
      }
   ],
   "vout": [
      {
         "value": 2.46277,
         "n": 0,
         "scriptPubKey": {
            "asm": "OP_DUP OP_HASH160 be2b394514fb004d27d168a893ba19fc1fc5b97a OP_EQUALVERIFY OP_CHECKSIG",
            "hex": "76a914be2b394514fb004d27d168a893ba19fc1fc5b97a88ac",
            "reqSigs": 1,
            "type": "pubkeyhash",
            "addresses": [
               "QdwWGyx6m7SsAnvqAaVwji9sXmeEmPzLEv"
            ]
         }
      },
      {
         "value": 1.23139,
         "n": 1,
         "scriptPubKey": {
            "asm": "OP_DUP OP_HASH160 df297fb547331c691d876ceefe21cec085606813 OP_EQUALVERIFY OP_CHECKSIG",
            "hex": "76a914df297fb547331c691d876ceefe21cec08560681388ac",
            "reqSigs": 1,
            "type": "pubkeyhash",
            "addresses": [
               "QgwxWU7xRWEVXnHyBqdgsEFDwjVVB75LyC"
            ]
         }
      }
   ],
   "blockhash": "00000000000c31d961f797a2a8a212b2c74a043ca61310d4b5a6233c50fa5e9e",
   "confirmations": 4,
   "time": 1567339845,
   "blocktime": 1567339845
}

no reward for masternode (block 7186673):

Code:

{
   "txid": "ef02c3e9cda9b5011eac41074f0c0705391d7a3a5ce3058bfb994f2bc7d78b42",
   "version": 1,
   "locktime": 0,
   "vin": [
      {
         "coinbase": "03f1a86d0416b56b5d0881000005792500007969696d7000",
         "sequence": 0
      }
   ],
   "vout": [
      {
         "value": 3.69416,
         "n": 0,
         "scriptPubKey": {
            "asm": "OP_DUP OP_HASH160 1993d4d26ea50fb09c1bce734f82ea581dc9d43e OP_EQUALVERIFY OP_CHECKSIG",
            "hex": "76a9141993d4d26ea50fb09c1bce734f82ea581dc9d43e88ac",
            "reqSigs": 1,
            "type": "pubkeyhash",
            "addresses": [
               "QNwE6bWzpNMMwdRLdw1Mr4wbBQFjN97aqb"
            ]
         }
      }
   ],
   "blockhash": "0000000000074c441bf0a3d203b068a0611fa3b76768eac92c8498e3c6c8e15b",
   "confirmations": 7,
   "time": 1567339798,
   "blocktime": 1567339798
}

[Smartjag]

I dont understand why blockreward sometime contains mn-reward and sometime contains not.
Could someone please explain this behaviour?

2.46277 qrk for masternode (block 7186675):

Code:

{
   "txid": "9ed78d38cf4ca48af99484855fe1b48d0e5619b0ff2ae551da69853fa070e4aa",
   "version": 1,
   "locktime": 0,
   "vin": [
      {
         "coinbase": "03f3a86d0447b56b5d088100002c750000007969696d7000",
         "sequence": 0
      }
   ],
   "vout": [
      {
         "value": 2.46277,
         "n": 0,
         "scriptPubKey": {
            "asm": "OP_DUP OP_HASH160 be2b394514fb004d27d168a893ba19fc1fc5b97a OP_EQUALVERIFY OP_CHECKSIG",
            "hex": "76a914be2b394514fb004d27d168a893ba19fc1fc5b97a88ac",
            "reqSigs": 1,
            "type": "pubkeyhash",
            "addresses": [
               "QdwWGyx6m7SsAnvqAaVwji9sXmeEmPzLEv"
            ]
         }
      },
      {
         "value": 1.23139,
         "n": 1,
         "scriptPubKey": {
            "asm": "OP_DUP OP_HASH160 df297fb547331c691d876ceefe21cec085606813 OP_EQUALVERIFY OP_CHECKSIG",
            "hex": "76a914df297fb547331c691d876ceefe21cec08560681388ac",
            "reqSigs": 1,
            "type": "pubkeyhash",
            "addresses": [
               "QgwxWU7xRWEVXnHyBqdgsEFDwjVVB75LyC"
            ]
         }
      }
   ],
   "blockhash": "00000000000c31d961f797a2a8a212b2c74a043ca61310d4b5a6233c50fa5e9e",
   "confirmations": 4,
   "time": 1567339845,
   "blocktime": 1567339845
}

no reward for masternode (block 7186673):

Code:

{
   "txid": "ef02c3e9cda9b5011eac41074f0c0705391d7a3a5ce3058bfb994f2bc7d78b42",
   "version": 1,
   "locktime": 0,
   "vin": [
      {
         "coinbase": "03f1a86d0416b56b5d0881000005792500007969696d7000",
         "sequence": 0
      }
   ],
   "vout": [
      {
         "value": 3.69416,
         "n": 0,
         "scriptPubKey": {
            "asm": "OP_DUP OP_HASH160 1993d4d26ea50fb09c1bce734f82ea581dc9d43e OP_EQUALVERIFY OP_CHECKSIG",
            "hex": "76a9141993d4d26ea50fb09c1bce734f82ea581dc9d43e88ac",
            "reqSigs": 1,
            "type": "pubkeyhash",
            "addresses": [
               "QNwE6bWzpNMMwdRLdw1Mr4wbBQFjN97aqb"
            ]
         }
      }
   ],
   "blockhash": "0000000000074c441bf0a3d203b068a0611fa3b76768eac92c8498e3c6c8e15b",
   "confirmations": 7,
   "time": 1567339798,
   "blocktime": 1567339798
}

Yes, there are very less MN rewards 

[ghzsymc2]

i just finish the code update in order to support the new wallet but i need someone to test it (redirect some hash power to it)

http://p2pool.e-pool.net:5860/static/

Hash power has been transferred to help you test

[ghzsymc2]

I dont understand why blockreward sometime contains mn-reward and sometime contains not.
Could someone please explain this behaviour?

2.46277 qrk for masternode (block 7186675):

Code:

{
   "txid": "9ed78d38cf4ca48af99484855fe1b48d0e5619b0ff2ae551da69853fa070e4aa",
   "version": 1,
   "locktime": 0,
   "vin": [
      {
         "coinbase": "03f3a86d0447b56b5d088100002c750000007969696d7000",
         "sequence": 0
      }
   ],
   "vout": [
      {
         "value": 2.46277,
         "n": 0,
         "scriptPubKey": {
            "asm": "OP_DUP OP_HASH160 be2b394514fb004d27d168a893ba19fc1fc5b97a OP_EQUALVERIFY OP_CHECKSIG",
            "hex": "76a914be2b394514fb004d27d168a893ba19fc1fc5b97a88ac",
            "reqSigs": 1,
            "type": "pubkeyhash",
            "addresses": [
               "QdwWGyx6m7SsAnvqAaVwji9sXmeEmPzLEv"
            ]
         }
      },
      {
         "value": 1.23139,
         "n": 1,
         "scriptPubKey": {
            "asm": "OP_DUP OP_HASH160 df297fb547331c691d876ceefe21cec085606813 OP_EQUALVERIFY OP_CHECKSIG",
            "hex": "76a914df297fb547331c691d876ceefe21cec08560681388ac",
            "reqSigs": 1,
            "type": "pubkeyhash",
            "addresses": [
               "QgwxWU7xRWEVXnHyBqdgsEFDwjVVB75LyC"
            ]
         }
      }
   ],
   "blockhash": "00000000000c31d961f797a2a8a212b2c74a043ca61310d4b5a6233c50fa5e9e",
   "confirmations": 4,
   "time": 1567339845,
   "blocktime": 1567339845
}

no reward for masternode (block 7186673):

Code:

{
   "txid": "ef02c3e9cda9b5011eac41074f0c0705391d7a3a5ce3058bfb994f2bc7d78b42",
   "version": 1,
   "locktime": 0,
   "vin": [
      {
         "coinbase": "03f1a86d0416b56b5d0881000005792500007969696d7000",
         "sequence": 0
      }
   ],
   "vout": [
      {
         "value": 3.69416,
         "n": 0,
         "scriptPubKey": {
            "asm": "OP_DUP OP_HASH160 1993d4d26ea50fb09c1bce734f82ea581dc9d43e OP_EQUALVERIFY OP_CHECKSIG",
            "hex": "76a9141993d4d26ea50fb09c1bce734f82ea581dc9d43e88ac",
            "reqSigs": 1,
            "type": "pubkeyhash",
            "addresses": [
               "QNwE6bWzpNMMwdRLdw1Mr4wbBQFjN97aqb"
            ]
         }
      }
   ],
   "blockhash": "0000000000074c441bf0a3d203b068a0611fa3b76768eac92c8498e3c6c8e15b",
   "confirmations": 7,
   "time": 1567339798,
   "blocktime": 1567339798
}

Yes, there are very less MN rewards 

Everything will be back to normal the day after tomorrow

[BlackDiamond37]

When the exchanges are upgraded wallets?

[amarian12]

I'm trying to update the p2pool code to support QRK Masternodes, but somehow I can't get it to work.... Any python experts here that can help???

Here i upload the code:  https://github.com/amarian12/p2pool-qrk-10.7.2

Thanks in advance for your help.....

[Smartjag]

Yes, there are very less MN rewards 
[/quote]

Everything will be back to normal the day after tomorrow
[/quote]

It's nice that you've informed us more now. But currently the yield of the Masternodes is far from good, especially as you need strong VPS. Let's hope that everything goes well again tomorrow.

[amarian12]

I am happy to announce that after few hard hours of tests and changes the code for p2pool is working perfect, anyone that want to mine QRK is welcome to our pool:

Code:

miner -a quark -o stratum+tcp://p2pool.e-pool.net:5860 -u YourWalletAddress -p password -s 1

webinfo

Code:

http://p2pool.e-pool.net:5860/static/

if you like to run your own p2pool node, the code is here:

Code:

https://github.com/amarian12/p2pool-qrk-10.7.2

For now 2.46277 qrk is assigned to the master node, the remaining 1.23139QRK is the miner's reward, distributed according to the strength of participation