The Blocks Factory - Multicoin pool

[skrzynip1]

mining at 6.5 th but only getting 4 th avarage. theblocksfactory shows 4 th valid and 2 th invalid. why is this happening?

[1715616796]

1715616796

[1715616796]

1715616796

[Cryptofi$h]

Any chance we can get pinkcoin added to a pool somewhere?  Just launched with a new algorithm...

https://t.co/8gkQ7n7Er0

[lucazane]

DIGIBYTE QUBIT POOL has been UPDATED

Please check your command line/config :

for ccminer :

ccminer.exe -q -a qubit -o stratum+tcp://s1.theblocksfactory.com:9000 -u Username.workername -p test 

for sgminer :

I don't have AMD card here, so if someone could post a working configuration.

[lucazane]

mining at 6.5 th but only getting 4 th avarage. theblocksfactory shows 4 th valid and 2 th invalid. why is this happening?

Try to set the difficulty manualy higer by adding _diffxxxxx at the end of your worker in your miner setting

[lucazane]

The worldcoin and the Imperialcoin will be removed the 1 may 2017, please withdraw your funds

[sunny77]

Hello,

I'm mining PXC with CCminer using your pool and I'm getting a lot of rejects for: share is above target. booooo

Any ideas on how to reduce this error and invalid hashrates?

Thx.

[Changeyourcoin]

Good I have 7 cards rx 480 AMD, could you tell me how is the payment system of this currency? , How can I configure the file to mine it? (Because I downloaded them but I do not know where to make the modifications)

[lucazane]

Good I have 7 cards rx 480 AMD, could you tell me how is the payment system of this currency? , How can I configure the file to mine it? (Because I
downloaded them but I do not know where to make the modifications)

What coin/algo ?

[Changeyourcoin]

Good I have 7 cards rx 480 AMD, could you tell me how is the payment system of this currency? , How can I configure the file to mine it? (Because I
downloaded them but I do not know where to make the modifications)

What coin/algo ?

I want to know how I can mine this coin?

With the 7 cards rx 480 me serve to mine?

How do I set them up to mine?

[duk3n]

Hi,
are The Blocks Factory Digibyte  pools, on all algos segwit ?

Thanks.

[MaxDZ8]

@Lucazane
Please remove link to my miner from 'getting started'. I haven't had any chance to work on in about one year and half and the project is completed. There won't be any new releases for this project and I would expect competition to have catched up by now.

Again, thank you for taking notice. But I'm just getting tired of the occasional emails I get in which I explain this over and over again so I guess I might write a line publicly.

[lucazane]

@Lucazane
Please remove link to my miner from 'getting started'. I haven't had any chance to work on in about one year and half and the project is completed. There won't be any new releases for this project and I would expect competition to have catched up by now.

Again, thank you for taking notice. But I'm just getting tired of the occasional emails I get in which I explain this over and over again so I guess I might write a line publicly.

done

[daberti]

New kid on FTC at TBF today. He also raised quite a bit the invalid share level.
It does NOT take a genius to understand it is a botnet.
Any admin there watching?

[Lordas]

PXC is calculated basing on 50 coins per block, but real is 25 coins per block.

[Kimarild1]

DIGIBYTE QUBIT POOL has been UPDATED

...
for ccminer :
ccminer.exe -q -a qubit -o stratum+tcp://s1.theblocksfactory.com:9000 -u Username.workername -p test 
...

I have been trying the line above and I have been trying this:
ccminer.exe --algo=myr-gr -o stratum+tcp://s1.theblocksfactory.com:9000 -u Username.workername -p test 

But my miner will not start.
Obviously Im doing something wrong, but I cant see it.

Im not getting any "Yes" or "boo" it simply just spams the line
myr-gr block 123123123, diff 1234,123


Could anymore help me?

[jeremys18]

I'm having the hardest time getting sgminer to work. It keeps crashing my computer every time I launch it.

I download sgminer like the getting started said (Groestl) and tried using the command it says but that doesn't work. sgminer doesn't do anything (opens then closes).


If I use the default setting config file and launch it it works but is slower than my $20 graphics card.

I have 2 graphics cards in my pc. 1 nvidia and 1 amd radeon rx 480. I want to use the rx480 since it's more powerful but it's also the one that I can't get working since sgminer won't run without defaults.

Here's my config file:

{
"pools" : [
   {
      "url" : "stratum.dgb-groestl.theblocksfactory.com:9003",
      "user" : "jeremys18.worker",
      "pass" : "xXx"
   }
]
,
"intensity" : "18",
"worksize" : "256",
"kernel" : "myriadcoin-groestl",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1-763",
"gpu-fan" : "1-100",
"gpu-memclock" : "1750",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}


Can someone help me? What settings should I be using for an AMD rx480?

[mantas779]

I'm having the hardest time getting sgminer to work. It keeps crashing my computer every time I launch it.

I download sgminer like the getting started said (Groestl) and tried using the command it says but that doesn't work. sgminer doesn't do anything (opens then closes).


If I use the default setting config file and launch it it works but is slower than my $20 graphics card.

I have 2 graphics cards in my pc. 1 nvidia and 1 amd radeon rx 480. I want to use the rx480 since it's more powerful but it's also the one that I can't get working since sgminer won't run without defaults.

Here's my config file:

{
"pools" : [
   {
      "url" : "stratum.dgb-groestl.theblocksfactory.com:9003",
      "user" : "jeremys18.worker",
      "pass" : "xXx"
   }
]
,
"intensity" : "18",
"worksize" : "256",
"kernel" : "myriadcoin-groestl",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1-763",
"gpu-fan" : "1-100",
"gpu-memclock" : "1750",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}


Can someone help me? What settings should I be using for an AMD rx480?

I have the same problem with my AMD RX470, gives me

 Started sgminer 5.0.1
[23:17:50] * using Jansson 2.7
[23:17:50] Loaded configuration file sgminer.conf
[23:17:50] No login credentials supplied for stratum.dgb-groestl.theblocksfactory.com


My bat file :  sgminer.exe -k myriadcoin-groestl -o stratum.dgb-groestl.theblocksfactory.com:9003 -u Mantas779.amd1 -p xXx -I 20


pause

I changed als the conf. file with the same sttings, seems to load the conf. file   


I am mining also with a GTX750 and GTX 660  with CCminer , went smooth right away??

[Kimarild1]

......


I am mining also with a GTX750 and GTX 660  with CCminer , went smooth right away??

Could you please tell me your bat file... I cant get ccminer to work properly.

[ghosting]

running ccminer  with my 1070 on skein all running sweet



ccminer.exe --algo=skein -o stratum+tcp://s1.theblocksfactory.com:9002 -u username.worker -p x

[mantas779]

......


I am mining also with a GTX750 and GTX 660  with CCminer , went smooth right away??

Could you please tell me your bat file... I cant get ccminer to work properly.

ccminer.exe --algo=myr-gr -o stratum+tcp://stratum.dgb-groestl.theblocksfactory.com:9003 -u worker.worker777 -p 1234