BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

[nomad1307]

hi biblepay,

can you unban my VPS please,thanks
appreciate it
my nick is

nomad1307-1 to nomad1307-5


god bless BBP

[bible_pay]

How many bpp required for a masternode? Is there a mn guide? Is there a discord?  Thanks. 

1,550,001.   
http://wiki.biblepay.org/Create_Sanctuary_2.   

Does anyone know any info behind the price increase?

We're at the very top of https://masternodes.pro/ .  This is the first day it has been up and listed there.  That probably has a lot to do with it.  Good move, Togo.

Unfortunately the info on there is incorrect. Number of coins required... someone have their contact details to sort it ASAP?

guys, do not buy this shit! Information on the masternodes.pro is not correct. You need 1500000 coins, not 6500. The developer is a fckn scammer!

Actually you need 1550001 coins. Obviously there was an error at the masternodes.pro end. It had nothing to do with the dev here.

The cost of a masternode has been very clear since the price was set at thanksgiving.

Perhaps you may like to fully research your next investment, rather than relying on information from a third-party website.

Error? What mistake? Dev intentionally sent the wrong information, to make pump.

no....dont believe this thing

SkyMaster have you any proof? cos on other side is this accusations very dangeours for coin

Hey Everyone, I got BiblePay listed on Masternodes.Pro on December 17th: http://forum.biblepay.org/index.php?topic=49.0

They never asked me how many BBP coins for sanctuary (masternode), they only ask you for links in the coin listing form,
they just recently re-did their website and probably got us mixed up with another coin,
I contacted all of them this morning on their Discord to let them know the masternode price is wrong.
Sorry for anyone who saw incorrect required coins.

The correct requirement has and always been listed on:
Bitcointalk Original Post: https://bitcointalk.org/index.php?topic=2388064.0
Reddit Sidebar and Post: https://www.reddit.com/r/BiblePay/ - https://www.reddit.com/r/BiblePay/comments/7g5wpx/masternode_sanctuary_price_set_1550001_bbp/
Wiki for Creating Masternode: http://wiki.biblepay.org/Create_Sanctuary_2 - http://wiki.biblepay.org/Create_Sanctuary
Twitter: https://twitter.com/BiblePay/status/938905696103526402

Thanks a lot Togo, looks like everyone rushed to coinsmarkets to buy since that is our only exchange with bitcoin deposits open.

Its a pity I dumped the orphanage wallet yesterday on ccex.

Its also a pity I took out my sells that were above the market a few days ago LOL.

[bible_pay]

hi biblepay,

can you unban my VPS please,thanks
appreciate it
my nick is

nomad1307-1 to nomad1307-5


god bless BBP

I did away with banning people, I gave up on it.  Its wide open.

Let me check your account.

EDIT: Nomad, you have solved work from every machine, so your stats should be updating already... 

[bible_pay]

BiblePay - 1.0.7.5
Leisure Upgrade


- Competetive mining feature:
  The idea behind competetive mining, is for those with fast processors who mine so fast that they run out of nonces,
  this feature automatically adds a tithe for the orphan foundation for a miniscule amount (IE 1 satoshi or .000001 bbp)
  IF you run out of mining nonces, and only increments to 2 satoshi again if you run out.  However, when the block changes,
  the amount is reset to 0 again.  Alex and I have tested this and it appears to give a 5% mining edge.  Therefore I wanted
  to release this as quickly as possible for general consumption.  Since it gives a mining edge, I made the feature ON by default.
  To turn it off add the key: competetivemining=false to your biblepay.conf file.

- Pool SSL Support (change pool=http:// to pool=https:// and remove poolport=80 in biblepay.conf file to use SSL).

[canopus11]

@oliwer why didnt buy MN,when your mine power is low .. ROI is very good for MN still .. you can still to buy it

edit:// price is  around 30 000$ ... what we remember,i knew guys which bought MN DASH for 75000$ and they are millionaires

[bible_pay]

Heres a funny comment:  If our price is rising because of masternodes.pro, its obviously due to people being interested in Sanctuary ROI.  (Not mining).  And anyone who read the old info, about 10% to the sanctuary that is now blessed with the new info (50% to sanctuary), I want you to realize that is a BLESSING for them.  In this case they were Underinformed, so the new information is a blessing in this case (since the updated split is Pro-sanctuary).

[inblue]

Jason from Masternodes.pro, talking about BiblePay on Discord:

Hey everyone
I will take a look at this. My Wallet Admin asked someone on your team about the cost as he kept finding conflicting information.
I guess they told him wrong i will fix it.

I wonder how did that happen, I'm 100% sure that Rob or someone like Togo or Alex wouldn't tell them the escrow amount is 6,250 coins, so who did they talk to, lol.

[canopus11]

@inblue how can built web for masternode and dont check ofc webs for every masternode coins?    admin of that site have to be lama

we have ofc almost 5 months webs for BIBLEPAY


wiki
forum.bbp
web
forum.btc

[jor777]

I don't understand, is it real ROI 24000% per year for now?!
6250 coins for MN?

[oliwer21]

@oliwer why didnt buy MN,when your mine power is low .. ROI is very good for MN still .. you can still to buy it

edit:// price is  around 30 000$ ... what we remember,i knew guys which bought MN DASH for 75000$ and they are millionaires

Answer is simple... its huge amount for me... if you can you can sponsor me and i'll give it back just after minners "share" with me after their cpus hard work.
I'am simple guy who only want to mine some coins and help oprhans.
As i said. I stoped minning after mn start. Sometimes i run wallet to check if new ver has some minning improvments(i think devs are ok now with running with multiwallet on one rig)

[oliwer21]

I don't understand, is it real ROI 24000% per year for now?!
6250 coins for MN?

Mn costs 1,5mln bbp.

[bible_pay]

I don't understand, is it real ROI 24000% per year for now?!
6250 coins for MN?

No, its more like 100% roi realistically, as its hard to grab 1.5 Million coins from the open exchange, its more like $12,000 for a sanctuary - and the roi is dropping each hour- we have 20 new sanctuaries today.

I expect 250 sanctuaries in a few months then it will slow down as will then require the institutions to buy sanctuaries.  And they will.. Its a fallacy to think they wont.

[togoshigekata]

Jason from Masternodes.pro, talking about BiblePay on Discord:

Hey everyone
I will take a look at this. My Wallet Admin asked someone on your team about the cost as he kept finding conflicting information.
I guess they told him wrong i will fix it.

I wonder how did that happen, I'm 100% sure that Rob or someone like Togo or Alex wouldn't tell them the escrow amount is 6,250 coins, so who did they talk to, lol.

The admin jason has updated the required coins:  https://masternodes.pro/
Though note, only 15 sanctuaries are showing since he said the rest are in Watchdog Expired state,
maybe he has an old version of watchman or is out of sync? I assume they will need to udpate sanctuary every time we update?

Im still not sure who his teammate contacted, last I talked with them was 2 weeks ago to pay the Bitcoin fee for listing, he said in his research he had the correct number, but his teammate was told a different number by someone, weird.

This is Masternodes.Pro Discord link:  https://discordapp.com/invite/ju5AbMx

[togoshigekata]

BiblePay - 1.0.7.5
Leisure Upgrade


- Competetive mining feature:
  The idea behind competetive mining, is for those with fast processors who mine so fast that they run out of nonces,
  this feature automatically adds a tithe for the orphan foundation for a miniscule amount (IE 1 satoshi or .000001 bbp)
  IF you run out of mining nonces, and only increments to 2 satoshi again if you run out.  However, when the block changes,
  the amount is reset to 0 again.  Alex and I have tested this and it appears to give a 5% mining edge.  Therefore I wanted
  to release this as quickly as possible for general consumption.  Since it gives a mining edge, I made the feature ON by default.
  To turn it off add the key: competetivemining=false to your biblepay.conf file.

- Pool SSL Support (change pool=http:// to pool=https:// and remove poolport=80 in biblepay.conf file to use SSL).

[seeksilence1]

Still stuck with these errors from watchman (in fact exactly the same as it was yesterday).. Rebooted the MN, restarted the daemon, watched it sync up correctly, but still these on running watchman manually..

Code:

Traceback (most recent call last):
  File "bin/watchman.py", line 244, in <module>
    main()
  File "bin/watchman.py", line 191, in main
    perform_biblepayd_object_sync(biblepayd)
  File "bin/watchman.py", line 24, in perform_biblepayd_object_sync
    GovernanceObject.sync(biblepayd)
  File "lib/models.py", line 87, in sync
    (go, subobj) = self.import_gobject_from_biblepayd(biblepayd, item)
  File "lib/models.py", line 117, in import_gobject_from_biblepayd
    object_hex = biblepaylib.SHIM_deserialise_from_biblepayd(object_hex)
  File "lib/biblepaylib.py", line 204, in SHIM_deserialise_from_biblepayd
    obj = deserialise(biblepayd_hex)
  File "lib/biblepaylib.py", line 229, in deserialise
    obj = simplejson.loads(json, use_decimal=True)
  File "/root/.biblepaycore/watchman/venv/local/lib/python2.7/site-packages/simplejson/__init__.py", line 533, in loads
    return cls(encoding=encoding, **kw).decode(s)
  File "/root/.biblepaycore/watchman/venv/local/lib/python2.7/site-packages/simplejson/decoder.py", line 370, in decode
    obj, end = self.raw_decode(s)
  File "/root/.biblepaycore/watchman/venv/local/lib/python2.7/site-packages/simplejson/decoder.py", line 400, in raw_decode
    return self.scan_once(s, idx=_w(s, idx).end())
simplejson.scanner.JSONDecodeError: Expecting property name enclosed in double quotes: line 1 column 1673 (char 1672)

No rest for us Christians... OK, will check in an hour or so... We need to announce a leisure release...

I have this problem but right now it is OK.

[togoshigekata]

"When will letters begin to be sent once more?
It seems the last of them were sent toward the beginning of December.

If we increase user input on their approval and decrease the total bounty per letter,
I'm sure we could provide the orphans with many more kind letters.
I for one would love to write some letters every morning as I wake up
and just before bed so long as they are sent within a few hours (maybe even a day).

Otherwise I could just be sending them via plain pen and paper." -bt623
https://www.reddit.com/r/BiblePay/comments/7nmxam/letter_sending/

[bible_pay]

"When will letters begin to be sent once more?
It seems the last of them were sent toward the beginning of December.

If we increase user input on their approval and decrease the total bounty per letter,
I'm sure we could provide the orphans with many more kind letters.
I for one would love to write some letters every morning as I wake up
and just before bed so long as they are sent within a few hours (maybe even a day).

Otherwise I could just be sending them via plain pen and paper." -bt623
https://www.reddit.com/r/BiblePay/comments/7nmxam/letter_sending/

I run this job every two weeks (to send the letters to the translators) however with the last two emergencies, I havent been able to do it, but I will definitely run it within 24 hours, after we take a look at Watchman today.

[bitcoinbox.win]

Where is pool? How to minig?

[togoshigekata]

Where is pool? How to minig?

https://www.reddit.com/r/BiblePay/comments/6umlqq/how_to_mine_biblepay_on_windows/
https://www.reddit.com/r/BiblePay/comments/6ummuj/how_to_mine_biblepay_on_linux/

[bible_pay]

Still stuck with these errors from watchman (in fact exactly the same as it was yesterday).. Rebooted the MN, restarted the daemon, watched it sync up correctly, but still these on running watchman manually..

Code:

Traceback (most recent call last):
  File "bin/watchman.py", line 244, in <module>
    main()
  File "bin/watchman.py", line 191, in main
    perform_biblepayd_object_sync(biblepayd)
  File "bin/watchman.py", line 24, in perform_biblepayd_object_sync
    GovernanceObject.sync(biblepayd)
  File "lib/models.py", line 87, in sync
    (go, subobj) = self.import_gobject_from_biblepayd(biblepayd, item)
  File "lib/models.py", line 117, in import_gobject_from_biblepayd
    object_hex = biblepaylib.SHIM_deserialise_from_biblepayd(object_hex)
  File "lib/biblepaylib.py", line 204, in SHIM_deserialise_from_biblepayd
    obj = deserialise(biblepayd_hex)
  File "lib/biblepaylib.py", line 229, in deserialise
    obj = simplejson.loads(json, use_decimal=True)
  File "/root/.biblepaycore/watchman/venv/local/lib/python2.7/site-packages/simplejson/__init__.py", line 533, in loads
    return cls(encoding=encoding, **kw).decode(s)
  File "/root/.biblepaycore/watchman/venv/local/lib/python2.7/site-packages/simplejson/decoder.py", line 370, in decode
    obj, end = self.raw_decode(s)
  File "/root/.biblepaycore/watchman/venv/local/lib/python2.7/site-packages/simplejson/decoder.py", line 400, in raw_decode
    return self.scan_once(s, idx=_w(s, idx).end())
simplejson.scanner.JSONDecodeError: Expecting property name enclosed in double quotes: line 1 column 1673 (char 1672)

No rest for us Christians... OK, will check in an hour or so... We need to announce a leisure release...

I have this problem but right now it is OK.

It looks like most of the problem is all of the sancs that didnt vote yesterday still have the old budget in the watchman database.
Im not seeing this error on all sancs that I voted for Delete on.

If you have this error please do the following:

gobject vote-many 3f22267e91222c6d761f8a83d781a0adfe833c3b42b790a0990abfb2a5923942 funding no

gobject vote-many 3f22267e91222c6d761f8a83d781a0adfe833c3b42b790a0990abfb2a5923942 delete yes


From your controllers, then, delete mn*.dat, rm gov*.dat and resync your sanctuary and controller and see if the object goes away (gobject list all triggers should only show 1 trigger, not 2).

The correct budget and trigger gobject id that we want to keep is:  4a1f347cd49a97d36f105b1908d33a3ed3cfb5d11485000d2908313f4c2d9490
gobject get 4a1f347cd49a97d36f105b1908d33a3ed3cfb5d11485000d2908313f4c2d9490