|
616westwarmoth
|
|
January 02, 2018, 08:41:29 PM |
|
Yes, the owners contacted me and asked if we were ready. I asked for a price quote, and they shot me a better number, so I jumped on it from my own funds. When I get my allotted payment for the proposal, we'll have to deal with the sticky issue of what to do with the excess. My thoughts have been this. If the cost had gone up, I would have paid the extra from my own funds (if possible) and then asked to be reimbursed in the next cycle. Since the cost has gone down (due to the increase in value in the last few days), I should have a good amount of extra. My thought is since I would expect to be reimbursed, this excess belongs to the community and should be sent to the Orphan Fund address.
|
|
|
|
616westwarmoth
|
|
January 02, 2018, 08:45:24 PM |
|
1. In control wallet gobject vote-many 3f22267e91222c6d761f8a83d781a0adfe833c3b42b790a0990abfb2a5923942 funding no gobject vote-many 3f22267e91222c6d761f8a83d781a0adfe833c3b42b790a0990abfb2a5923942 delete yes close wallet and delete mn*.dat, rm gov*.dat 2. In masternode, run biblepay-cli gobject list all triggers to check if it has just one trigger. If not, restart the masternode 3. Start the control wallet and unlock it, then masternode start-alias SANCTUARY_ALIAS 4. Check if it is synced in control wallet: mnsync status ("AssetID": 999 means synced) 5. In control wallet, run: gobject list all triggers if you see two triggers, then do close wallet and delete mn*.dat, rm gov*.dat and wait a few minutes and start wallet 6. In masternode, run venv/bin/python bin/watchman.py under the watchdog dir to check.
I had to delete the mn*.dat and gov*.dat at the Masternode as well as the Controlling wallet to get this to take. And now I'm getting the same error again.
|
|
|
|
zer01112
Newbie
Offline
Activity: 16
Merit: 0
|
|
January 02, 2018, 08:46:10 PM |
|
That is really nice!! (That Biblepay is listed on masternode.online)
|
|
|
|
svirusxxx2
Jr. Member
Offline
Activity: 89
Merit: 7
|
|
January 02, 2018, 08:51:17 PM |
|
And now I'm getting the same error again.
I deleted it many times, trying to resync , delete watchman database, and still have this problem, and my node is PRE_ENABLED on my node, and other nodes listed it as WATCHDOG_EXPIRED also I see many WATCHDOG_EXPIRED (about 24)
|
Biblepay masternodes status and monitoring (https://biblepay.eu/)
|
|
|
znffal
|
|
January 02, 2018, 08:57:54 PM Last edit: January 02, 2018, 09:11:20 PM by znffal |
|
BiblePay - 1.0.7.5 Leisure Upgrade
- Competetive mining feature: The idea behind competetive mining, is for those with fast processors who mine so fast that they run out of nonces, this feature automatically adds a tithe for the orphan foundation for a miniscule amount (IE 1 satoshi or .000001 bbp) IF you run out of mining nonces, and only increments to 2 satoshi again if you run out. However, when the block changes, the amount is reset to 0 again. Alex and I have tested this and it appears to give a 5% mining edge. Therefore I wanted to release this as quickly as possible for general consumption. Since it gives a mining edge, I made the feature ON by default. To turn it off add the key: competetivemining=false to your biblepay.conf file.
- Pool SSL Support (change pool=http:// to pool=https:// and remove poolport=80 in biblepay.conf file to use SSL).
Do we have to change the conf file? Or is it just an option?
|
|
|
|
seeksilence1
Newbie
Offline
Activity: 86
Merit: 0
|
|
January 02, 2018, 09:01:08 PM |
|
And now I'm getting the same error again.
I deleted it many times, trying to resync , delete watchman database, and still have this problem, and my node is PRE_ENABLED on my node, and other nodes listed it as WATCHDOG_EXPIRED also I see many WATCHDOG_EXPIRED (about 24) Just tested mine. No problem found.
|
|
|
|
ooeygooeygold
|
|
January 02, 2018, 09:04:20 PM |
|
my wallet isn't syncing can someone help me fix please
linux or windows? in win try rebuild westwarmoth question why did rm gove+mn.dat? for what? in windows is there a way to rebuild without reinstalling?
|
|
|
|
svirusxxx2
Jr. Member
Offline
Activity: 89
Merit: 7
|
|
January 02, 2018, 09:23:37 PM |
|
And now I'm getting the same error again.
I deleted it many times, trying to resync , delete watchman database, and still have this problem, and my node is PRE_ENABLED on my node, and other nodes listed it as WATCHDOG_EXPIRED also I see many WATCHDOG_EXPIRED (about 24) Just tested mine. No problem found. ok I try to debug this.. 1996fe78ce9efd7a3b6deefbcd2e120b75f850909ad8f702062a517b1cb27ae1 have problem with data: "DataString": "[[\"trigger\",{\"event_block_height\":24600,\"payment_addresses\":\"BC99kkb2mvz6SRdAVYRsgKaoWeuYavYLUT|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW|BGdV31j9w9yM5CrCnsUsUyFZkwhAsDyDP3|BAqBZkMieZfES9LkVgcMmMPv3E68tZt9G8|BKPGxUJvi82hi7RA3gmPUT8a9tASjtrsMF|BP8BCkDc411a25KjsD2k9tRCWKLjGQFCGz|BAqBZkMieZfES9LkVgcMmMPv3E68tZt9G8|BB57LvFhNhYAeD8JSHTnQTmiKRYx4DkxG7|BB2BwSbDCqCqNsfc7FgWFJn4sRgnUt4tsM|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW\",\"payment_amounts\":\"250.0000|135000.0000|23171.0000|47203.0000|517000.0000|89320.0000|2894609.0000|867333.0000|16692.0000|312500.0000|125000.0000|186493.0000|400000.0000|42272.0000\",\"proposal_hashes\":\"8aee1d9574677f7c5030571d6244769ff17e9c1c91d3c36bcdfc883a817dc0d7|e6ff30af51064a281752a6b5fdc03bd9d2fa457af89e1a0021a93661a726c96e|664f6ebfb9de9c448f986dd266db259bf89d5b6ca1ca82af7d37eee4212a3f98|13d938defec6e110ef0df251654c544d5dc9c57cf015a1ea8bb60538899b5643|46e3ee892800b272a8fa44cf4eda13506c73c297c1bc4773a0b718e7f200b4d3|9b9b0c95d2390dcf8f6bdb3f30bb02a3bf8b8e2c83bf3ccf154cd337345e8835|23f3af5b2b93d57bb5319d6c01ec98c9b2f5ca40628311c5054841295360c679|5ec1b8496385159ae913b6341719ebab199c680305a02d87a3a69dc7b84a0563|3629e6cce8a71ade8fcd9a83e9566efce479f0a3562314aa71ae5446497e07cc|da0c60fd9de6aac40b1425aca56c200f4b0665f3196c060fe443c00061dbd4ab|fbdde6d5297525ea2f9732df0858068b1a76f953a7f3d68873c298bf5d6afd20|df3815d09091445c1ce839e7cd29f995abf117837d74525da866b51bbdb7bc16|ab354293e413459c42d52a1511d5351a7a900c2c97cd4c81b6bbf261a196d0c2|ed9ec4a65237b7d54f1766dffe39f1fb18cbc99783c3495fb927610f3c3620a1\",\"type\":2,}]]",
at end is ...\"type\": 2,}]]" this "comma" breaking python json decoder.
|
Biblepay masternodes status and monitoring (https://biblepay.eu/)
|
|
|
hvdb
Newbie
Offline
Activity: 17
Merit: 0
|
|
January 02, 2018, 09:34:06 PM |
|
BiblePay - 1.0.7.5 Leisure Upgrade
- Competetive mining feature: The idea behind competetive mining, is for those with fast processors who mine so fast that they run out of nonces, this feature automatically adds a tithe for the orphan foundation for a miniscule amount (IE 1 satoshi or .000001 bbp) IF you run out of mining nonces, and only increments to 2 satoshi again if you run out. However, when the block changes, the amount is reset to 0 again. Alex and I have tested this and it appears to give a 5% mining edge. Therefore I wanted to release this as quickly as possible for general consumption. Since it gives a mining edge, I made the feature ON by default. To turn it off add the key: competetivemining=false to your biblepay.conf file.
- Pool SSL Support (change pool=http:// to pool=https:// and remove poolport=80 in biblepay.conf file to use SSL).
Do we have to change the conf file? Or is it just an option? it's an option, but I would change it if I where you
|
|
|
|
svirusxxx2
Jr. Member
Offline
Activity: 89
Merit: 7
|
|
January 02, 2018, 10:03:22 PM |
|
And now I'm getting the same error again.
I deleted it many times, trying to resync , delete watchman database, and still have this problem, and my node is PRE_ENABLED on my node, and other nodes listed it as WATCHDOG_EXPIRED also I see many WATCHDOG_EXPIRED (about 24) Just tested mine. No problem found. ok I try to debug this.. 1996fe78ce9efd7a3b6deefbcd2e120b75f850909ad8f702062a517b1cb27ae1 have problem with data: "DataString": "[[\"trigger\",{\"event_block_height\":24600,\"payment_addresses\":\"BC99kkb2mvz6SRdAVYRsgKaoWeuYavYLUT|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW|BGdV31j9w9yM5CrCnsUsUyFZkwhAsDyDP3|BAqBZkMieZfES9LkVgcMmMPv3E68tZt9G8|BKPGxUJvi82hi7RA3gmPUT8a9tASjtrsMF|BP8BCkDc411a25KjsD2k9tRCWKLjGQFCGz|BAqBZkMieZfES9LkVgcMmMPv3E68tZt9G8|BB57LvFhNhYAeD8JSHTnQTmiKRYx4DkxG7|BB2BwSbDCqCqNsfc7FgWFJn4sRgnUt4tsM|BNKh6Z8tKaEToFyQzcffgsR9gssjeCMZLW\",\"payment_amounts\":\"250.0000|135000.0000|23171.0000|47203.0000|517000.0000|89320.0000|2894609.0000|867333.0000|16692.0000|312500.0000|125000.0000|186493.0000|400000.0000|42272.0000\",\"proposal_hashes\":\"8aee1d9574677f7c5030571d6244769ff17e9c1c91d3c36bcdfc883a817dc0d7|e6ff30af51064a281752a6b5fdc03bd9d2fa457af89e1a0021a93661a726c96e|664f6ebfb9de9c448f986dd266db259bf89d5b6ca1ca82af7d37eee4212a3f98|13d938defec6e110ef0df251654c544d5dc9c57cf015a1ea8bb60538899b5643|46e3ee892800b272a8fa44cf4eda13506c73c297c1bc4773a0b718e7f200b4d3|9b9b0c95d2390dcf8f6bdb3f30bb02a3bf8b8e2c83bf3ccf154cd337345e8835|23f3af5b2b93d57bb5319d6c01ec98c9b2f5ca40628311c5054841295360c679|5ec1b8496385159ae913b6341719ebab199c680305a02d87a3a69dc7b84a0563|3629e6cce8a71ade8fcd9a83e9566efce479f0a3562314aa71ae5446497e07cc|da0c60fd9de6aac40b1425aca56c200f4b0665f3196c060fe443c00061dbd4ab|fbdde6d5297525ea2f9732df0858068b1a76f953a7f3d68873c298bf5d6afd20|df3815d09091445c1ce839e7cd29f995abf117837d74525da866b51bbdb7bc16|ab354293e413459c42d52a1511d5351a7a900c2c97cd4c81b6bbf261a196d0c2|ed9ec4a65237b7d54f1766dffe39f1fb18cbc99783c3495fb927610f3c3620a1\",\"type\":2,}]]",
at end is ...\"type\": 2,}]]" this "comma" breaking python json decoder. ok ... I add replace to this string to fix json, but also I have many errors like this: 2018-01-02 21:53:06 Invalid Proposal name [First Prod Proposal] (does not match regex), returning False 2018-01-02 21:53:06 No proposals, cannot create an empty superblock. 2018-01-02 21:53:06 No superblock created, sorry. Returning.
this is normal ? I today try to run first time masternode, and everythings looks ok biblepay-cli masternode status { "vin": "CTxIn(COutPoint(f96df9063af005b942f5cb62844d0360567930d145bde7430c740b8a6c221fe3, 1), scriptSig=)", "service": "137.74.0.113:40000", "payee": "BBauqhusvhQJcjBZHgrC6r1eN5xc4DHqy7", "status": "Masternode successfully started" }
I don't know how to make watchman working :/
|
Biblepay masternodes status and monitoring (https://biblepay.eu/)
|
|
|
Alex873434
Member
Offline
Activity: 98
Merit: 10
|
|
January 02, 2018, 10:37:44 PM |
|
BiblePay - 1.0.7.5 Leisure Upgrade
- Competetive mining feature: The idea behind competetive mining, is for those with fast processors who mine so fast that they run out of nonces, this feature automatically adds a tithe for the orphan foundation for a miniscule amount (IE 1 satoshi or .000001 bbp) IF you run out of mining nonces, and only increments to 2 satoshi again if you run out. However, when the block changes, the amount is reset to 0 again. Alex and I have tested this and it appears to give a 5% mining edge. Therefore I wanted to release this as quickly as possible for general consumption. Since it gives a mining edge, I made the feature ON by default. To turn it off add the key: competetivemining=false to your biblepay.conf file.
- Pool SSL Support (change pool=http:// to pool=https:// and remove poolport=80 in biblepay.conf file to use SSL).
Do we have to change the conf file? Or is it just an option? Default is enabled. You can turn it off by adding competetivemining=false in biblepay.conf (if you were talking about that).
|
|
|
|
immakingacoin
Member
Offline
Activity: 98
Merit: 11
|
|
January 03, 2018, 12:07:54 AM |
|
This is interesting. I have created the first Hindu Coin, and am Currently doing the ICO on Facebook and other Social Media, rather than on Bitcointalk. And I will be announcing Temple Coin on January 20th.
But I am interested in this.
I want to help people understand Ancient Books better. I have been a Certified/Ordained Hindu Minister since I was 17 (and Hindu since I was 14), but even as a Hindu, I have a deep understanding of the Bible.
I first read the Bible when I was 14 years old (which is why I left the Religion; everyone should go read that whole Book, and compare it to similar Books), and I read it from front to back. I know where everyone is in the Bible, you can find David is Saul for example, there are also other Books of the Bible in the Catholic: Apocrypha, and the Gnostic: Nag Hamadi Scriptures; and if you want to read the Regular Bible in great Detail, go to "BlueLetterBible.com" it creates a link for every single word in the Bible, allowing you to do all kinds of searches and look at what they are saying in multiple languages. It is similar to how "Red Letter Bibles" underline Jesus' words in Red, this is the Bible with Links.
Now, the following is a Quote, first a Quote that is not Benjamin Franklin, but is actually a Quote in his writings where he is Quoting someone else, and then right after that are his words.
“In old Time it was no disrespect for Men and Women to be call’d by their own Names: Adam, was never called Master Adam; we never read of Noah Esquire, Lot Knight and Baronet, nor the Right Honourable Abraham, Viscount Mesopotamia, Baron of Carran; no, they were plain Men, honest Country Grasiers, that took Care of their Families and their Flocks. Moses was a great Prophet, and Aaron a Priest of the Lord; but we never read of the Reverend Moses, nor the Right Reverend Father in God, Aaron, by Divine Providence, Lord Arch-Bishop of Israel: Thou never sawest Madam Rebecca in the Bible, my Lady Rachel, nor Mary, tho’ a Princess of the Blood after the Death of Joseph, call’d the Princess Dowager of Nazareth; no, plain Rebecca, Rachel, Mary, or the Widow Mary, or the like: It was no Incivility then to mention their naked Names as they were expressed.”
If common civility, and a generous Deportment among Mankind, be not put out of Countenance by the profound Reasoning of this Author, we hope they will continue to treat one another handsomely to the end of the World. We will not pretend an Answer to these Arguments against modern Decency and Titles of Honour; yet one of our Club will undertake to prove, that tho’ Abraham was not styl’d Right Honourable, yet he had the Title of Lord given him by his Wife Sarah, which he thinks entitles her to the Honour of My Lady Sarah; and Rachel being married into the same Family, he concludes she may deserve the Title of My Lady Rachel. But this is but the Opinion of one Man; it was never put to Vote in the Society.
|
|
|
|
Jaze360
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 03, 2018, 12:35:43 AM |
|
Hello,
I'm having some issues with the miner at this moment and i'm at whit's end.
It was working just fine this afternoon ( when i started). Suddenly i can see that the wallet is still mining and my balance is unchanged. My worker is having recorded Hashps in the pool as well as in the mininginfo. After a couple of minutes, it stops adding coins to my balance. If i create a new worker it works again for a couple of minutes and then the same thing happens, i get no errors nor any signs what could be wrong. Please help me out here.
Thank you.
|
|
|
|
togoshigekata
|
|
January 03, 2018, 01:28:57 AM |
|
"jaapgvk 3 points 6 hours ago I'm not sure, but since BBP is partly based on bitcoin, there is a way in which the bitcoin qt-wallet works that doesn't give you 100% certainty that only making a wallet.dat backup once is enough on the long run. See this explanation: Preventing and Recovering from Change Address Disasters. Incorrect use of Bitcoin change addresses account for many cases of loss or theft of funds. Here are some disaster scenarios and ways to avoid them. 1. Backup Failure Alice uses Bitcoin-Qt. Understanding the importance of backups, she created an encrypted wallet backup long ago and stored it in a safe place. After making dozens of transactions with Bitcoin-Qt, Alice’s hard drive crashed. Alice bought a new hard drive and then re-installed Bitcoin-Qt on it. She then restored her wallet backup. To her horror, Alice discovered the restored wallet was empty. Explanation: Alice generated enough change addresses to overflow the original pool of 100. On the 100th spending transaction, Bitcoin-Qt moved Alice’s change (which happend to be her entire balance) into an address not in the backup. Restoring the backup only restored empty addresses. Recovery: Even if a hard drive can’t boot an operating system, individual files can still be recovered. Using data recovery tools, Alice may be able to salvage the Bitcoin-Qt wallet from the faulty hard drive, and with it her lost funds. Prevention: Count the number of manually-created addresses and spending transactions since your last backup. If this number is greater than about 80, back up again. Weekly backups might be enough for most users. Set a very high value (e.g., 10,000) for the -keypool option, either as a command line parameter, or in the bitcoin.conf file. Switch to a deterministic wallet. https://bitzuma.com/posts/five-ways-to-lose-money-with-bitcoin-change-addresses/" === jaavpgvk also has fantastic advice! Ive heard about this 100 thing but wasnt sure, Could your provide any details on this 100 transaction functionality Rob? Can anyone teach me more about this keypool thing? Im worried about my private keys rotating/being reset and my backups of my wallet.dat in other locations becoming worthless. Especially now that I am receiving daily payments from my Sanctuary.
|
|
|
|
bible_pay (OP)
Full Member
Offline
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
|
|
January 03, 2018, 01:39:28 AM Last edit: January 03, 2018, 01:50:52 AM by bible_pay |
|
Yes, the owners contacted me and asked if we were ready. I asked for a price quote, and they shot me a better number, so I jumped on it from my own funds. When I get my allotted payment for the proposal, we'll have to deal with the sticky issue of what to do with the excess. My thoughts have been this. If the cost had gone up, I would have paid the extra from my own funds (if possible) and then asked to be reimbursed in the next cycle. Since the cost has gone down (due to the increase in value in the last few days), I should have a good amount of extra. My thought is since I would expect to be reimbursed, this excess belongs to the community and should be sent to the Orphan Fund address. No, in my opinion we dont have to worry about that. I think a proposal is a proposal. I dont expect Togo to give his money back if we rise and I dont expect him to be reimbursed more if we drop. Imagine payroll for the circus at biblepay where every 2 weeks we re-pay the "remains" from the prior payroll cycle. EDIT: I think we should put a disclaimer on the system to not put proposals in unless you have the wherewithal to take the appropriate risk.
|
|
|
|
hkalvin
Newbie
Offline
Activity: 27
Merit: 0
|
|
January 03, 2018, 01:59:02 AM Last edit: January 03, 2018, 02:20:56 AM by hkalvin |
|
BiblePay - 1.0.7.5 Leisure Upgrade
- Competetive mining feature: The idea behind competetive mining, is for those with fast processors who mine so fast that they run out of nonces, this feature automatically adds a tithe for the orphan foundation for a miniscule amount (IE 1 satoshi or .000001 bbp) IF you run out of mining nonces, and only increments to 2 satoshi again if you run out. However, when the block changes, the amount is reset to 0 again. Alex and I have tested this and it appears to give a 5% mining edge. Therefore I wanted to release this as quickly as possible for general consumption. Since it gives a mining edge, I made the feature ON by default. To turn it off add the key: competetivemining=false to your biblepay.conf file.
- Pool SSL Support (change pool=http:// to pool=https:// and remove poolport=80 in biblepay.conf file to use SSL).
Is it have a problem?I found some upgraded PC can't running bbp process , but old version still running normal.... I tried to reboot or change dns, and changed back to port80 but it seem not work.. quote: # Error: Error: A fatal internal error occurred, see debug.log for details Error: Failed to connect best block
|
|
|
|
bible_pay (OP)
Full Member
Offline
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
|
|
January 03, 2018, 02:02:34 AM |
|
This is interesting. I have created the first Hindu Coin, and am Currently doing the ICO on Facebook and other Social Media, rather than on Bitcointalk. And I will be announcing Temple Coin on January 20th.
But I am interested in this.
I want to help people understand Ancient Books better. I have been a Certified/Ordained Hindu Minister since I was 17 (and Hindu since I was 14), but even as a Hindu, I have a deep understanding of the Bible.
I first read the Bible when I was 14 years old (which is why I left the Religion; everyone should go read that whole Book, and compare it to similar Books), and I read it from front to back. I know where everyone is in the Bible, you can find David is Saul for example, there are also other Books of the Bible in the Catholic: Apocrypha, and the Gnostic: Nag Hamadi Scriptures; and if you want to read the Regular Bible in great Detail, go to "BlueLetterBible.com" it creates a link for every single word in the Bible, allowing you to do all kinds of searches and look at what they are saying in multiple languages. It is similar to how "Red Letter Bibles" underline Jesus' words in Red, this is the Bible with Links.
Now, the following is a Quote, first a Quote that is not Benjamin Franklin, but is actually a Quote in his writings where he is Quoting someone else, and then right after that are his words.
“In old Time it was no disrespect for Men and Women to be call’d by their own Names: Adam, was never called Master Adam; we never read of Noah Esquire, Lot Knight and Baronet, nor the Right Honourable Abraham, Viscount Mesopotamia, Baron of Carran; no, they were plain Men, honest Country Grasiers, that took Care of their Families and their Flocks. Moses was a great Prophet, and Aaron a Priest of the Lord; but we never read of the Reverend Moses, nor the Right Reverend Father in God, Aaron, by Divine Providence, Lord Arch-Bishop of Israel: Thou never sawest Madam Rebecca in the Bible, my Lady Rachel, nor Mary, tho’ a Princess of the Blood after the Death of Joseph, call’d the Princess Dowager of Nazareth; no, plain Rebecca, Rachel, Mary, or the Widow Mary, or the like: It was no Incivility then to mention their naked Names as they were expressed.”
If common civility, and a generous Deportment among Mankind, be not put out of Countenance by the profound Reasoning of this Author, we hope they will continue to treat one another handsomely to the end of the World. We will not pretend an Answer to these Arguments against modern Decency and Titles of Honour; yet one of our Club will undertake to prove, that tho’ Abraham was not styl’d Right Honourable, yet he had the Title of Lord given him by his Wife Sarah, which he thinks entitles her to the Honour of My Lady Sarah; and Rachel being married into the same Family, he concludes she may deserve the Title of My Lady Rachel. But this is but the Opinion of one Man; it was never put to Vote in the Society.
- A new age deception - Hundreds of "valid" gods, yet no most high God - Each of these gods rules a pricipality in Hell, and denies that Jesus is Lord - The God of Abraham, Isaac & Jacob is the true most-high God, says those witnesses who had NDEs and toured heaven and hell - The NKJV bible was written by a divine creator, with the help of the Holy Spirit by the scribes - Only the Power of Jesus can truly heal - You will excel in this world by following false Gods, because they gain their power from the beast - Christianity is a story of Love, Vedas offers new age replacement theology that man becomes like God, but you must repent and humble yourself to be worthy of Heaven - Please pray for those that are deceived, that a sign be given to them now in the name of Yeshua
|
|
|
|
hkalvin
Newbie
Offline
Activity: 27
Merit: 0
|
|
January 03, 2018, 02:57:42 AM |
|
BiblePay - 1.0.7.5 Leisure Upgrade
- Competetive mining feature: The idea behind competetive mining, is for those with fast processors who mine so fast that they run out of nonces, this feature automatically adds a tithe for the orphan foundation for a miniscule amount (IE 1 satoshi or .000001 bbp) IF you run out of mining nonces, and only increments to 2 satoshi again if you run out. However, when the block changes, the amount is reset to 0 again. Alex and I have tested this and it appears to give a 5% mining edge. Therefore I wanted to release this as quickly as possible for general consumption. Since it gives a mining edge, I made the feature ON by default. To turn it off add the key: competetivemining=false to your biblepay.conf file.
- Pool SSL Support (change pool=http:// to pool=https:// and remove poolport=80 in biblepay.conf file to use SSL).
Is it have a problem?I found some upgraded PC can't running bbp process , but old version still running normal.... I tried to reboot or change dns, and changed back to port80 but it seem not work.. quote: # Error: Error: A fatal internal error occurred, see debug.log for details Error: Failed to connect best block After that, I did below step to test again , and successfully resumed to normal now. cd ~/.biblepaycore rm blocks -R rm chainstate -R rm banlist.dat rm fee_estimates.dat rm governance.dat rm mncache.dat rm mnpayments.dat rm netfulfilled.dat rm peers.dat reindex it after deleted these archive
|
|
|
|
jaapgvk
|
|
January 03, 2018, 03:53:35 AM |
|
how can we work on getting this on more exchanges, im interested in working with the team but i mainly use reddit or fb i hate the set up of this forum, started my wallet a few days ago built up 137 coins so far, should i just turn the mining off is it going to burn my laptop? BJXqCYeH58K788bq67VC5jyHXi8MYnjNoY
In my experience it won't burn your laptop. I've been mining for months on normal laptops and they seem fine
|
|
|
|
|