BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

[haladez]

So let me get this straight? BBP is now favoring big mining ops over everyone else?

Before that it was an arbitrary limitation that could be bypassed by running multiple instances.

So honest people with strong CPUs would get significantly less than people who were using the bypass.
I gotta admit that I simply couldn't be bothered to set up multiple clients.

Now it just takes your raw CPU power again.

[tiras]

So is 1.0.6.9 working?

it's working

[jaapgvk]

So let me get this straight? BBP is now favoring big mining ops over everyone else?

Before that it was an arbitrary limitation that could be bypassed by running multiple instances.

So honest people with strong CPUs would get significantly less than people who were using the bypass.
I gotta admit that I simply couldn't be bothered to set up multiple clients.

Now it just takes your raw CPU power again.

When it works. I haven't been able to mine since Thursday. That's my biggest issue right now. Seems everyone is getting to mine, albeit in small chunks, while I can't get biblepay-master to mine anything. Can't even get my wallet to synch properly. Left my box compiling 1.0.6.9 and it will be that way until I get home. And then, it may or may not work and I'll have to d/l n compile ANOTHER mandantory update that may or may not work. Then, have to d/l another, etc. etc . If all I'm doing is d/ling updates and never getting to actually mine anything  while others are is quite frustrating. But I understand ur interest is with the big mining rigs becuz thats where profit is.

The interest isn't with the big mining rigs. I've been mining with a couple of 6+ year old shitty PC's for months and have nothing to complain about. I also think that people have been trying to help you all they can. Yes, it's frustrating when something doesn't work, but are you sure you did the following:

- Delete blocks and chainstate folders, delete banlist, fee_estimates, governance, mncache, netfulfiled and peers

And then did a reindex?

1.0.6.9 is working fine for me btw

[tiras]

So let me get this straight? BBP is now favoring big mining ops over everyone else?

Before that it was an arbitrary limitation that could be bypassed by running multiple instances.

So honest people with strong CPUs would get significantly less than people who were using the bypass.
I gotta admit that I simply couldn't be bothered to set up multiple clients.

Now it just takes your raw CPU power again.

When it works. I haven't been able to mine since Thursday. That's my biggest issue right now. Seems everyone is getting to mine, albeit in small chunks, while I can't get biblepay-master to mine anything. Can't even get my wallet to synch properly. Left my box compiling 1.0.6.9 and it will be that way until I get home. And then, it may or may not work and I'll have to d/l n compile ANOTHER mandantory update that may or may not work. Then, have to d/l another, etc. etc . If all I'm doing is d/ling updates and never getting to actually mine anything  while others are is quite frustrating. But I understand ur interest is with the big mining rigs becuz thats where profit is.

pm me if you need help with linux install

[cInfiniteBtcLetsShare]

Thats great!  I have a little more insight.  The Diff went up because Dark Gravity wave bases it on the last period, so it could take a few more blocks before the diff drops drastically.  I think its going to drop drastically because only half have upgraded. 

Additionally the non 1065 users only have a banscore of 5 per bad submitted block, so it will take a while for them to drop off your nodes.  They are now mining on a fork.

After diff drops below 5000 or so, more BBP should roll in for the earlybirds.

[tiras]

Nerf herder, you should start providing screenshots of some sort, it seems to be only you having problems.

Not everyone, especially not the lead dev, can be there to baby spoon feed you how to fix your client.

seems like he's having fun trolling here.   his pm wasn't about anything specific either

[jaapgvk]

So let me get this straight? BBP is now favoring big mining ops over everyone else?

Before that it was an arbitrary limitation that could be bypassed by running multiple instances.

So honest people with strong CPUs would get significantly less than people who were using the bypass.
I gotta admit that I simply couldn't be bothered to set up multiple clients.

Now it just takes your raw CPU power again.

When it works. I haven't been able to mine since Thursday. That's my biggest issue right now. Seems everyone is getting to mine, albeit in small chunks, while I can't get biblepay-master to mine anything. Can't even get my wallet to synch properly. Left my box compiling 1.0.6.9 and it will be that way until I get home. And then, it may or may not work and I'll have to d/l n compile ANOTHER mandantory update that may or may not work. Then, have to d/l another, etc. etc . If all I'm doing is d/ling updates and never getting to actually mine anything  while others are is quite frustrating. But I understand ur interest is with the big mining rigs becuz thats where profit is.

The interest isn't with the big mining rigs. I've been mining with a couple of 6+ year old shitty PC's for months and have nothing to complain about. I also think that people have been trying to help you all they can. Yes, it's frustrating when something doesn't work, but are you sure you did the following:

- Delete blocks and chainstate folders, delete banlist, fee_estimates, governance, mncache, netfulfiled and peers

And then did a reindex?

1.0.6.9 is working fine for me btw

For the Love of God, I have repeated this process like 5 times already today. So y do uy insist on continually telling me to do this? Yes, I deleted everything
Yes, I reindexed
yes, to whatever ur next stupid suggestion is. I have already done it. Can we try something different?

Wont b able to see 1.0.6.9 works or not until much later today, possibly could be next week b4 I have access to the machine again.
Don't even know if the code finished compiling at this point. I just know it was compiling b4 I left.

And what if this doesn't work? What then, after that I am just going to assume that you all are just keeping me from participating on purpose. Seems so odd that everyone else is getting to mine, but not me.

And if u think that that is Christian in any way shape or form, u guys really don't understand Jesus or what He was saying.

You could try reinstalling your OS to start completely afresh. No one else seems to be having your issue of hanging blocks anymore, so i don't think there is something wrong with the clean wallet itself in this department.

[tiras]

Nerf herder, you should start providing screenshots of some sort, it seems to be only you having problems.

Not everyone, especially not the lead dev, can be there to baby spoon feed you how to fix your client.

JC ,   can you help with this question ?

>> is there a way to track all the history of MN winners from the very beginning using CLI or anything else ?

>> "masternode winners"  outputs just a sliding 30 blocks window.

[cryptomaster13]

BBP will reach 10$ soon. as per christamas and other new projects charity

[616westwarmoth]

Nerf, Tiras is our Linux install guru, I'm pretty savvy at it to, PM the both of us if you need to.

Since you're having such major issues that no one else is reporting, I would do one of two things.  If this is a dedicated BBP mining box, the reinstall Ubuntu 16.04 LTS, then run the BBP install guide again from start to finish.  My guess is there is some sort of system conflict you're experiencing and a fresh install should do the trick.  If it's not a dedicate BBP mining box, then sudo apt-get remove some of the components listed in the guide, then start from the beginning of the Linux install guide.  My second guess would be an issue with where the Berkeley DB wound up.

Make sure you

Code:

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade

After you get to the step that reads something like this:

Code:

cd $BP_ROOT
sudo chmod 777 share/genbuild.sh
sudo chmod 777 autogen.sh

Change the next steps to the following (omit the --without-gui if you plan to run BBP in other than just the -daemon mode

Code:

./autogen.sh
./configure LDFLAGS="-L${path_to_berkeley_db}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/ -march=native" --without-gui

Follow the rest of the guide.  Note any errors.  Let me or Tiras know, screenshots would be handy for me, can't speak for others.

[tiras]

Nerf herder, you should start providing screenshots of some sort, it seems to be only you having problems.

Not everyone, especially not the lead dev, can be there to baby spoon feed you how to fix your client.

JC ,   can you help with this question ?

>> is there a way to track all the history of MN winners from the very beginning using CLI or anything else ?

>> "masternode winners"  outputs just a sliding 30 blocks window.

Unfortunately no, I dont have the knowledge to assist there. Ive just experimented with other masternode coins in the past as an investor.

hope Rob can clarify this

[zthomasz]

BiblePay - 1.0.6.9
Mandatory Upgrade


- Enable superblocks and masternode payments at block #21710

** Note: This is the linux upgrade.  Windows will be ready in 3 hours **

What happens to pool miners that don't upgrade by block #21710 .. do they get ignored or rejected by the pool?

[PewPewGoesTheDuck]

Can a version number be placed on the windows executable or maybe just under the button to download it? That way we know when an upgrade will be needed without having to install it to see if a version changes.

[togoshigekata]

https://github.com/biblepay/biblepay/blob/fd8db16748a8ae1e38d7bda5692353be00a14918/src/rpcmasternode.cpp#L404

https://github.com/biblepay/biblepay/blob/505af64c34656f4fccb170426abec22eb047eb62/src/governance-classes.cpp#L733

It looks like the winners command is set to only loop through at least 20 payments,
I know nHeight and nLast are representing block numbers, but not sure which ones

Im not sure how much stress looking up superblock payments causes, I assume 20 was set for a reason without a variable you could input, but who knows

===

**EDIT**: you can add variable to end of masternode winners command

EX: masternode winners 100

===

Rob mentioned that there has to be consensus of 10 or greater, I assume thats what the number at the end of the output is,

EX:  "21600": "ADDRESS:3"

I dont think anyone has actually made any sanctuary rewards, there are only a few 10s and I think Rob said he was testing/checking if it takes 11

Im curious to learn more how this all ends up working!

[ignition-network]

Interesting but a little deprecated now though =o

[jaapgvk]

Can a version number be placed on the windows executable or maybe just under the button to download it? That way we know when an upgrade will be needed without having to install it to see if a version changes.

I agree that having a version number would be handy, but you don't have to install to see if the version has changed. You can just right-click the downloaded exe and select properties -> details. You can find a version number there

[sharpshot]

Can a version number be placed on the windows executable or maybe just under the button to download it? That way we know when an upgrade will be needed without having to install it to see if a version changes.

I agree that having a version number would be handy, but you don't have to install to see if the version has changed. You can just right-click the downloaded exe and select properties -> details. You can find a version number there

Problem is that I have to keep downloading it to find out if it's the new version.  I must of downloaded the old version 20 times in the past few days.

[seasonw]

Windows version ready?

[tiras]

Nerf, Tiras is our Linux install guru, I'm pretty savvy at it to, PM the both of us if you need to.

Since you're having such major issues that no one else is reporting, I would do one of two things.  If this is a dedicated BBP mining box, the reinstall Ubuntu 16.04 LTS, then run the BBP install guide again from start to finish.  My guess is there is some sort of system conflict you're experiencing and a fresh install should do the trick.  If it's not a dedicate BBP mining box, then sudo apt-get remove some of the components listed in the guide, then start from the beginning of the Linux install guide.  My second guess would be an issue with where the Berkeley DB wound up.

Make sure you

Code:

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade

After you get to the step that reads something like this:

Code:

cd $BP_ROOT
sudo chmod 777 share/genbuild.sh
sudo chmod 777 autogen.sh

Change the next steps to the following (omit the --without-gui if you plan to run BBP in other than just the -daemon mode

Code:

./autogen.sh
./configure LDFLAGS="-L${path_to_berkeley_db}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/ -march=native" --without-gui

Follow the rest of the guide.  Note any errors.  Let me or Tiras know, screenshots would be handy for me, can't speak for others.

I cant pm anyone due to daily limit.

join the discord channel to get a  realtime help

https://discord.gg/Cx7Mym

[hkalvin]

Ok. Just got back to the machine unexpectedly early.

1.0.6.9 compiled.

Deleted all .dat filers etc from .biblepaycore

Synching atm....

Mining ops have begun successfully.

However, my wallet is not showing the 15571.?? bbp that should be there. Rescanning block chain

Still not showing up.....sigh.....

NM, just go ahead and keep it. Just start from scratch. Again.

Did you deleted the wallet.dat ?? If yes, you're lost the BBP already ,Please find back this file in trash folder and overwrite the existing (Please do the backup first)if not yet empty.

Should be in
/home/username/.local/share/Trash