TomosMining - HIGHEST PAID MINING (BTC->FaucetHub) 5% REF!

[drjeanjean]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?


-----------------------------

INFO:
I will make short server restart (within 5 minutes) and adjust a little payouts (down) , because of higher difficulty of ETN + XMR blocks (less payout from mining pages)
[/quote]

[tomos81]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

[drjeanjean]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

[tomos81]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

[drjeanjean]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

[tomos81]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

run .bat file, not exe

[drjeanjean]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

run .bat file, not exe

it quit instantly

[tomos81]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

run .bat file, not exe

it quit instantly

it means some parameter is not OK in the .bat file
my .bat looks like this (you must put your BTC address)

Code:

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1  -p x -dbg -2 -u 1DnWG7sL7yWekSS11nZsNNnxyWrwtHNYRs -t 3

-t 3 means that i am using only 3 clores from my 4 core laptop, because i am watching movies and working on it.. without overheating

[drjeanjean]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

run .bat file, not exe

it quit instantly

it means some parameter is not OK in the .bat file
my .bat looks like this (you must put your BTC address)

Code:

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1  -p x -dbg -2 -u 1DnWG7sL7yWekSS11nZsNNnxyWrwtHNYRs -t 3

-t 3 means that i am using only 3 clores from my 4 core laptop, because i am watching movies and working on it.. without overheating

mine is :

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1 -p x -dbg -2 -u 1K2X8Q6sXYsW9HqT7noqGXuyzu8qfLUzRj -t 4

can't open with admin right but double clik on it and it launch... but i'm in slow mode, no memory allocate...

[tomos81]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

run .bat file, not exe

it quit instantly

it means some parameter is not OK in the .bat file
my .bat looks like this (you must put your BTC address)

Code:

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1  -p x -dbg -2 -u 1DnWG7sL7yWekSS11nZsNNnxyWrwtHNYRs -t 3

-t 3 means that i am using only 3 clores from my 4 core laptop, because i am watching movies and working on it.. without overheating

mine is :

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1 -p x -dbg -2 -u 1K2X8Q6sXYsW9HqT7noqGXuyzu8qfLUzRj -t 4

can't open with admin right but double clik on it and it launch... but i'm in slow mode, no memory allocate...

if you have at least 4 GB (6+ recommended) , restart computer and as first thing run the .bat file
it will switch to fast mode. also you can create swap file at least 12 GB + restart , it will improve the speed too

[drjeanjean]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

run .bat file, not exe

it quit instantly

it means some parameter is not OK in the .bat file
my .bat looks like this (you must put your BTC address)

Code:

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1  -p x -dbg -2 -u 1DnWG7sL7yWekSS11nZsNNnxyWrwtHNYRs -t 3

-t 3 means that i am using only 3 clores from my 4 core laptop, because i am watching movies and working on it.. without overheating

mine is :

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1 -p x -dbg -2 -u 1K2X8Q6sXYsW9HqT7noqGXuyzu8qfLUzRj -t 4

can't open with admin right but double clik on it and it launch... but i'm in slow mode, no memory allocate...

if you have at least 4 GB (6+ recommended) , restart computer and as first thing run the .bat file
it will switch to fast mode. also you can create swap file at least 12 GB + restart , it will improve the speed too

i restart and fast mode now thanks, i put -t 7 cause i have 8 cores, i can't put 12 ? yes ?

[tomos81]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

run .bat file, not exe

it quit instantly

it means some parameter is not OK in the .bat file
my .bat looks like this (you must put your BTC address)

Code:

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1  -p x -dbg -2 -u 1DnWG7sL7yWekSS11nZsNNnxyWrwtHNYRs -t 3

-t 3 means that i am using only 3 clores from my 4 core laptop, because i am watching movies and working on it.. without overheating

mine is :

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1 -p x -dbg -2 -u 1K2X8Q6sXYsW9HqT7noqGXuyzu8qfLUzRj -t 4

can't open with admin right but double clik on it and it launch... but i'm in slow mode, no memory allocate...

if you have at least 4 GB (6+ recommended) , restart computer and as first thing run the .bat file
it will switch to fast mode. also you can create swap file at least 12 GB + restart , it will improve the speed too

i restart and fast mode now thanks, i put -t 7 cause i have 8 cores, i can't put 12 ? yes ?

12 threads will be slower than 7, your cores will be overloaded and not ok balanced computing power..  put maximum 8
with i7 it will be nice speed

[drjeanjean]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

run .bat file, not exe

it quit instantly

it means some parameter is not OK in the .bat file
my .bat looks like this (you must put your BTC address)

Code:

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1  -p x -dbg -2 -u 1DnWG7sL7yWekSS11nZsNNnxyWrwtHNYRs -t 3

-t 3 means that i am using only 3 clores from my 4 core laptop, because i am watching movies and working on it.. without overheating

mine is :

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1 -p x -dbg -2 -u 1K2X8Q6sXYsW9HqT7noqGXuyzu8qfLUzRj -t 4

can't open with admin right but double clik on it and it launch... but i'm in slow mode, no memory allocate...

if you have at least 4 GB (6+ recommended) , restart computer and as first thing run the .bat file
it will switch to fast mode. also you can create swap file at least 12 GB + restart , it will improve the speed too

i restart and fast mode now thanks, i put -t 7 cause i have 8 cores, i can't put 12 ? yes ?

12 threads will be slower than 7, your cores will be overloaded and not ok balanced computing power..  put maximum 8
with i7 it will be nice speed

many thanks for you re help, i got around 140h/s with 7 cors, it's a i3

[tomos81]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

run .bat file, not exe

it quit instantly

it means some parameter is not OK in the .bat file
my .bat looks like this (you must put your BTC address)

Code:

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1  -p x -dbg -2 -u 1DnWG7sL7yWekSS11nZsNNnxyWrwtHNYRs -t 3

-t 3 means that i am using only 3 clores from my 4 core laptop, because i am watching movies and working on it.. without overheating

mine is :

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1 -p x -dbg -2 -u 1K2X8Q6sXYsW9HqT7noqGXuyzu8qfLUzRj -t 4

can't open with admin right but double clik on it and it launch... but i'm in slow mode, no memory allocate...

if you have at least 4 GB (6+ recommended) , restart computer and as first thing run the .bat file
it will switch to fast mode. also you can create swap file at least 12 GB + restart , it will improve the speed too

i restart and fast mode now thanks, i put -t 7 cause i have 8 cores, i can't put 12 ? yes ?

12 threads will be slower than 7, your cores will be overloaded and not ok balanced computing power..  put maximum 8
with i7 it will be nice speed

many thanks for you re help, i got around 140h/s with 7 cors, it's a i3

yw, it's a nice speed
i hope i will find best combo to increase payouts again

[drjeanjean]

try open cmd as admininstrator and write:

Code:

sfc /scannow 

  , wait few minutes until not finishes..


done and it said, it don't found violation of integrity...

what it means?

it made system check if notmissing some dll or some stuff
if mining not working, you can download all package of claymore miner from here:
https://mega.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg

unzip and place my .bat file in this directory..

Thansk it launch in the pool xmr-eu.dwarfool.com:8005 , is that good ?

nope... you need to use the .bat file and rename-remove the config file from that zip, because it has higher priority

ok i delete the config file and had already put your .bat and delete the one of the zip. now it says no pool

run .bat file, not exe

it quit instantly

it means some parameter is not OK in the .bat file
my .bat looks like this (you must put your BTC address)

Code:

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1  -p x -dbg -2 -u 1DnWG7sL7yWekSS11nZsNNnxyWrwtHNYRs -t 3

-t 3 means that i am using only 3 clores from my 4 core laptop, because i am watching movies and working on it.. without overheating

mine is :

NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1 -p x -dbg -2 -u 1K2X8Q6sXYsW9HqT7noqGXuyzu8qfLUzRj -t 4

can't open with admin right but double clik on it and it launch... but i'm in slow mode, no memory allocate...

if you have at least 4 GB (6+ recommended) , restart computer and as first thing run the .bat file
it will switch to fast mode. also you can create swap file at least 12 GB + restart , it will improve the speed too

i restart and fast mode now thanks, i put -t 7 cause i have 8 cores, i can't put 12 ? yes ?

12 threads will be slower than 7, your cores will be overloaded and not ok balanced computing power..  put maximum 8
with i7 it will be nice speed

many thanks for you re help, i got around 140h/s with 7 cors, it's a i3

yw, it's a nice speed
i hope i will find best combo to increase payouts again

nice, thanks tomos

[hroub]

Hi!

@Tomos, Any news with cloud mining option?

[tomos81]

Hi!

@Tomos, Any news with cloud mining option?

hi , i will work on that all sunday, it's not so easy as it looks like

[hroub]

Hi!

@Tomos, Any news with cloud mining option?

hi , i will work on that all sunday, it's not so easy as it looks like

I believe you! Can you please PM me when it's ready, in case I miss it on this thread? Thanks.

[tomos81]

Our speed is 3.25KH/s  , that's a nice speed
also i increased revenue by 5.5% because price of ETN is higher

i will always pay out 99% what we earn (rest is fee for server + tx fees)

[Ranger9202]

Our speed is 3.25KH/s  , that's a nice speed
also i increased revenue by 5.5% because price of ETN is higher

i will always pay out 99% what we earn (rest is fee for server + tx fees)

Is it just me or earnings went down by 3 times?
day 1 was around 3.3k satoshi with 160h/s
day 2 was around 8k satosi with 290h/s
day 3, 1k satoshi for 9h of running with 290h/s?