[ANN] [ARO] | Arionum | CPU+GPU+Masternode | PHP Based |Decentralized Revolution

[Squintz]

Hey guys if I could get a little help it would be much appreciated.

I have a Ryzen 1700x and I can't get more than 5-6 h/s out of it. My memory is 4gb could that be my issue?

Hey, I was told its a memory intensive coin to mine. I had 8g and got another 8g of ram to see if I could get my ryzen 1800x to do better. Im getting around 7H/s I didnt get any boost from the additional 8 gigs of ram.
Ive got a i7 6700k during 13-14H/s so im pretty sure this ryzen will do better

You can try some more ram
also the ryzen balanced power profile I tried but nothing changed
You can make sure your ram is reading the right mhz in your bios

Looking for some help as well with my ryzen.  Good luck let us know

Check to make sure your memory is in dual channel configuration on the physical motherboard. Also, give version 0.2.3 a try, latest (0.2.4.1) improved affinity for some cpus and did not improve it for others... still figuring out best config, hard to do as I don't have any ryzens to try on...

Dan you are the man thank you for the miner and your efforts..

I tried 2.3 and did not have any luck.

I have my config at 4 (tried all numbers 4&6 work best), standard hasher mode

PC Wise it's windows 10 with high performance setting power and a huge pagefile.

I can't copy paste but the screen shows

Streams 4,
 runs (1-10 varying)
h/run 6
curr h/s 5.6*
Currently tic 92-95.**
Argon % 99.986
Sha % .003

Ran it all last night made 3 ARO

[xs.over]

As you know, in Discord -- it's been the same shit, different drawls with him. I'm glad I wasn't the only one that put two and two together

What are you talking about, with whom? I don't familiar with you and fyi don't have discord.

[programmerdan]

Streams 4,
 runs (1-10 varying)
h/run 6
curr h/s 5.6*
Currently tic 92-95.**
Argon % 99.986
Sha % .003

Hmm, so, channels of memory is basically, check your physical placement of memory modules on the motherboard -- they should be in the pattern that the motherboard tells you to, to achieve dual channel.

From the stats you posted, Runs is kind of low / strange / concerning, but fundamentally those stats seem to indicate you are "fully loaded"... so we'd need to look elsewhere to figure out.

Hop into Discord to chat with me, if you like.

[2toestommy]

Hey guys if I could get a little help it would be much appreciated.

I have a Ryzen 1700x and I can't get more than 5-6 h/s out of it. My memory is 4gb could that be my issue?

Hey, I was told its a memory intensive coin to mine. I had 8g and got another 8g of ram to see if I could get my ryzen 1800x to do better. Im getting around 7H/s I didnt get any boost from the additional 8 gigs of ram.
Ive got a i7 6700k during 13-14H/s so im pretty sure this ryzen will do better

You can try some more ram
also the ryzen balanced power profile I tried but nothing changed
You can make sure your ram is reading the right mhz in your bios

Looking for some help as well with my ryzen.  Good luck let us know

Check to make sure your memory is in dual channel configuration on the physical motherboard. Also, give version 0.2.3 a try, latest (0.2.4.1) improved affinity for some cpus and did not improve it for others... still figuring out best config, hard to do as I don't have any ryzens to try on...

I put the ram into dual channel and bam jumped from 7 to 14-15H/s. That solved it. Thanks Dan
So the 8 gig alone wasnt enough, bringing the ram up to 16 and putting it into dual channel was the trick. Ryzen 7 1800x  no working like a champ

[2toestommy]

Hey guys if I could get a little help it would be much appreciated.

I have a Ryzen 1700x and I can't get more than 5-6 h/s out of it. My memory is 4gb could that be my issue?

ok so I am pretty sure your issue is the amount of ram you have. see if you can get 16 gigs and put it into dual channel mode on the motherboard. This is what worked for me , all credit to dan

[programmerdan]

I put the ram into dual channel and bam jumped from 7 to 14-15H/s. That solved it. Thanks Dan
So the 8 gig alone wasnt enough, bringing the ram up to 16 and putting it into dual channel was the trick. Ryzen 7 1800x  no working like a champ

Awesome, glad to hear that solved it!

[Titus pollo]

Hey guys i know it's not the place really but i need some help. So i've been mining aro for around two weeks but i didnt save my wallet private key so far. Unfortunatly my windows is having trouble booting, i have ubuntu on dual boot so i was wondering of there is anyway i can find/save my wallet (which is on win10) from ubuntu.

Cheers

[AroDev]

Hey guys i know it's not the place really but i need some help. So i've been mining aro for around two weeks but i didnt save my wallet private key so far. Unfortunatly my windows is having trouble booting, i have ubuntu on dual boot so i was wondering of there is anyway i can find/save my wallet (which is on win10) from ubuntu.

Cheers

If you're able to mount the windows partition, try to find C:\Users\YOUR-USER\AppData\Roaming\Arionum
The wallet.aro should be there.

[srow2017]

Hey guys i know it's not the place really but i need some help. So i've been mining aro for around two weeks but i didnt save my wallet private key so far. Unfortunatly my windows is having trouble booting, i have ubuntu on dual boot so i was wondering of there is anyway i can find/save my wallet (which is on win10) from ubuntu.

Cheers

If you're able to mount the windows partition, try to find C:\Users\YOUR-USER\AppData\Roaming\Arionum
The wallet.aro should be there.

type %appata% then find Arionum folder

[stil3tto]

I mined all day but nothing pay on my wallet... What is the wrong?

[munchyBonbon]

This is what I'm getting with ProgrammerDan's Java Aro miner, Ryzen 1700x, 16gb of ram:

http://prntscr.com/iiel5n

Using 15 streams because 16 gives me a lower hash rate.

[Silkystarr]

This is what I'm getting with ProgrammerDan's Java Aro miner, Ryzen 1700x, 16gb of ram:

http://prntscr.com/iiel5n

Using 15 streams because 16 gives me a lower hash rate.

I mine on corei5 4GB RAM can you post guideline how i mine on Java Miner Because I got nothing yet since last 4 days

[marques99]

Mining performance for AMD RYZEN Threadripper 1950X with 4 sticks of DD4 3600 memory (4GB each).

Streams  Runs H/run Cur H/s Cur TiC%  Cur WL%  Argon %    Sha %  Shares Finds Reject
      16    35     9   28.16    90.17    0.000   99.991    0.002       0     0      0
      16    35     9   28.16    90.17    0.000   99.991    0.002       0     0      0
      16    33     9   28.02    90.33    0.000   99.991    0.002       0     0      0
      16    33     9   28.22    90.52    0.000   99.991    0.002       0     0      0
      16    34     9   28.23    90.97    0.000   99.991    0.002       0     0      0
      16    30     9   28.52    90.58    0.000   99.991    0.002       0     0      0
      16    34     9   28.15    90.14    0.000   99.991    0.002       0     0      0

Update: my CPU is only running at 60% and I realize my ram is only dual channel.  I will upgrade to quad channel ram and post an update.

[2toestommy]

Mining performance for AMD RYZEN Threadripper 1950X with 4 sticks of DD4 3600 memory (4GB each).

Streams  Runs H/run Cur H/s Cur TiC%  Cur WL%  Argon %    Sha %  Shares Finds Reject
      16    35     9   28.16    90.17    0.000   99.991    0.002       0     0      0
      16    35     9   28.16    90.17    0.000   99.991    0.002       0     0      0
      16    33     9   28.02    90.33    0.000   99.991    0.002       0     0      0
      16    33     9   28.22    90.52    0.000   99.991    0.002       0     0      0
      16    34     9   28.23    90.97    0.000   99.991    0.002       0     0      0
      16    30     9   28.52    90.58    0.000   99.991    0.002       0     0      0
      16    34     9   28.15    90.14    0.000   99.991    0.002       0     0      0

Update: my CPU is only running at 60% and I realize my ram is only dual channel.  I will upgrade to quad channel ram and post an update.

Thats really nice hash man gg

[Squintz]

Mining performance for AMD RYZEN Threadripper 1950X with 4 sticks of DD4 3600 memory (4GB each).

Streams  Runs H/run Cur H/s Cur TiC%  Cur WL%  Argon %    Sha %  Shares Finds Reject
      16    35     9   28.16    90.17    0.000   99.991    0.002       0     0      0
      16    35     9   28.16    90.17    0.000   99.991    0.002       0     0      0
      16    33     9   28.02    90.33    0.000   99.991    0.002       0     0      0
      16    33     9   28.22    90.52    0.000   99.991    0.002       0     0      0
      16    34     9   28.23    90.97    0.000   99.991    0.002       0     0      0
      16    30     9   28.52    90.58    0.000   99.991    0.002       0     0      0
      16    34     9   28.15    90.14    0.000   99.991    0.002       0     0      0

Update: my CPU is only running at 60% and I realize my ram is only dual channel.  I will upgrade to quad channel ram and post an update.

Thats really nice hash man gg

dammmmm dude nice setup.

I ordered 2666 16gb vengeance ram last night. Going to pop in tomorrow and will update. Thanks everyone for posting

[Squintz]

I put the ram into dual channel and bam jumped from 7 to 14-15H/s. That solved it. Thanks Dan
So the 8 gig alone wasnt enough, bringing the ram up to 16 and putting it into dual channel was the trick. Ryzen 7 1800x  no working like a champ

Awesome, glad to hear that solved it!

Pretty sure my problem is ram as well. The GPU miner in me bought the go-to 2400 4gb stick bc I was thinking most work was done in the cache

[The_Hu]

Will the future of the Arionum project be a stabilizer of the value of the currency in the market?

[fonship]

Mining performance for AMD RYZEN Threadripper 1950X with 4 sticks of DD4 3600 memory (4GB each).

Streams  Runs H/run Cur H/s Cur TiC%  Cur WL%  Argon %    Sha %  Shares Finds Reject
      16    35     9   28.16    90.17    0.000   99.991    0.002       0     0      0
      16    35     9   28.16    90.17    0.000   99.991    0.002       0     0      0
      16    33     9   28.02    90.33    0.000   99.991    0.002       0     0      0
      16    33     9   28.22    90.52    0.000   99.991    0.002       0     0      0
      16    34     9   28.23    90.97    0.000   99.991    0.002       0     0      0
      16    30     9   28.52    90.58    0.000   99.991    0.002       0     0      0
      16    34     9   28.15    90.14    0.000   99.991    0.002       0     0      0

Update: my CPU is only running at 60% and I realize my ram is only dual channel.  I will upgrade to quad channel ram and post an update.

Waiting for your update, how quad channel works? if i understand correctly, dual channel can be done my putting two sticks in same color coded slots.
How you will do quad channel, same or some other way.
Do update how speed change after that.

[Titus pollo]

If you're able to mount the windows partition, try to find C:\Users\YOUR-USER\AppData\Roaming\Arionum
The wallet.aro should be there.

Sorted thanks guys

[marques99]

Mining performance for AMD RYZEN Threadripper 1950X with 4 sticks of DD4 3600 memory (4GB each).

Streams  Runs H/run Cur H/s Cur TiC%  Cur WL%  Argon %    Sha %  Shares Finds Reject
      16    35     9   28.16    90.17    0.000   99.991    0.002       0     0      0
      16    35     9   28.16    90.17    0.000   99.991    0.002       0     0      0
      16    33     9   28.02    90.33    0.000   99.991    0.002       0     0      0
      16    33     9   28.22    90.52    0.000   99.991    0.002       0     0      0
      16    34     9   28.23    90.97    0.000   99.991    0.002       0     0      0
      16    30     9   28.52    90.58    0.000   99.991    0.002       0     0      0
      16    34     9   28.15    90.14    0.000   99.991    0.002       0     0      0

Update: my CPU is only running at 60% and I realize my ram is only dual channel.  I will upgrade to quad channel ram and post an update.

Waiting for your update, how quad channel works? if i understand correctly, dual channel can be done my putting two sticks in same color coded slots.
How you will do quad channel, same or some other way.
Do update how speed change after that.

My MB supports quad channel memory, I just screw up and order the dual channel by mistake like a noob.