siagirl
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2018, 02:27:14 PM |
|
How to configurate bat. File for mineks O.S. windows 64x amd rx 580 8gb. pls ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
dejan_p
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 132
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2018, 08:15:19 PM |
|
--set-work-batch 8 (or any other value) didn't work for me as a solution for loosing half of the hashrate
however, as a temporary workaround, i inter-connected teamviewer from my other rigs that run 24/7 to keep it running at max hashrate
|
|
|
|
goedi
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2018, 09:55:03 PM |
|
I use GTX1060 (3gb) x 6 in Linux. lolminer sometimes stops working on one or two GPUs (Shows 0 sol \ s) while the GPU is loaded to 100% What is the reason?
Unknown yet. Will introduce feature to shut down miner in such situations so simple script can get it back working. I have the same problem with 2xVega 64 and 4xVega 56 in one rig with windows 10 and amd blockchain driver beta. After a couple of hours sometimes one or two GPU's show 0 sols/s. stopping lolminer and restarting it resolves the issue. However I think the driver also resets on those cards as the memory frequency is back to stock settings, so I have to adjust it again for the cards that showed 0 sols/s. didn't have time to run further tests yet.
|
|
|
|
dudic
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 26, 2018, 12:11:16 PM |
|
Hello folks ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I have problem with lol miner, he dont work on my pool minezone.vip Connecting to stratum server minezone.vip:9999 Connected! Subscribed to stratum server New target recelved: 0000111111111111100000000000000000000000000000000000000 New job recelved: ce0a Warning: No stable connection for 30 seconds, Trying to reconnect. Lolliedieb HELPPPP
|
|
|
|
Vladlenius
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 26, 2018, 01:17:31 PM |
|
It works better then 0.20. On 290x I have 7400sol/s and on 270 I have 4300sol/s thanks to change in work size. On 0.20 it was 6600/3700sol/s for 290x/270. still this is low compared to optiminer where 280x can do 7300sols. Please work a little bit more on AMD cards. Thank a lot!!!!! This is for me only option because I have some issue with linux (ubuntu and amdgpu-pro)
|
|
|
|
Lolliedieb (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 26, 2018, 01:46:24 PM |
|
Connecting to stratum server minezone.vip:9999 Connected! Subscribed to stratum server New target recelved: 0000111111111111100000000000000000000000000000000000000 New job recelved: ce0a Warning: No stable connection for 30 seconds, Trying to reconnect. Lolliedieb HELPPPP
Hmm ... I am missing the authorization message - you are certain that your pool replied to the worker authorization request?
|
Check out lolMiner 1.56, an efficient miner for Ethash, Beam and many Cuckoo-Cycle and Equihash variants for AMD & Nvidia cards at low fees.
|
|
|
Grof666
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 26, 2018, 02:59:30 PM |
|
Hello, I'm mining on the pool minezone.vip:8080 and everything works ok. But when I try to connect the lolminer I have this problem: https://ibb.co/dRVsyHI see a connected worker on the pool and stops working. https://ibb.co/geGFJHLolliedieb can you help me solve this problem?
|
|
|
|
elektrofusion7
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 26, 2018, 03:52:02 PM |
|
It works better then 0.20. On 290x I have 7400sol/s and on 270 I have 4300sol/s thanks to change in work size. On 0.20 it was 6600/3700sol/s for 290x/270. still this is low compared to optiminer where 280x can do 7300sols. Please work a little bit more on AMD cards. Thank a lot!!!!! This is for me only option because I have some issue with linux (ubuntu and amdgpu-pro)
This was my post!!! Why you copy-paste it?
|
|
|
|
Lolliedieb (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 26, 2018, 04:00:49 PM |
|
Hello, I'm mining on the pool minezone.vip:8080 and everything works ok. But when I try to connect the lolminer I have this problem: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fibb.co%2FdRVsyH&t=665&c=LVF20IR9isenTw) I see a connected worker on the pool and stops working. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fibb.co%2FgeGFJH&t=665&c=8ctZyUkdJvrjBg) Lolliedieb can you help me solve this problem? Did you read my msg directly above your post? Thats issue with pool setting not sending authentification responce and thus not fitting stratum protocol.
|
Check out lolMiner 1.56, an efficient miner for Ethash, Beam and many Cuckoo-Cycle and Equihash variants for AMD & Nvidia cards at low fees.
|
|
|
|
asazel
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 27, 2018, 12:29:17 PM |
|
I'm getting error No argument given - switching to benchmode right after I try to run it, even though I've edited the config. I take it it can't read it for somereason?
|
|
|
|
Inves
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 168
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 27, 2018, 07:12:01 PM |
|
why so much RAM to the miner? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fd.radikal.ru%2Fd32%2F1802%2F90%2F830de5126f40.jpg&t=665&c=d4DGfG2UFtaWHQ)
|
|
|
|
philippians1111
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 27, 2018, 09:29:43 PM |
|
I was wondering if the Pool stats in Suprnova is accurate? I've got 6 1080 TI's getting like a 100 MH/s and I got only .5 minex for 10 hours of mining..
|
|
|
|
mRpqlz
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2018, 04:20:33 AM |
|
Hi! Faced such a problem When I connect to the rig through the teem viewer, everything works fine, but when disabling TV, hashrate falls in half on all cards. How can I fix it?
Win 10 6x1050ti and 1x1066, miner v 0.22
|
|
|
|
pegonas
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2018, 07:09:59 AM |
|
Hello, what is the hashrate for AMD RX 580 card/s? Thank you ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
|
|
|
|
mk111
Jr. Member
Offline
Activity: 230
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2018, 05:51:25 PM |
|
Come on Lolliedieb, hurry up we are waiting on a new version ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
AndreasSantonio
Newbie
Offline
Activity: 34
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2018, 06:08:08 PM |
|
Hello, what is the hashrate for AMD RX 580 card/s? Thank you ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) ~10kH/s
|
|
|
|
skomi84
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2018, 08:16:36 AM |
|
Conf 2x1060 3gb , run two instances with one with device 0 , and one with device 1 --set-work-batch 3 --use-alt-mine-thread --server mnx.suprnova.cc Very high cpu usage 90-100% (Old CPu c2d) , unstable hashrate 4000-8000sol/s not managed to run continusly.
Conf 2x1060 3gb --set-work-batch 3 --server mnx.suprnova.cc Very high cpu usage 90-100% (Old CPu c2d), hash rate 20000 sol/s bun not managed to run continusly.
Conf 2x1050 (not TI) --set-work-batch 3 --server mnx.suprnova.cc Very high cpu usage 90-100% (Old CPu c2d) , hash rate 3700 - 4100sol/s , stable 24h
conf 4xR9 270( not X) --set-work-batch 8 --set-sleep-duration 750 70% cpu usage (new intel gxxxx on h61) , hash rate 16000sol/s ( 3800 - 4200 per card ) , stable 24h
|
|
|
|
Lolliedieb (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2018, 10:00:20 AM |
|
Conf 2x1060 3gb , run two instances with one with device 0 , and one with device 1 --set-work-batch 3 --use-alt-mine-thread --server mnx.suprnova.cc Very high cpu usage 90-100% (Old CPu c2d) , unstable hashrate 4000-8000sol/s not managed to run continusly.
Conf 2x1060 3gb --set-work-batch 3 --server mnx.suprnova.cc Very high cpu usage 90-100% (Old CPu c2d), hash rate 20000 sol/s bun not managed to run continusly.
Conf 2x1050 (not TI) --set-work-batch 3 --server mnx.suprnova.cc Very high cpu usage 90-100% (Old CPu c2d) , hash rate 3700 - 4100sol/s , stable 24h
conf 4xR9 270( not X) --set-work-batch 8 --set-sleep-duration 750 70% cpu usage (new intel gxxxx on h61) , hash rate 16000sol/s ( 3800 - 4200 per card ) , stable 24h
For your Nvidia I recommend not to change work batch from default and use 2 cards in one instance without alternative mine thread. That should give least CPU load and best performance unless you have the "TeamViewer" bug. Come on Lolliedieb, hurry up we are waiting on a new version ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Haha yea, I am awaiting this two. I am right now working on 0.3 and I can promise performance will bump up ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) But till this is done will take at least one more week, since I also plan to do a more stable pool connector interface and I still have to find some more performance on AMD devices. -------------- For the stats (a long time ago since last time) Current hash rate of all lolMiners: 38,5 Msol Market share: 35,3 %
|
Check out lolMiner 1.56, an efficient miner for Ethash, Beam and many Cuckoo-Cycle and Equihash variants for AMD & Nvidia cards at low fees.
|
|
|
technick
Newbie
Offline
Activity: 22
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2018, 10:35:03 AM |
|
--set-work-batch 8 (or any other value) didn't work for me as a solution for loosing half of the hashrate
however, as a temporary workaround, i inter-connected teamviewer from my other rigs that run 24/7 to keep it running at max hashrate
Just so! If you disable teamwiever hashrate drops by 50%
|
|
|
|
|