darkneorus
Jr. Member
Offline
Activity: 238
Merit: 3
|
|
May 14, 2018, 08:04:28 AM |
|
Hello guys! I'm having the following issues with my rig:
[INFO] 18/05/14 09:11:01 NVIDIA CUDA 9.1 [ERROR] 18/05/14 09:11:01 Unable to query number of CUDA devices! Is an nVidia driver installed?
Its an endless loop. In my case it is caused by power off/on(delay between 2 PSU's; GPU PSU turns on with small delay, so my system cannot see GPU's), to solve this i must simply restart the system. My "monitoring device" will do it automatically IF process or network dies, so in this case i have to do it manually every time (because miner process wont exit with this error).
I need to write an argument that will exit my miner on this error.
will something like "--eexit 1" do the work or should it be something else?
Can you help me with code, so my miner will automatically exit on this error?
Thank you very much in advance!
maybe it will be better to properly synchronize your PSUs startup?
|
|
|
|
1sotope
Newbie
Offline
Activity: 4
Merit: 0
|
|
May 14, 2018, 09:02:53 AM |
|
maybe it will be better to properly synchronize your PSUs startup? i cant get rid of that millisecond delay, simple reboot works fine, i just need to automate it through miner shutdown on error(process tracker will do the rest)
|
|
|
|
slim6y
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 14, 2018, 09:03:19 AM |
|
How do you add difficulty at suprnova?
z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20
Is this correct: z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20 -d 16
?
|
|
|
|
ULF
Newbie
Offline
Activity: 75
Merit: 0
|
|
May 14, 2018, 09:24:30 AM |
|
Is there a full tutorial anywhere for set up Enemy 1.08?
Good tutorial really helps less experienced.
What is best pool?
Hash rates for 1060GTX 6GB OC Version and Top tier 1080ti?
One Mining Blogger sez he gets 22 each easily on his 7 1080ti Zotac Amp Extremes
|
|
|
|
Vokas123
Newbie
Offline
Activity: 73
Merit: 0
|
|
May 14, 2018, 10:16:48 AM |
|
How do you add difficulty at suprnova?
z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20
Is this correct: z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20 -d 16
?
No, this would mean that you are mining only with your 16th GPU (out of 16+). Not sure if you can set difficulty for suprnova in your bat file unless they have different ports for high & low diff. I can't see any info about this on their rvn hompage.
|
|
|
|
slim6y
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 14, 2018, 10:20:24 AM |
|
How do you add difficulty at suprnova?
z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20
Is this correct: z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20 -d 16
?
No, this would mean that you are mining only with your 16th GPU (out of 16+). Not sure if you can set difficulty for suprnova in your bat file unless they have different ports for high & low diff. I can't see any info about this on their rvn hompage. I thought as much Suprnova is the best place for RVN and we can't even make use of the "Search mode" What about: z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name.DIFF_16 -p x -i 20 I've seen that done on some pools with the username set up.
|
|
|
|
slim6y
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 14, 2018, 10:23:29 AM |
|
At the Blocks Factory (completely unrelated mind you) you can do this style:
Setting difficulty : connect to the stratum server with username.workername_diffxxx
I guess it is worth a try.
|
|
|
|
cryptodunno
Member
Offline
Activity: 308
Merit: 10
|
|
May 14, 2018, 11:50:17 AM |
|
did anyone compared x16r profitability with different -d param? usinsome 1063s and thinking to try it out, but not sure where to start
|
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3192
Merit: 1003
|
|
May 14, 2018, 03:37:11 PM |
|
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.
[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK [NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK [DEV ] 18/05/13 09:58:34 Mining some dev fee 1.00501% [DEV ] 18/05/13 12:29:03 Done mining dev fee. [DEV ] 18/05/13 12:29:03 Ratio: 22.0877% [INFO ] 18/05/13 12:29:06 zealot/enemy-1.09a miner [INFO ] 18/05/13 12:29:06 NVIDIA CUDA 9.1 [INFO ] 18/05/13 12:29:06 Dev fee is 1.0% [NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------
It wasn't mining on my pool for 5+ hours. Seems like it just paused from 7:17 until 9:58. Then mined dev fee for 2 and a half hours. I'd post screen grabs but I think I'm too new to post pics.
wow this could be huge, 2.5 hr def fee? Anyone else experience this with 1.09a ?
|
|
|
|
felio
Newbie
Offline
Activity: 9
Merit: 0
|
|
May 14, 2018, 06:01:55 PM |
|
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.
[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK [NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK [DEV ] 18/05/13 09:58:34 Mining some dev fee 1.00501% [DEV ] 18/05/13 12:29:03 Done mining dev fee. [DEV ] 18/05/13 12:29:03 Ratio: 22.0877% [INFO ] 18/05/13 12:29:06 zealot/enemy-1.09a miner [INFO ] 18/05/13 12:29:06 NVIDIA CUDA 9.1 [INFO ] 18/05/13 12:29:06 Dev fee is 1.0% [NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------
It wasn't mining on my pool for 5+ hours. Seems like it just paused from 7:17 until 9:58. Then mined dev fee for 2 and a half hours. I'd post screen grabs but I think I'm too new to post pics.
In the last 24 hours now it has maintained a 1% dev fee. It did crash once in that time, but the dev fee it is reporting is 1%. My pool side hashrate looks right on the mining pool page.
|
|
|
|
jax78
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 14, 2018, 06:10:26 PM |
|
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.
[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK [NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK [DEV ] 18/05/13 09:58:34 Mining some dev fee 1.00501% [DEV ] 18/05/13 12:29:03 Done mining dev fee. [DEV ] 18/05/13 12:29:03 Ratio: 22.0877% [INFO ] 18/05/13 12:29:06 zealot/enemy-1.09a miner [INFO ] 18/05/13 12:29:06 NVIDIA CUDA 9.1 [INFO ] 18/05/13 12:29:06 Dev fee is 1.0% [NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------
It wasn't mining on my pool for 5+ hours. Seems like it just paused from 7:17 until 9:58. Then mined dev fee for 2 and a half hours. I'd post screen grabs but I think I'm too new to post pics.
In the last 24 hours now it has maintained a 1% dev fee. It did crash once in that time, but the dev fee it is reporting is 1%. My pool side hashrate looks right on the mining pool page. Are you solo mining ?
|
|
|
|
felio
Newbie
Offline
Activity: 9
Merit: 0
|
|
May 14, 2018, 09:10:10 PM |
|
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.
[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK [NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK [DEV ] 18/05/13 09:58:34 Mining some dev fee 1.00501% [DEV ] 18/05/13 12:29:03 Done mining dev fee. [DEV ] 18/05/13 12:29:03 Ratio: 22.0877% [INFO ] 18/05/13 12:29:06 zealot/enemy-1.09a miner [INFO ] 18/05/13 12:29:06 NVIDIA CUDA 9.1 [INFO ] 18/05/13 12:29:06 Dev fee is 1.0% [NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------
It wasn't mining on my pool for 5+ hours. Seems like it just paused from 7:17 until 9:58. Then mined dev fee for 2 and a half hours. I'd post screen grabs but I think I'm too new to post pics.
In the last 24 hours now it has maintained a 1% dev fee. It did crash once in that time, but the dev fee it is reporting is 1%. My pool side hashrate looks right on the mining pool page. Are you solo mining ? No I'm mining btx on yiimp.
|
|
|
|
dragonmike
|
|
May 14, 2018, 10:22:09 PM |
|
Anyone mining VIT? What hashrates are you getting? My 1080's are averaging 9.5MH/s at -i 20 with mild core o/c. I've had the miner crash after 15 minutes though so not sure how stable that thing is...
|
|
|
|
@enemy (OP)
Member
Offline
Activity: 81
Merit: 16
|
|
May 15, 2018, 06:15:29 AM Last edit: May 15, 2018, 06:52:46 AM by @enemy |
|
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.
[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK [NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK [DEV ] 18/05/13 09:58:34 Mining some dev fee 1.00501% [DEV ] 18/05/13 12:29:03 Done mining dev fee. [DEV ] 18/05/13 12:29:03 Ratio: 22.0877% [INFO ] 18/05/13 12:29:06 zealot/enemy-1.09a miner [INFO ] 18/05/13 12:29:06 NVIDIA CUDA 9.1 [INFO ] 18/05/13 12:29:06 Dev fee is 1.0% [NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------
It wasn't mining on my pool for 5+ hours. Seems like it just paused from 7:17 until 9:58. Then mined dev fee for 2 and a half hours. I'd post screen grabs but I think I'm too new to post pics.
In the last 24 hours now it has maintained a 1% dev fee. It did crash once in that time, but the dev fee it is reporting is 1%. My pool side hashrate looks right on the mining pool page. Are you solo mining ? No I'm mining btx on yiimp. Please do not overclock your GPU too much ! The program stuck and did not perform work with GPU from 07:17:08 , there are no blocks inside a dev fee too and after no block/accepted shares. We will add software watchdog in future releases, but again - please use recommended settings and OC only after miner work stable and LONG time. About defender... Miner is packed and Microsoft can't unpack the file and thinks, a virus there. Nothing new.
|
RVN: RFQXKVKpHMwyJ86YqQUJSZK1S8m8oRbC5h
|
|
|
eruman34
Newbie
Offline
Activity: 20
Merit: 0
|
|
May 15, 2018, 07:08:13 AM |
|
When 19 GPU support? What is stopping you using -d x,x,x in 2 or 3 BAT files? Miner cannot launch 18th gpu even only -d 17 selected gpu id range not defined thats what stops me. No problem on other miners so not card error CMD screen stays black.
|
|
|
|
Marvell2
|
|
May 15, 2018, 10:28:38 AM |
|
the just released a patched version 1.09b
|
|
|
|
cryptodunno
Member
Offline
Activity: 308
Merit: 10
|
|
May 15, 2018, 11:38:07 AM |
|
the just released a patched version 1.09b
was this official release from enemy? what are the improvements? I`m loving this miner more and more, it`s updated almost on weekly basis
|
|
|
|
brainbudt
Newbie
Offline
Activity: 11
Merit: 0
|
|
May 15, 2018, 01:12:44 PM |
|
hey does -N, --statsavg change the output time or does this change how long the data it collect to create a avg?
|
|
|
|
VitorBrutes
Newbie
Offline
Activity: 3
Merit: 0
|
|
May 15, 2018, 05:54:37 PM |
|
Good afternoon people, I would like a little help if possible. First I started mining in Minepool, the first few days the reward was coming correctly (roughly what I should be comparing with whattomine). A few days later I realized that I had some huge payment gaps and the reward was already 20% below the estimate. This really was a much smaller pool than Ravenpool, so I decided to go for 3 consecutive days to Raven, but the payoff was up to 20-30% on average, I think. Then again, I voted to mine at Minepool and for 2 consecutive days the payoff was excellent (5-10% higher than the estimate). But from yesterday afternoon until today the business got complicated there and is several hours without block reward, much lower than the average that was great so far. Is there a pool that really trusts? Or does this really have to do with luck factor in the block break in the pool that I'm mining? I'm using the latest version of Enemy and am seriously considering mining alone. What is the minimum hash that would be suitable for good soil mining? Sorry for all the questions, but I really need some help. Thank you anyways.
|
|
|
|
|