Morama
Member
Offline
Activity: 104
Merit: 44
|
|
May 15, 2018, 06:02:48 PM |
|
1.09a is reporting more Hashrate in Console Window of each Rig, but the summed reported hashrate of Suprnova is much lower than with 1.08. 1.08 - ~190 MH/s 1.09a - ~150 MH/s Why?
|
|
|
|
@enemy (OP)
Member
Offline
Activity: 81
Merit: 16
|
|
May 15, 2018, 07:04:05 PM |
|
( Service release) zealot/enemy-1.09b (z-enemy) - Fixed compatibility issues that resulted in performance degradation with some non-yiimp pools. Now you'll see the expected hashrate on them. - Kernels speed improvements : +1-2% performance due to optimizations. - Support new algos : Tribus (-a tribus), recommended intensity for Tribus 20-21. Basic improve , can be a bit faster (+5-10%) vs public miners. Link inside our test discord https://discord.gg/Ga8kUTr
|
RVN: RFQXKVKpHMwyJ86YqQUJSZK1S8m8oRbC5h
|
|
|
felio
Newbie
Offline
Activity: 9
Merit: 0
|
|
May 15, 2018, 09:51:32 PM |
|
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.
[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK [NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK [DEV ] 18/05/13 09:58:34 Mining some dev fee 1.00501% [DEV ] 18/05/13 12:29:03 Done mining dev fee. [DEV ] 18/05/13 12:29:03 Ratio: 22.0877% [INFO ] 18/05/13 12:29:06 zealot/enemy-1.09a miner [INFO ] 18/05/13 12:29:06 NVIDIA CUDA 9.1 [INFO ] 18/05/13 12:29:06 Dev fee is 1.0% [NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------
It wasn't mining on my pool for 5+ hours. Seems like it just paused from 7:17 until 9:58. Then mined dev fee for 2 and a half hours. I'd post screen grabs but I think I'm too new to post pics.
In the last 24 hours now it has maintained a 1% dev fee. It did crash once in that time, but the dev fee it is reporting is 1%. My pool side hashrate looks right on the mining pool page. Are you solo mining ? No I'm mining btx on yiimp. Please do not overclock your GPU too much ! The program stuck and did not perform work with GPU from 07:17:08 , there are no blocks inside a dev fee too and after no block/accepted shares. We will add software watchdog in future releases, but again - please use recommended settings and OC only after miner work stable and LONG time. About defender... Miner is packed and Microsoft can't unpack the file and thinks, a virus there. Nothing new. There was no overclocking and power level was set to 80%. GPUs never went above 64 degrees.
|
|
|
|
pitt59
Newbie
Offline
Activity: 100
Merit: 0
|
|
May 16, 2018, 08:04:02 AM |
|
i get stratum connection error when i start the miner, anyone know whats wrong
|
|
|
|
Marvell2
|
|
May 16, 2018, 09:19:54 AM |
|
my hash rate seems considerably higer with the 1.09b a good 5 to 10%
|
|
|
|
daiv095
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 16, 2018, 07:18:15 PM |
|
my hash rate seems considerably higer with the 1.09b a good 5 to 10%
please link to download.
|
|
|
|
grendel25
Legendary
Offline
Activity: 2296
Merit: 1031
|
|
May 16, 2018, 07:23:10 PM |
|
my hash rate seems considerably higer with the 1.09b a good 5 to 10%
please link to download. this is from a few posts above: "Link inside our test discord https://discord.gg/Ga8kUTr "
|
|
|
|
Cuem
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 16, 2018, 10:28:38 PM |
|
Ennemy miner has been causing me headaches with stratum/ravenminer pool. I keep getting disconnects
|
|
|
|
ULF
Newbie
Offline
Activity: 75
Merit: 0
|
|
May 16, 2018, 11:32:03 PM Last edit: May 17, 2018, 03:30:08 AM by ULF |
|
I finally got z-enemy 1.08 working..BTX but not result others report. Is run consistent over 1 hash less than SPMod2 on PNY GTX 1060 6GB OC also below on EVGA 1080ti rig, so far testing now... Temps about same for both compares. Any ideas why not get better results that others report? btw is set intensity 20, tried many power clock and memory include -mem Enemy did run 100 power +150 clock +500 mem on already OC GTX 1060 top at 2100 Evga 1080ti Blacks are micron mem (disappointment) and will hardly boost at all. still between both very different behavior rigs there absolute zero problem except disappoint hash. anyone have idea can explain this?
|
|
|
|
mafaz
Newbie
Offline
Activity: 48
Merit: 0
|
|
May 17, 2018, 08:09:23 PM |
|
how to add this miner to lets say nemosminer or blazepool miner?
|
|
|
|
HashAuger
Newbie
Offline
Activity: 481
Merit: 0
|
|
May 17, 2018, 08:22:16 PM |
|
how to add this miner to lets say nemosminer or blazepool miner?
If you would like to use the latest version of this miner with Blazepool, you could try my software: Hash Auger https://hashauger.com. Unlike those other programs, I include support for the latest version (1.09b) of Z-Enemy by default and BlazePool is one of several auto-exchange pools that are supported.
|
|
|
|
slim6y
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 17, 2018, 08:26:52 PM |
|
1.09b is the best yet! The Search Mode really picked up shares in the low difficulty range. Really happy with that.
So I have algo requests:
I would love to see this on Lyra2z, especially with Infinex and Gin Coin up and coming. Also Skein is a really rewarding algo right now too. And an oldie but a goodie, Neoscrypt really needs a boost.
I ask because I am tiny, 2 card rig, and even with the dev fee, I am getting considerably more shares than any other miner. And these are my most commonly used algos. Plus Lyra2z is the "summer option" being the low wattage, cool running algo.
|
|
|
|
Elder III
|
|
May 18, 2018, 01:35:23 AM |
|
i get stratum connection error when i start the miner, anyone know whats wrong
If you post your .bat file then someone might be able to point out any errors and give some insight on how to fix it. As it is now it's like telling a mechanic that you car doesn't run and expecting him to diagnose it over the phone with no additional information,
|
|
|
|
Marvell2
|
|
May 18, 2018, 04:01:46 AM Last edit: May 18, 2018, 07:55:13 AM by Marvell2 |
|
So is anyone here still solo mining? I feel like difficulty is still low enough it's almost worth the gamble if you can set it up.
You cant solo mine to the wallet , i tried that it only allows solo mining using CPU as far as I can tell, the problem too is all the mining tools out here are stratum not getwork like the wallet requires , Enemy devs can you add a getwork flag so I can test solo mining ? I have around 1.5 Ghs or hash and could rent more if i could get solo mining working via the wallet or a full node instaleld on liniux but I dont want to install the whole yimp framework just to solo mine **edit ** i gues you can using ccminer, what are the settings for using zealot for solo mining now that the diff has dropped to under 20k
|
|
|
|
Marvell2
|
|
May 18, 2018, 11:13:45 AM |
|
So is anyone here still solo mining? I feel like difficulty is still low enough it's almost worth the gamble if you can set it up.
You cant solo mine to the wallet , i tried that it only allows solo mining using CPU as far as I can tell, the problem too is all the mining tools out here are stratum not getwork like the wallet requires , Enemy devs can you add a getwork flag so I can test solo mining ? I have around 1.5 Ghs or hash and could rent more if i could get solo mining working via the wallet or a full node instaleld on liniux but I dont want to install the whole yimp framework just to solo mine **edit ** i gues you can using ccminer, what are the settings for using zealot for solo mining now that the diff has dropped to under 20k I just set up a yiimp pool on an old laptop, purely for solo mining. If you follow Tatar Xavatar's, youtubeguide and installation script it's pretty simple. Most coin wallets are installed the same way. Again, you can follow Xavatars youtube guides, look for his Verge tutorial. There is a discord channel if you get stuck. Took me a couple of hours. Interesting, i only have one machine i guess i could convert to linix, for now im using nevermore to solo mine a tad slower but works fine and with the decreased difficulty and lower ping it’s probably better for me to solo in the long run. I was getting 150ms ping on supernova and always get 1k coins lower than estimates. If. i get yimp up this weeken i’ll switch back to enemy thanks
|
|
|
|
@enemy (OP)
Member
Offline
Activity: 81
Merit: 16
|
|
May 18, 2018, 12:15:50 PM |
|
Z-ENEMY VER 1.10 (PUBLIC)
For Windows (Cuda 9.1) zealot/enemy-1.10 (z-enemy) From: Dk & Enemy
- Fixed compatibility issues that resulted in performance degradation with some non-yiimp pools. Now you'll see the expected hashrate on them (suprnova). - Kernels speed improvements : (1.09a vs 1.10) +1-2% total (all algos) and (1.09b vs 1.10)+1-2% for x16r &x16s. - Support & impove new algo : Tribus (-a tribus) , recommended intensity for Tribus 20-21. +5% speed vs 1.09b ( Service release)
|
RVN: RFQXKVKpHMwyJ86YqQUJSZK1S8m8oRbC5h
|
|
|
evren320
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 18, 2018, 01:38:40 PM |
|
i am running 13 x 1080ti without problems
|
|
|
|
@enemy (OP)
Member
Offline
Activity: 81
Merit: 16
|
|
May 18, 2018, 04:01:15 PM |
|
i am running 13 x 1080ti without problems
Thanks for report, usually there is not enough information about work on such "multi systems" rig
|
RVN: RFQXKVKpHMwyJ86YqQUJSZK1S8m8oRbC5h
|
|
|
fabioganga
|
|
May 18, 2018, 07:34:01 PM |
|
Z-ENEMY VER 1.10 (PUBLIC)
For Windows (Cuda 9.1) zealot/enemy-1.10 (z-enemy) From: Dk & Enemy
- Fixed compatibility issues that resulted in performance degradation with some non-yiimp pools. Now you'll see the expected hashrate on them (suprnova). - Kernels speed improvements : (1.09a vs 1.10) +1-2% total (all algos) and (1.09b vs 1.10)+1-2% for x16r &x16s. - Support & impove new algo : Tribus (-a tribus) , recommended intensity for Tribus 20-21. +5% speed vs 1.09b ( Service release)
Thank you so much for your hard work, I love z-enemy! May I ask if you have in mind to ever release an AMD compatible version or make z-enemy work with both Nvidia and AMD similar to Claymore Dual for ETH? I truly hate sgminer and I'd be extremely happy if you could dump it in the bin. Keep the great job up buddy!! ;-)
|
|
|
|
Cuem
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 19, 2018, 04:44:50 PM |
|
Version 1.10
Ennemy miner is still stalling whenever it switches from DEV fee back to normal pool. My miner stays open but just doesn't work and since the miner isn't closed, it's hard to monitor the crash,
|
|
|
|
|