Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin).

[crairezx20]

Guys can you share your hashrate for 1060 6gb/1070/1080ti with x16r algo.
 
I used 1.22 version of z-enemy my hashrate for 1060 is around 9mh/s for 1070 I got around 11mh/s for all 1080ti my hashrate is 23-27.

Can you recommend what clock is the best to mine on x16r algo if the electricity rate doesn't matter?

On x16r I am seeing 26-28 MH/s on my 1080TIs with 1.22 CUDA 10 running on ethOS 1.3.3.

In the first time that I run my 1080ti I can get almost 33-35mh/s but after a few hours the hashrate down to 23 to 27mh/s.
I'm using "Cuda 9.2  ( drivers ver 398+)" Are you using a default clock? Could you share some good clock and mclock settings, it seems that you can get better hashrate than mine.

I hope OhMyGod_company can develop a new software to push the GTX 1080ti for better performance like ETHpill.

[Strovu]

Hi,

When mining with z-enemy 1.22 using 2 GPU it works like a charm. but when I try to use -d=0 or -d=1 tu use onoly one GPU it outputs this error: Non-existant CUDA device '=1' specified in -d option

Is anyone getting this?

[joseph32]

Hi,

When mining with z-enemy 1.22 using 2 GPU it works like a charm. but when I try to use -d=0 or -d=1 tu use onoly one GPU it outputs this error: Non-existant CUDA device '=1' specified in -d option

Is anyone getting this?

It is -d 0,1

[vrottenberg]

hi,
how to back to main pool?
in ccminer - failover [--time-limit=3300]
how to back to main pool in  Zealot/Enemy (z-enemy)?

[ZedZedNova]

Guys can you share your hashrate for 1060 6gb/1070/1080ti with x16r algo.
 
I used 1.22 version of z-enemy my hashrate for 1060 is around 9mh/s for 1070 I got around 11mh/s for all 1080ti my hashrate is 23-27.

Can you recommend what clock is the best to mine on x16r algo if the electricity rate doesn't matter?

On x16r I am seeing 26-28 MH/s on my 1080TIs with 1.22 CUDA 10 running on ethOS 1.3.3.

In the first time that I run my 1080ti I can get almost 33-35mh/s but after a few hours the hashrate down to 23 to 27mh/s.
I'm using "Cuda 9.2  ( drivers ver 398+)" Are you using a default clock? Could you share some good clock and mclock settings, it seems that you can get better hashrate than mine.

I hope OhMyGod_company can develop a new software to push the GTX 1080ti for better performance like ETHpill.

your mileage and hash rate may vary, but this is what I am using:

Code:

flags -a x16r -i 21.5 -R 5
globalcore +175
globalmem -502
globalfan 20
globalpowertune 180

I have it limited to 180 Watts per card, you can let it go higher if you want. These same settings with z-enemy 1.10 on CUDA 9 were yielding 18-20 MH/s per card.

The free ethlargementpill only works for memory hungry algos and only on cards with GDDR5X VRAM. If you want something more, consider becoming a customer of OhGodACompany and see what they have available.

[jazz1984]

Guys can you share your hashrate for 1060 6gb/1070/1080ti with x16r algo.
 
I used 1.22 version of z-enemy my hashrate for 1060 is around 9mh/s for 1070 I got around 11mh/s for all 1080ti my hashrate is 23-27.

Can you recommend what clock is the best to mine on x16r algo if the electricity rate doesn't matter?

x16r is not very dependent on the speed of the memory, but is very hot and requires a lot of energy, so set the maximum stable values ​​for the core and make sure that your power supply can deliver enough power.
In fact, there are no universal settings, try +100Mhz on core, if it will be cool and stable, add 25Mhz else reduce by 25 ...

[Quarknet]

Guys can you share your hashrate for 1060 6gb/1070/1080ti with x16r algo.
 
I used 1.22 version of z-enemy my hashrate for 1060 is around 9mh/s for 1070 I got around 11mh/s for all 1080ti my hashrate is 23-27.

Can you recommend what clock is the best to mine on x16r algo if the electricity rate doesn't matter?

On x16r I am seeing 26-28 MH/s on my 1080TIs with 1.22 CUDA 10 running on ethOS 1.3.3.

What is the core/memory clock?

[ZedZedNova]

Guys can you share your hashrate for 1060 6gb/1070/1080ti with x16r algo.
 
I used 1.22 version of z-enemy my hashrate for 1060 is around 9mh/s for 1070 I got around 11mh/s for all 1080ti my hashrate is 23-27.

Can you recommend what clock is the best to mine on x16r algo if the electricity rate doesn't matter?

On x16r I am seeing 26-28 MH/s on my 1080TIs with 1.22 CUDA 10 running on ethOS 1.3.3.

What is the core/memory clock?

Scroll up a few messages. I posted what offsets I am using for core and mem.

[Nalut]

I've been playing with this miner for two days using my 1080TI rig, getting "unspecified launch failure" error every hour.
Interesting thing about the x16r algo is effected by the Enlargementpill , it does work with this miner on x16r algo and the hashrate for a single 1080TI reached 36mh but the rig crashes and MSI AF reset the OC to default setting on a few gpus on rig.
Running miner for a couple of days to figure out a solution to the first mentioned error.
Current OC PL 65 core +100  mem -200
Cuda 10 driver 416
4x 1080 ti ftw3
2x 1070 ftw2

[S780]

Just a result...

https://i.yapx.ru/CgNKg.jpg

https://i.yapx.ru/CgNKi.jpg

[Nalut]

Just a result...

https://i.yapx.ru/CgNKg.jpg

https://i.yapx.ru/CgNKi.jpg

Using Enlargementpill? Is it stable no crashing?

[S780]

I guess that Enlargementpill uses only for eth algo...

Yes...no crash

[Miner108]

Hello!
how to back to main pool?
I set up backup pools in the file config.json. - It's work fine, but how to back to main pool?
run miner through start.bat.

[Nalut]

I guess that Enlargementpill uses only for eth algo...

Yes...no crash

Then how did you achieve 38mh ??
I am interested to know how

[S780]

I use Ubuntu Linux...

[AnatoliyY]

I use Ubuntu Linux...

you can show bat file? for 1080ti

[S780]

z-enemy -a x16r -o stratum+tcp://ravenminer.com:3666 -u RUTes95Us3BEk******BatLGnxL3dWguNnS -p x  -i 21

[Nalut]

z-enemy -a x16r -o stratum+tcp://ravenminer.com:3666 -u RUTes95Us3BEk******BatLGnxL3dWguNnS -p x  -i 21

My rig speed is not stable, I am getting 20mh~31mh with 1080 TI, win 10 64x
Do you recommend to change OS to Linux? 

[lyolyalya]

any stability issues with 4xx drivers using 10xx cards?
have a rig with 1080ti+1080+5x1070+1060
with 399 drivers it works fine
with 4xx drivers(all versions) rig begins to be unstable after few hours of mining.
1.22 ver, win10x64

[crairezx20]

z-enemy -a x16r -o stratum+tcp://ravenminer.com:3666 -u RUTes95Us3BEk******BatLGnxL3dWguNnS -p x  -i 21

My rig speed is not stable, I am getting 20mh~31mh with 1080 TI, win 10 64x
Do you recommend to change OS to Linux?  

I can also get the 35/mhs but sometimes the hashrate drop its not stable. I'm using win 10 64x.
I think the hashrate from Linux is not the same as reported hashrate from the pool so ETHpill won't work to improve your hashrate. unless if he can give us real proof with video including the settings and pool dashboard.

Take a look at my hashrate below