WickedPigeon
Member
Offline
Activity: 345
Merit: 16
|
|
February 22, 2019, 03:14:20 PM |
|
Hi Dev Hi x16r Comunity Hi z-enemy comunity I have a Rig with 3 1080 and 4 1080TI. For months they have been running just fine. Since about a week (I installed the latest NVIDIA Driver) one of the 1080TIs keeps crashing around 15 mins after starting the miner. The "good" thing is, it doesnt seem to kill the miner and I would only notice it when checking power consumption or looking at GPU temps in Afterburner. GPU fans keep spinning etc. I havnt had time yet to debug (e.g. run card in isolation, revert driver, try different mining software, etc). But before I start debugging, I would like to ask if anyone had experienced a similar issue and maybe solved it; please let me know; also appreciate any suggestion for debugging Mining x16r on ravenminer EU, +20CC, -502MC, 70%PL. What other information would you need? Thanks in advance for any help. Slow I've had problems somewhat like this in the past, and it was the power supply. X16 can have moments where it pulls so much that it overloads the PSU and one or two of the GPUs stop working. Just a thought. Good luck
|
“How did you go bankrupt?” Bill asked.
“Two ways,” Mike said. “Gradually and then suddenly.”
|
|
|
ggarbi
Jr. Member
Offline
Activity: 43
Merit: 1
|
|
February 24, 2019, 04:43:06 AM |
|
Why there isnt any update from zenemy team after 1.28? Updates came out very fast before, are they still working on the software ? Because competitors are taking the miners away to be honest.
|
|
|
|
Vispilio
Legendary
Offline
Activity: 2128
Merit: 1657
|
|
March 01, 2019, 06:40:14 AM Last edit: March 01, 2019, 07:11:58 AM by Vispilio |
|
hi, is this still the best miner for RVN, or has it been eclipsed in the recent couple of months,
beginning of the year v 1.28 was arguably the strongest performer in the market for x16r Algo...
|
|
|
|
ggarbi
Jr. Member
Offline
Activity: 43
Merit: 1
|
|
March 02, 2019, 05:47:04 PM |
|
hi, is this still the best miner for RVN, or has it been eclipsed in the recent couple of months,
beginning of the year v 1.28 was arguably the strongest performer in the market for x16r Algo...
Trex 9.2 is little better my friend
|
|
|
|
du44
|
|
March 03, 2019, 12:06:53 AM |
|
hi, is this still the best miner for RVN, or has it been eclipsed in the recent couple of months,
beginning of the year v 1.28 was arguably the strongest performer in the market for x16r Algo...
Trex 9.2 is little better my friend It's not little better. it's much better by 5-10%
|
hello
|
|
|
JerzyKiler
Newbie
Offline
Activity: 5
Merit: 0
|
|
March 03, 2019, 10:38:06 PM |
|
Could you please add a Linux release for CUDA 10.1? I need to have CUDA 10.1 on my machines, but I keep getting the following error:
z-enemy: error while loading shared libraries: libcudart.so.10.0: cannot open shared object file: No such file or directory
|
|
|
|
Keko Fdez
Jr. Member
Offline
Activity: 108
Merit: 7
|
|
March 15, 2019, 09:10:12 AM |
|
Does Zealot miner support algo X16RT?
Many pools say so but I can’t make it work with that algo
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3206
Merit: 1003
|
|
March 15, 2019, 05:21:06 PM |
|
Does Zealot miner support algo X16RT?
Many pools say so but I can’t make it work with that algo
-help file to see or go to his discord channel. -a, --algo=ALGO Coin hash algorithm to use: aergo (AeriumX: AEX) bitcore (Bitcore: BTX) bcd (Bitcoin Diamond: BCD) x16r (X16R: Raven, ) x16s (X16S: Pigeon) x17 (X17: Verge) c11 (C11: CHC) phi (PHI1612: Folm, Seraph) phi2 (PHI2: LUXCoin) tribus (Tribus: Denarius) poly (Poly: Polytimos) skunk (Skunk: Skunk) sonoa (Sonoa: SONO) hex (Hex: HEX) timetravel (Machinecoin: MAC) xevan (Xevan: Transend)
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
March 15, 2019, 09:55:08 PM |
|
Linux links for 1.28 on Mega seem to be sending WINDOWS version - tried all 3, "invalid executable format" error on all 3 under XUbuntu.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
spider703
|
|
March 15, 2019, 10:09:09 PM |
|
Linux links for 1.28 on Mega seem to be sending WINDOWS version - tried all 3, "invalid executable format" error on all 3 under XUbuntu.
Download from mirror ftp:// radio.r41.ru Copy link and del space
|
BTC 1Hof999zuqUKpifmzrSABv7tNr4nRaoJKM LTC Lf2L6DTBr2gXT38d7cVRqDQiHMndtXQyNW or write me in https://t.me/spider703
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
March 15, 2019, 10:45:24 PM Last edit: March 15, 2019, 10:55:50 PM by QuintLeo |
|
2 of the 3 links point to files that don't exist - missing the .gz at the end. Good thing I normally use actual FTP to talk to FTP servers, not links.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
spider703
|
|
March 15, 2019, 10:51:42 PM |
|
2 of the 3 links point to files that don't exist - missing the .gz at the end. Good thing I normally use actual FTP to talk to FTP servers, not links.
If you go to ftp you can see all miners from z-enemy in root directory
|
BTC 1Hof999zuqUKpifmzrSABv7tNr4nRaoJKM LTC Lf2L6DTBr2gXT38d7cVRqDQiHMndtXQyNW or write me in https://t.me/spider703
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
March 16, 2019, 01:06:13 AM |
|
2 of the 3 links point to files that don't exist - missing the .gz at the end. Good thing I normally use actual FTP to talk to FTP servers, not links.
If you go to ftp you can see all miners from z-enemy in root directory Yup, and the tar.gz files decompressed and run, but even with having just installed the 418 drivers I'm getting a "can't find shared library libcudartxx" error on each one, with the missing library having a number matching the z-enemy version.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
spider703
|
|
March 16, 2019, 01:26:49 AM |
|
2 of the 3 links point to files that don't exist - missing the .gz at the end. Good thing I normally use actual FTP to talk to FTP servers, not links.
If you go to ftp you can see all miners from z-enemy in root directory Yup, and the tar.gz files decompressed and run, but even with having just installed the 418 drivers I'm getting a "can't find shared library libcudartxx" error on each one, with the missing library having a number matching the z-enemy version. Try 417.+ drivers
|
BTC 1Hof999zuqUKpifmzrSABv7tNr4nRaoJKM LTC Lf2L6DTBr2gXT38d7cVRqDQiHMndtXQyNW or write me in https://t.me/spider703
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
March 17, 2019, 10:02:22 AM Last edit: March 17, 2019, 10:36:28 AM by QuintLeo |
|
2 of the 3 links point to files that don't exist - missing the .gz at the end. Good thing I normally use actual FTP to talk to FTP servers, not links.
If you go to ftp you can see all miners from z-enemy in root directory Yup, and the tar.gz files decompressed and run, but even with having just installed the 418 drivers I'm getting a "can't find shared library libcudartxx" error on each one, with the missing library having a number matching the z-enemy version. Try 417.+ drivers "...having just installed the 418 drivers..." I'm pretty sure those are "417.+" To be picky the ones I installed are the LATEST 418.43 driver version. There is no LINUX driver with a 417 version number - the previous versions are an older 418 version then a couple of 415 versions, if you're suggesting "417.something" specifically. (UPDATE) The Cuda RT files are NOT part of the drivers - they are part of the bloody CUDA TOOLKIT, which isn't mentioned ANYWHERE in what instructions I can find - though you can find the 9.1 version as an "apt-get" accessable package, the later ones don't seem to be available from Canonical forcing you to download the ENTIRE TOOLKIT from Nvidia if you want the later CUDA versions. Now I'm trying to figure out another error about a curl-related missing library. (UPDATE 2) That one turned out to be fairly simple, found several mentions of it apt install libcurl3 libcurl-openssl1.0-dev There really needs to be an INSTALL GUIDE for the LINUX version of this, or at least SOME SORT of instructions, distributing the LINUX version as just the program itself makes it a NIGHTMARE to get installed and working.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
cryptoyes
Member
Offline
Activity: 297
Merit: 10
|
|
March 18, 2019, 03:00:21 AM |
|
There really needs to be an INSTALL GUIDE for the LINUX version of this, or at least SOME SORT of instructions, distributing the LINUX version as just the program itself makes it a NIGHTMARE to get installed and working.
This is a money-making task in a competitive market so there is no incentive (nor is it rationally justifiable) writing tutorials to help others (usually lazy gits) make money without effort, since that would mean they'd make money on your efforts. Feel free to write those docs though p.s. No, this isn't equivalent to open-source software.
|
|
|
|
crv
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 19, 2019, 12:17:06 PM |
|
Hello, please help. Can't set max temp and resume temp in command line. If somebody know right commands please help.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3206
Merit: 1003
|
|
March 22, 2019, 01:37:53 PM |
|
hi use latest hive os how to add command intensity i try use -i 20 but in ccminer still showing intensity 21, please help Go ask in his discord channel... maybe get a quicker answer. I don't know Hive OS... but -i 20 should work.
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
A humble Siberian miner
|
|
March 22, 2019, 04:59:54 PM |
|
v1.28 refused to start on my Ubuntu 18.10 installation. Something about "error while loading shared libraries: libcudart.so.10.0". Cryptodredge started completely OK on the same rig without any actions from my side. Maybe there's something wrong with z-enemy...
|
|
|
|
HFreeman
Newbie
Offline
Activity: 23
Merit: 1
|
|
March 28, 2019, 08:40:49 PM |
|
Hello, please help. Can't set max temp and resume temp in command line. If somebody know right commands please help.
Try this : --max-temp=75 --resume-temp=60
|
|
|
|
|