SxC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 18, 2014, 08:44:06 PM |
|
When is the block reward changing?
still very very long time Block reward: 50, halving every 990,000 blocks currently only 214387 Block reward is changing very soon to 15 coins per block Maybe 1-2 weeks away
|
|
|
|
funsponge
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 18, 2014, 09:26:57 PM |
|
Enough of the logo designs! The one we have is fine and isn't changing! Quit wasting ur time on them and use ur time more constructively, such as tweeting or spreading the word to get more people involved in our community.
|
|
|
|
untalented
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 18, 2014, 09:30:16 PM |
|
@untalented Nice work on the logo! New version looks a lot smoother. It resembles a coin a more but doesn't go too much towards an 'iconized' logo. Personnaly I would skip the rounded text for the following three reasons: - too many technical terms (non tech savvy persons might get scared
) - if any of the terms would change in the future you'd have to replace the base logo (which can be a real pain in the *** when it's widely used)
- the text would become hard to read and make the logo less readable when using smaller versions of the logo (small chest logo on a T-shirt, favicon, small logo's on the various exchanges)
In regards to the rounded text, the mention of the transaction time could be done as kind of a slogan below the actual logo. That way you can use the logo separately or combine it with a slogan. Then depending on it's use, use one or the other. Adjusting the slogans would not affect the base logo. For example, when using it in an arbitrage context the 6 sec. transaction time is great, for mining the ASIC resistance makes sence and general promotional 'Ultrafast' would be a very good one. It gives you much more flexibility. Thank you i don't make that logo, i'm untalented ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I just came up with this idea and commissioned that to a three specialists. Bumface suggested earlier to keep the letter u with stripes, I think it was a good idea to keep the recognition of the original logo. I wanted to be just a little refresh and modernize in the face of imminent positive changes in UTC. I do this only for you all. Your suggestions is very good. Updates soon:)
|
|
|
|
Gleason
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 01:15:32 AM |
|
These just arrived to me today! Ultracoin physical 1.5" Black Nickel collector coin! I did a limited batch of 100 coins. They are individually number 1/100 through 100/100 . Here is a quick picture. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi58.tinypic.com%2Fekjfyx.jpg&t=663&c=1t6hXA0IDNHutA) Front side has a UTC logo with a coin design I made. The backside has some coin information ( coin release date, total coin supply, coin type ) More pictures to follow, and I will update them on my website as well! I'm going to start these at an Intro price of $11 for each coin! http://www.cryptomemorabilia.com/product/ultracoin-collector-physical-coin/-Brian Gleason http://www.cryptomemorabilia.comThat looks great man!!
Wow! this is really nice ! =D
Thanks for the compliments. They came out exactly how I wanted them too! Sold a few today, that have shipped out! -Brian Gleason http://www.cryptomemorabilia.com/
|
|
|
|
junkun13
Newbie
Offline
Activity: 49
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 01:49:09 AM |
|
It's raining orphans on nitro 1
|
|
|
|
thaitunhi1606
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 111
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 03:54:49 AM |
|
Nitro 1: 26MH/s Nitro 2: 67MH/s Greekpool: 16MH/s --> SO SAD Plz change your config from nitro 2 to Nitro1 and Greekpool.
|
|
|
|
Vasya
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 167
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 07:19:20 AM |
|
When is the block reward changing?
still very very long time Block reward: 50, halving every 990,000 blocks currently only 214387 Block reward is changing very soon to 15 coins per block Maybe 1-2 weeks away to calculate the 700,000 units very little 1-2 weeks
|
|
|
|
|
boubou
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 10:21:52 AM |
|
I can't mine this coin: I get 0 accepted share, lots of Hardware errors, no matter what. I have 2 7950, I tryed nitropool since it seemed good. Here is my .conf on a PIMP distro using sgminer sgminer 4.1.0-6-gd74e: , "auto-fan" : true, "intensity" : "12", "vectors" : "1", "worksize" : "256", "lookup-gap" : "2", "thread-concurrency" : "0", "shaders" : "0", "api-listen" : true, "api-port" : "4028", "api-allow" : "W:127.0.0.1", "gpu-threads" : "1", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-engine" : "0", "gpu-memclock" : "0", "gpu-powertune" : "20", "gpu-vddc" : "0.00", "gpu-fan" : "0-100", "temp-hysteresis" : "3", "temp-cutoff" : "95", "temp-overheat" : "90", "temp-target" : "72", "log" : "5", "no-pool-disable" : true, "queue" : "1", "shares" : "0", "kernel-path" : "/usr/local/bin", "scrypt-jane" : true, "sj-nfmin" : "4", "sj-nfmax" : "30", "sj-time" : "1388361600" I tryed various Thread Concurrency, and Intensity, still no share and some Hardware errors. I'm not in having the best hasrate, but at least having 1 valid share will be a good start. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
BEHNZiP6UZunp41vurNaQi4r2hvgG57yzi : BdG
|
|
|
bullus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 10:27:32 AM |
|
I can't mine this coin: I get 0 accepted share, lots of Hardware errors, no matter what. I have 2 7950, I tryed nitropool since it seemed good. Here is my .conf on a PIMP distro using sgminer sgminer 4.1.0-6-gd74e: , "auto-fan" : true, "intensity" : "12", "vectors" : "1", "worksize" : "256", "lookup-gap" : "2", "thread-concurrency" : "0", "shaders" : "0", "api-listen" : true, "api-port" : "4028", "api-allow" : "W:127.0.0.1", "gpu-threads" : "1", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-engine" : "0", "gpu-memclock" : "0", "gpu-powertune" : "20", "gpu-vddc" : "0.00", "gpu-fan" : "0-100", "temp-hysteresis" : "3", "temp-cutoff" : "95", "temp-overheat" : "90", "temp-target" : "72", "log" : "5", "no-pool-disable" : true, "queue" : "1", "shares" : "0", "kernel-path" : "/usr/local/bin", "scrypt-jane" : true, "sj-nfmin" : "4", "sj-nfmax" : "30", "sj-time" : "1388361600" I tryed various Thread Concurrency, and Intensity, still no share and some Hardware errors. I'm not in having the best hasrate, but at least having 1 valid share will be a good start. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Maybe try yacminer, see my previous post https://bitcointalk.org/index.php?topic=413978.msg6245956#msg6245956
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
ECF
Newbie
Offline
Activity: 42
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 10:36:42 AM |
|
|
|
|
|
pieterjanvh
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 11:40:21 AM |
|
Very nice logo's (un)talented!
All the upcoming updates are quite nice Bumface, but how about marketting? Can't u hire a firm to do it for you? We really need to expand the community, the way I see it there are only 5-6 people actually doing stuff for UTC, which is far from enough...
|
|
|
|
Jacques21
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 11:41:13 AM |
|
Website | Twitter | BitcointalkHi,UltraCoin Community We have added UTC to ECOINFUND.( UTC/BTC, UTC/LTC) Multi-language Alt-Coin Exchange,Fast, Secure and Trustworthy. Big ECC GIVEAWAY before 30.April:Tweet this green text on your own twitter account and recive 50ECC( ECC Details): ecoinfund.com |New Exchange,multi-language support,Earn 50ECC(fee shares) by every retweet before 30 April,don't miss the train! Pls post your twitter link and Ecoinfund ID on our bitcointalk thread or pm us. ECF Coin (ECC for short) is the fee share program launched by Ecoinfund. Ecoinfund will commit 50% of trade revenue to ECC program. (highest on market) Giveaway more infomation: https://bitcointalk.org/index.php?topic=501030.msg6165826#msg6165826Happy trading ! Awesome exchange ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
bumface (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 11:45:20 AM |
|
Very nice logo's (un)talented!
All the upcoming updates are quite nice Bumface, but how about marketting? Can't u hire a firm to do it for you? We really need to expand the community, the way I see it there are only 5-6 people actually doing stuff for UTC, which is far from enough...
yeah we can use more marketing, but right now there is no budget for that in btc or in usd.
|
|
|
|
untalented
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 11:55:20 AM |
|
@pieterjanvh Thank you I'm glad you like it I think i got some good idea ![Cool](https://bitcointalk.org/Smileys/default/cool.gif)
|
|
|
|
boubou
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 11:57:16 AM |
|
I can't mine this coin: I get 0 accepted share, lots of Hardware errors, no matter what. I have 2 7950, I tryed nitropool since it seemed good. Here is my .conf on a PIMP distro using sgminer sgminer 4.1.0-6-gd74e: , "auto-fan" : true, "intensity" : "12", "vectors" : "1", "worksize" : "256", "lookup-gap" : "2", "thread-concurrency" : "0", "shaders" : "0", "api-listen" : true, "api-port" : "4028", "api-allow" : "W:127.0.0.1", "gpu-threads" : "1", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-engine" : "0", "gpu-memclock" : "0", "gpu-powertune" : "20", "gpu-vddc" : "0.00", "gpu-fan" : "0-100", "temp-hysteresis" : "3", "temp-cutoff" : "95", "temp-overheat" : "90", "temp-target" : "72", "log" : "5", "no-pool-disable" : true, "queue" : "1", "shares" : "0", "kernel-path" : "/usr/local/bin", "scrypt-jane" : true, "sj-nfmin" : "4", "sj-nfmax" : "30", "sj-time" : "1388361600" I tryed various Thread Concurrency, and Intensity, still no share and some Hardware errors. I'm not in having the best hasrate, but at least having 1 valid share will be a good start. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Maybe try yacminer, see my previous post https://bitcointalk.org/index.php?topic=413978.msg6245956#msg6245956Thanks, but the minner inside the PIMP linux usb system is SG-miner. By the way you don't see some obvious mistakes in my .conf that can cause the 0 accepted shares ??
|
BEHNZiP6UZunp41vurNaQi4r2hvgG57yzi : BdG
|
|
|
boubou
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 12:14:15 PM |
|
I can't mine this coin: I get 0 accepted share, lots of Hardware errors, no matter what. I have 2 7950, I tryed nitropool since it seemed good. Here is my .conf on a PIMP distro using sgminer sgminer 4.1.0-6-gd74e: , "auto-fan" : true, "intensity" : "12", "vectors" : "1", "worksize" : "256", "lookup-gap" : "2", "thread-concurrency" : "0", "shaders" : "0", "api-listen" : true, "api-port" : "4028", "api-allow" : "W:127.0.0.1", "gpu-threads" : "1", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-engine" : "0", "gpu-memclock" : "0", "gpu-powertune" : "20", "gpu-vddc" : "0.00", "gpu-fan" : "0-100", "temp-hysteresis" : "3", "temp-cutoff" : "95", "temp-overheat" : "90", "temp-target" : "72", "log" : "5", "no-pool-disable" : true, "queue" : "1", "shares" : "0", "kernel-path" : "/usr/local/bin", "scrypt-jane" : true, "sj-nfmin" : "4", "sj-nfmax" : "30", "sj-time" : "1388361600" I tryed various Thread Concurrency, and Intensity, still no share and some Hardware errors. I'm not in having the best hasrate, but at least having 1 valid share will be a good start. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Maybe try yacminer, see my previous post https://bitcointalk.org/index.php?topic=413978.msg6245956#msg6245956I found Yacminer into my PIMP distro. I paste your own .conf file for the 7950. If I let the scrypt-chacha, I have no shares and Hardware errors, If I put Scrypt-Jane instead, I have no more Hardwre errors, but all shares are rejected (and I have 350Kh/s so I assume it's a Scrypt Kernel, not aScrypt Jane) By the way, with Yacminer, no need to specify the strange parameters: "sj-nfmin" : "4", "sj-nfmax" : "30", "sj-time" : "1388361600" I did not fond them in your .conf.
|
BEHNZiP6UZunp41vurNaQi4r2hvgG57yzi : BdG
|
|
|
Evilish
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 02:55:23 PM |
|
These look really good. Keep up the good work.
|
|
|
|
thaitunhi1606
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 111
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 04:06:16 PM |
|
I think we need creat Multipool UTC like BC. It help price UTC is UP.
|
|
|
|
batty634
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 04:08:10 PM |
|
you are right thaitunhi1606. there is a bounty in place for multipool
|
|
|
|
|