[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[flobdeth]

r9 270 config? , please !!  

color 6
ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 81920 -I 18 -o stratum+tcp://xxx:3333 -u xxx -p xxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --gpu-engine 1080 --gpu-memclock 1500 --no-submit-stale --expiry 20 --scan-time 5

[primouno]

r9 270 config? , please !!  

color 6
ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 81920 -I 14 -o stratum+tcp://xxx:3333 -u xxx -p xxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --gpu-engine 1080 --gpu-memclock 1500 --no-submit-stale --expiry 20 --scan-time 5

What hashrate do you get?

[flobdeth]

What hashrate do you get?

Down from 49 this morning to 15, -I 18 no longer works, I needed to lower it, but 0 HW or rejects, will play around some more later

[xwebnetwork]

With tweaking, we should be able to pull around 22-25KHs.

[hanvude2424]

Down from 49 this morning to 15, -I 18 no longer works, I needed to lower it, but 0 HW or rejects, will play around some more later

you get 49 kh/s with r9 270 before nfactor ?? i guess you talk about r9 280x !!  

[flobdeth]

Down from 49 this morning to 15, -I 18 no longer works, I needed to lower it, but 0 HW or rejects, will play around some more later

you get 49 kh/s with r9 270 before nfactor ?? i guess you talk about r9 280x !!  

nope, Gigabyte 4 gig R270x

[longyenthanh]

What hashrate do you get comparing to before factor change? I have 1/3 of what I had before. Is it correct? I had 30 Kh/s now I get 9 Kh/s.

My R9 270 config (still tweaking):

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del scrypt*.bin
timeout /t 60
cgminer -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxxxx -p xxxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 128 -I 12 --thread-concurrency 70400 -g 1 --lookup-gap 6 --gpu-engine 1150 --gpu-memclock 1450 --gpu-powertune 20 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --temp-cutoff 90 --temp-overheat 85

Are u using 16GB of Ram ?

[KingCole]

With tweaking, we should be able to pull around 22-25KHs.

What are you getting at the moment? I seem to recall you and I had similar configs previously

KC

[fredeq]

WTM updated with ultracoin nf13. Be sure to check nf13 box and input new hr/power.

http://www.whattomine.com/coins

[barbados-fs]

r9 270 config? , please !!  

color 6
ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 81920 -I 14 -o stratum+tcp://xxx:3333 -u xxx -p xxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --gpu-engine 1080 --gpu-memclock 1500 --no-submit-stale --expiry 20 --scan-time 5

What hashrate do you get?

I have these settings does not run.

[barbados-fs]

нa 280x я пoлyчaю 17кH/c нa чacтoтe  GPU 1100 

HW=0

SET GPU_MAX_ALLOC_PERCENT=100
yacminer.exe --scrypt-chacha -o stratum+tcp://stratum.ultracoinpool.info:3333 -u barbados-2 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra.leetpools.com:3333 -u barbados-2 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra2.nitro.org:4337 -u barbados-2 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra.nitro.org:3337 -u barbados-2 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -R 8000 -g 1 -w 256 --buffer-size 2656 --lookup-gap 6 --auto-fan --temp-cutoff 86 --temp-overheat 80 --gpu-fan 85-95 2>logfile.txt

нa 270x пoлyчaю 10,5кH/c нa чacтoтe GPU  1200

 HW=0

SET GPU_MAX_ALLOC_PERCENT=100
yacminer.exe --scrypt-chacha -o stratum+tcp://stratum.ultracoinpool.info:3333 -u barbados-1 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra.leetpools.com:3333 -u barbados-1 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra2.nitro.org:4337 -ubarbados-1 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra.nitro.org:3337 -u barbados-1 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -g 1 -w 256 -R 10000 --buffer-size 1576 --lookup-gap 7 --auto-fan --temp-cutoff 90 --temp-overheat 85 --gpu-fan 75-95 2>logfile.txt

[flobdeth]

r9 270 config? , please !!  

color 6
ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 81920 -I 14 -o stratum+tcp://xxx:3333 -u xxx -p xxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --gpu-engine 1080 --gpu-memclock 1500 --no-submit-stale --expiry 20 --scan-time 5

What hashrate do you get?

I have these settings does not run.

Because you're using Yacminer

FYI: the mining calc on the main page is an epic tool....use it   I just added some extras to mine, works perfectly

EDIT: if any of you miners don't have this page bookmarked, go stand in the corner and be ashamed of yourselves    https://litecoin.info/Mining_hardware_comparison

[primouno]

What hashrate do you get comparing to before factor change? I have 1/3 of what I had before. Is it correct? I had 30 Kh/s now I get 9 Kh/s.

My R9 270 config (still tweaking):

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del scrypt*.bin
timeout /t 60
cgminer -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxxxx -p xxxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 128 -I 12 --thread-concurrency 70400 -g 1 --lookup-gap 6 --gpu-engine 1150 --gpu-memclock 1450 --gpu-powertune 20 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --temp-cutoff 90 --temp-overheat 85

Are u using 16GB of Ram ?

No, only 4 GB

[carlo63]

Poloniex:

Markets for the following coins will be delisted on May 24th: FRK, UTC, MTS, KDC, PMC, TWE, CON, GPUC

 

[fredeq]

Poloniex:

Markets for the following coins will be delisted on May 24th: FRK, UTC, MTS, KDC, PMC, TWE, CON, GPUC

 

Delisting of UTC was put on hold. Chill, tune miners, check profitability

[flobdeth]

check profitability

SHHH let us work it some more before the others catch on 

[longyenthanh]

What hashrate do you get comparing to before factor change? I have 1/3 of what I had before. Is it correct? I had 30 Kh/s now I get 9 Kh/s.

My R9 270 config (still tweaking):

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del scrypt*.bin
timeout /t 60
cgminer -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxxxx -p xxxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 128 -I 12 --thread-concurrency 70400 -g 1 --lookup-gap 6 --gpu-engine 1150 --gpu-memclock 1450 --gpu-powertune 20 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --temp-cutoff 90 --temp-overheat 85

Are u using 16GB of Ram ?

No, only 4 GB

I set virutal Ram to 32GB, but still get error buffer if I set TH > 42000 

[longyenthanh]

What hashrate do you get comparing to before factor change? I have 1/3 of what I had before. Is it correct? I had 30 Kh/s now I get 9 Kh/s.

My R9 270 config (still tweaking):

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del scrypt*.bin
timeout /t 60
cgminer -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxxxx -p xxxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 128 -I 12 --thread-concurrency 70400 -g 1 --lookup-gap 6 --gpu-engine 1150 --gpu-memclock 1450 --gpu-powertune 20 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --temp-cutoff 90 --temp-overheat 85

Are u using 16GB of Ram ?

No, only 4 GB

I set virutal Ram to 32GB, but still get error buffer if I set TH > 42000 

nvm it works, I forgot to hit Ok when i sat virtual Ram Thank you

[barbados-fs]

r9 270 config? , please !!  

color 6
ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 81920 -I 14 -o stratum+tcp://xxx:3333 -u xxx -p xxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --gpu-engine 1080 --gpu-memclock 1500 --no-submit-stale --expiry 20 --scan-time 5

What hashrate do you get?

I have these settings does not run.

Because you're using Yacminer

FYI: the mining calc on the main page is an epic tool....use it   I just added some extras to mine, works perfectly

EDIT: if any of you miners don't have this page bookmarked, go stand in the corner and be ashamed of yourselves    https://litecoin.info/Mining_hardware_comparison

I have not yet suffer from senility, that would not distinguish settings under ultracoin-miner on the settings under Yacminer.

Of course, these are the settings I tried not to Yacminer

[barbados-fs]

On http://bitgo.pw/utc/
12   2048   Sun, 06 Apr 2014 02:10:08 GMT
13   4096   Sat, 24 May 2014 15:15:12 GMT
14   8192   Sat, 12 Jul 2014 04:20:16 GMT

On http://ultracoin.net/configgen_raw.html
I:11 =    2048 threads
I:12 =    4096 threads
I:13 =    8192 threads

Where is the truth?