[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[batty634]

thanks for the quick response and update bf

[1714766029]

1714766029

[1714766029]

1714766029

[1714766029]

1714766029

[1714766029]

1714766029

[1714766029]

1714766029

[1714766029]

1714766029

[PaulR1]

We are investigating this issue as we speak,however we are confident the new client is not the issue....

I have tweeted cryptsy and i have contacted the builder of the blockchain explorer, a second explorer is being built aswell

update: the blockchain explorer builder will update the site asap.

Thanks for your answer ....

did you look in to the DEV wallet, did you recieve 1 UTC i send to you as a test ?

[bumface]

We are investigating this issue as we speak,however we are confident the new client is not the issue....

I have tweeted cryptsy and i have contacted the builder of the blockchain explorer, a second explorer is being built aswell

update: the blockchain explorer builder will update the site asap.

Thanks for your answer ....

did you look in to the DEV wallet, did you recieve 1 UTC i send to you as a test ?

i recieved 1 utc at 17:07 dutch time

Status: 239 confirmations
Date: 10-5-2014 17:07
From: unknown
To: UV65rd1p2D5TcAihXm4vdSWy89tTLajoEf (own address, label: DONATIONS)
Credit: 1.00 UTC
Net amount: +1.00 UTC
Transaction ID: f25282807f6f1aa962f29b84568a57fb13eef1c6075bf3eda4129f3cb5dc933d


did you send it to an unobtainium adress by accident?

[3r197]

@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain


Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain

What can here to be the problem

 

I think this problem is with the block explorer site, the wallet is fully tested and 100% ok. we are working with some community members about making a second blockexplorer.the people working on this are scrypto and bret

the second problem might be at cryptsy`s end, im not sure.I do know that an un-updated wallet can still send and recieve UTC from an updated wallet....

I advise you to contact cryptsy about this issue ,please keep me informed about the situation

Thank for your quick answer.

I contacted already Cryptsy.
On there request I send them the transactions ID's.

The answer from Crypsty is the following;

Hello Paul,
Looking at the block explorer that transaction ID is not in the chain.
Your wallet may not be in sync and you might possibly have to re-download the block chain.

But is I wrote before, my wallet V1030 is fully synct and the green "V" is visible...

Any more ideas what can be the problem

Bumface, as a test, I just sent 1 UTC to the DEV Account. Just as test if you receive.

I know Bumface said that non-updated wallets could still send and receive transactions, but has Cryptsy updated their wallet?  Were all the exchanges contacted to make sure they had the new wallet as well?  Just trying to rule out in possible conflicts.  

@ Paul,
That's weird. I had about 6k coin in cryptsy that I bought on friday morning. I downloaded the new wallet friday night, and had no issues withdrawing that coin to my new wallet this Saturday morning.
I'm just letting ya'll know, so far I haven't had any issues related to new wallet and cryptsy. But that's only been one transaction since the new wallet download. I currently have 446 confirmations on the transaction this morning.
Sorry to hear the new... keep us updated.

@3r197

Withdraw from Cryptsy to my new wallet V1030 went also fine with me.
So I received the coins in the new wallet.
But the transaction ID's are not visible in the block chain.
Please check your transaction ID's if the are also not visible ok

The bigger problem is the deposit from coins out of my new wallet to my Cryptsy account.
In my new wallet I can see more then +800 confirmations of each transaction.
Also are the deposit transactions visible at my Cryptsy account but they are for hours and hours Pending at Cryptsy still with zero confirmations each.
And also here, the transactions ID's are not visible at the blochchain at all ...

Okay. Forgive the delayed response. I'm in the process of trying to sell my house and have a lot of people wanting to see it.
Also forgive me, I'm still a noob with only 4 months into cryptocurrencies. I don't know how to look up transaction id's on block chain explorer.
Here is my transaction ID for my cryptsy withdrawal this saturday morning 5-10-14 USA central time zone at 6:44am : 79d9a6840fc5c02d501f2b1bcebfebfaf74c5878c6afe948eebc199cf66f4a2d
Is it showing up in the blockchain?
I've got to leave for a little while -more people want to see the house. I'll be back in an hour or so.

3r197
Craig

Edit: Just sent 5 coins to cryptsy. Shows that the transaction is pending but so far no confimations. Be back in a few

[wing_hk]

Thanks for letting me know this problem.

I am checking if it's server problem or the recent update stopped old wallet downloading new blocks.

It's midnight for me so I will keep looking into this during weekend.  

[PaulR1]

We are investigating this issue as we speak,however we are confident the new client is not the issue....

I have tweeted cryptsy and i have contacted the builder of the blockchain explorer, a second explorer is being built aswell

update: the blockchain explorer builder will update the site asap.

Thanks for your answer ....

did you look in to the DEV wallet, did you recieve 1 UTC i send to you as a test ?

i recieved 1 utc at 17:07 dutch time

Status: 239 confirmations
Date: 10-5-2014 17:07
From: unknown
To: UV65rd1p2D5TcAihXm4vdSWy89tTLajoEf (own address, label: DONATIONS)
Credit: 1.00 UTC
Net amount: +1.00 UTC
Transaction ID: f25282807f6f1aa962f29b84568a57fb13eef1c6075bf3eda4129f3cb5dc933d


did you send it to an unobtainium adress by accident?

OK thanks Bumface, it was a test sending from my wallet.

So you recieved it ad the DEV donation wallet.

Status: 113 confirmations
Date: 10-5-2014 17:06
To: DEV Team UTC Account UV65rd1p2D5TcAihXm4vdSWy89tTLajoEf
Debit: -1.00 UTC
Transaction fee: -0.00001 UTC
Net amount: -1.00001 UTC
Transaction ID: f25282807f6f1aa962f29b84568a57fb13eef1c6075bf3eda4129f3cb5dc933d

Does this say now the problem has to be at the site of Cryptsy

[primouno]

I think it is the blockchain explorer problem. I've just checked my wallet and the last transaction on the explorer was yesterday but I had three more since that one and they don't appear on explorer site.

[Marnie1976]

UTC block chain explorer stopped updating after block 274056 2014-05-10 00:35:17.

I think it is the blockchain explorer problem. I've just checked my wallet and the last transaction on the explorer was yesterday but I had three more since that one and they don't appear on explorer site.

Yes we all agree  there is a problem at the block chain....
How can this happen that we can not see our transactions at the chain ?

Let it soon be repaired (as I understand Micheal/Bumface is on top of it)

[Marnie1976]

same problem here, i sent 250 coins to cryptsy 2 hrs ago

300+ confirmations in my wallet and zero at cryptsy

OK so more people have the problem.

Did you also contacted Cryptsy for explanation ?

And did you check also your transaction ID in the block chain if the transaction is visible ?

I've reported to cryptsy, will let you know when I get a reply. The blockchain site is down so i can't check, the wallet has over 300 confirmations

And +1, sorry to say but also my deposit today at crypsy is pending and pending and pending and stays at 0 confirmations.

Micheal and DCgirl please hurry with finding answers and get in contact with crypsy

[rapture333]

Hmmm for some reason I'm not able to get over 17Kh/s with my cards. Can someone give me some reference configs I can put into a .bat file and try for the 280x (sapphires). I tried a bunch of combinations with the guide, could it have anything todo with my x32 OS or my 2GB of system RAM?

[jjj0923]

Hmmm for some reason I'm not able to get over 17Kh/s with my cards. Can someone give me some reference configs I can put into a .bat file and try for the 280x (sapphires). I tried a bunch of combinations with the guide, could it have anything todo with my x32 OS or my 2GB of system RAM?

I'm able to get my r9 280x cards up to about 21.7 which is pathetic...

[2014-05-10 21:22:57] GPU0                | (5s):21.45K (avg):21.99Kh/s | A:54 R:0 HW:0 WU:19.6/m                   
 [2014-05-10 21:22:57] GPU1                | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m                   
 [2014-05-10 21:22:57] GPU2                | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m                   
 [2014-05-10 21:22:57] GPU3                | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m   

./cgminer  --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxx.pc4 -p 123 -I 10 -w 312 -g 2 --lookup-gap 2 --gpu-fan 30-75 --temp-cutoff 90 --temp-target 72 --temp-overheat 85 --thread-concurrency 8191  --no-submit-stale --gpu-engine 1200 --gpu-memclock 1500

any ideas would be appreciated - I thought I could do ok with the this coin but I'm better off mining straight scrypt

[seljak]

Hmmm for some reason I'm not able to get over 17Kh/s with my cards. Can someone give me some reference configs I can put into a .bat file and try for the 280x (sapphires). I tried a bunch of combinations with the guide, could it have anything todo with my x32 OS or my 2GB of system RAM?

I'm able to get my r9 280x cards up to about 21.7 which is pathetic...

[2014-05-10 21:22:57] GPU0                | (5s):21.45K (avg):21.99Kh/s | A:54 R:0 HW:0 WU:19.6/m                   
 [2014-05-10 21:22:57] GPU1                | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m                   
 [2014-05-10 21:22:57] GPU2                | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m                   
 [2014-05-10 21:22:57] GPU3                | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m   

./cgminer  --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxx.pc4 -p 123 -I 10 -w 312 -g 2 --lookup-gap 2 --gpu-fan 30-75 --temp-cutoff 90 --temp-target 72 --temp-overheat 85 --thread-concurrency 8191  --no-submit-stale --gpu-engine 1200 --gpu-memclock 1500

any ideas would be appreciated - I thought I could do ok with the this coin but I'm better off mining straight scrypt

...and buying UTC since is so cheap right now 

[jjj0923]

Hmmm for some reason I'm not able to get over 17Kh/s with my cards. Can someone give me some reference configs I can put into a .bat file and try for the 280x (sapphires). I tried a bunch of combinations with the guide, could it have anything todo with my x32 OS or my 2GB of system RAM?

I'm able to get my r9 280x cards up to about 21.7 which is pathetic...

[2014-05-10 21:22:57] GPU0                | (5s):21.45K (avg):21.99Kh/s | A:54 R:0 HW:0 WU:19.6/m                    
 [2014-05-10 21:22:57] GPU1                | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m                    
 [2014-05-10 21:22:57] GPU2                | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m                    
 [2014-05-10 21:22:57] GPU3                | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m    

./cgminer  --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxx.pc4 -p 123 -I 10 -w 312 -g 2 --lookup-gap 2 --gpu-fan 30-75 --temp-cutoff 90 --temp-target 72 --temp-overheat 85 --thread-concurrency 8191  --no-submit-stale --gpu-engine 1200 --gpu-memclock 1500

any ideas would be appreciated - I thought I could do ok with the this coin but I'm better off mining straight scrypt

...and buying UTC since is so cheap right now  

I guess those who can't give answers just give wisecracks...  

[ivanlabrie]

Easy, what os and how much ram?

[3r197]

Hmmm for some reason I'm not able to get over 17Kh/s with my cards. Can someone give me some reference configs I can put into a .bat file and try for the 280x (sapphires). I tried a bunch of combinations with the guide, could it have anything todo with my x32 OS or my 2GB of system RAM?

I'm able to get my r9 280x cards up to about 21.7 which is pathetic...

[2014-05-10 21:22:57] GPU0                | (5s):21.45K (avg):21.99Kh/s | A:54 R:0 HW:0 WU:19.6/m                    
 [2014-05-10 21:22:57] GPU1                | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m                    
 [2014-05-10 21:22:57] GPU2                | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m                    
 [2014-05-10 21:22:57] GPU3                | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m    

./cgminer  --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxx.pc4 -p 123 -I 10 -w 312 -g 2 --lookup-gap 2 --gpu-fan 30-75 --temp-cutoff 90 --temp-target 72 --temp-overheat 85 --thread-concurrency 8191  --no-submit-stale --gpu-engine 1200 --gpu-memclock 1500

any ideas would be appreciated - I thought I could do ok with the this coin but I'm better off mining straight scrypt

I wish I could help you out with your situation. I had problems with cgminer. I went to YaCoin miner. I have 2 R9 290x cards on 32 gig ram Xidax computer with Windows 7.
I had problems mining the coin until I downloaded latest YaCoinminer from thirtybird. Search thirtybird in the bitcoin forum search window (inside this thread) and you will find his latest download version. I'm currently using Yacminer 3.5.0 - My settings are:
yacminer --scrypt-chacha --worksize 128 -g 1 --lookup-gap 4 --buffer-size 3532 -R 10496 --auto-gpu --auto-fan -o stratum+tcp://stratum.ultracoinpool.info:3333 -u craigclaussen.Ultminer -p Mineroneniner --nfmin 4 --nfmax 30 --starttime 1388361600
pause

I raised my lookup-gap on purpose. It just makes my system perform better and with less heat while I mine and multi task on the internet. I'm getting around 57 k/hs per card. It's kind of funny, as both cards seem to maximize K/hs better if I have more applications on my computer running at the same time - weird??
Either way, I have no HW and my reject average is just less than 1%.

Hope this helps! And sorry if it doesn't. So many different configurations to create settings for.

[PaulR1]

@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain


Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain

What can here to be the problem

 

My three deposit's at my Cryptsy account are still Pending and still with zero confirmations  

Now for already more then 13 hours long  

Is it because off the failing block chain

Is it because off faults at Cryptsy

Is it because faults at the new wallet

How many off you have the same problem with sending a UTC deposit to your Cryptsy account  Please do a test and check this ....

[3r197]

@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain


Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain

What can here to be the problem

 

My three deposit's at my Cryptsy account are still Pending and still with zero confirmations  

Now for already more then 13 hours long  

Is it because off the failing block chain
Is it because off faults at Cryptsy
Is it because faults at the new wallet

Paul,

I don't know if you read my edit update but before I stepped out temporarily, I deposited 5 UTC to cryptsy. I'm still waiting on the first confirmation.
So, now that I'm back, I tried to send 5 UTC to deposit in Mintpal as well.
Mintpal accepted them!!! I'm no genius when it comes to blockchain explorer, but shouldn't that help a little with who's currently at fault?
Again, though, I'm a noob... Why is cryptsy faulting on confirmations while mintpal is fine?

[untalented]

guys .. don't worry, cryptsy update wallet and your utc come.

[3r197]

guys .. don't worry, cryptsy update wallet and your utc come.

I agree. They do it all the time.
I'm happy that (so far as I can tell) no one has temporarily lost coin in the process.
I'm sure BigVern will give an updated post about it.

[bumface]

We have listened to the community and this time we offer a .zip file instead of a .rar



http://xwebhosting.org/utc/ultracoin.1.0.3.0-release.zip

or

https://www.dropbox.com/s/7xm1ny6vc9d0ahb/ultracoin.1.0.3.0-release.zip



https://www.dropbox.com/s/939v64ww53bj7on/UltraCoin-Qt-1.0.3.0-Mac.zip



http://www.filedropper.com/ultracoin1030-release
http://www60.zippyshare.com/v/96842336/file.html
http://www.fileswap.com/dl/1VQSY5GOo/



1: make a backup of your wallet.dat file, this file can be found in the appdata folder (windows users type %appdata% in the search box at the start button).

2: delete everything in the appdata/ultracoin folder BUT NOT THE WALLET.DAT

3: download this file XXX and drag the .exe into your wallet folder (not into the appdata/ultracoin folder)

4:click the ultracoin-qt.exe file and it will re download the entire blockchain.

Finished.



Decreased load times by 90%.
Rolled over to ybcoin fork.
Added new databse on intial start of new client.
Added Polish Language pack.
Added POS Start and POW block end heights.
Updated Checkpoints and stake modifiers
New splash.
Logo on wallet added.
Add stake mining checkbox.
RPC call listlatesttx to list latest tx.
Print more stake info while stake reward exceeded.
added support for pool mining in wallet






https://github.com/dx11/ultracoin-2