LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out!

[andre1980]

If someone can tell me how/if it's possible, I'll rip the firmware off my v2 and upload it. Unless it's a bad translation, it sounds like jack wants to send (or sell) you a new controller with the v2 firmware on it.

Check this thread linked in the guide: https://bitcointalk.org/index.php?topic=482352.msg5305449#msg5305449

Couldn't find info in that thread but I did find something that may work elsewhere.  I'll try to rip my v2 firmware tonight and upload it for the masses.

I tried but I couldn't get the controller into failsafe mode.  I tried every which way for both versions of the tplink.  not sure if it's possible to remove failsafe mode from the firmware or not.

I was having a hard time as well with V1.6: ended up removing power, wait for  it to boot up, after 2 blinks pressing reset. Then it starts to blink faster.
For it to connect, i had to connect TP Link directly to pc and give my pc ip 192.168.1.2, subnet 255.255.255.0. Then after enabling telnet (W8.1) "telnet 192.168.1.1" worked!

[1715392845]

1715392845

[1715392845]

1715392845

[1715392845]

1715392845

[1715392845]

1715392845

[juve4v]

My LA3M came with v2 firmware on controller and if you think v2 is better hear this: Everything above 750 Mhz will result in lower performance.In fact the more you try to clock the lower Mhs output will be .AT 900 MHs all miners are red -stopped working .
From what I read it was not the case with v1.Also on v2 miners restart  nevertheless I set them to NEVER restart.

In conclusion:chips are great with high clock potential but  controller sucks probably because of hardware limit -needs more ram ?
I will try run them today on my old EeePC  ubuntu machine as I saw people getting A LOT better  results after ditching this controller no matter if v1 or v2. I don't think the TP link is the best choice as a controller for running 10 or more units even in v7.

[dyland]

My LA3M came with v2 firmware on controller and if you think v2 is better hear this: Everything above 750 Mhz will result in lower performance.In fact the more you try to clock the lower Mhs output will be .AT 900 MHs all miners are red -stopped working .
From what I read it was not the case with v1.Also on v2 miners restart  nevertheless I set them to NEVER restart.

In conclusion:chips are great with high clock potential but  controller sucks probably because of hardware limit -needs more ram ?
I will try run them today on my old EeePC  ubuntu machine as I saw people getting A LOT better  results after ditching this controller no matter if v1 or v2. I don't think the TP link is the best choice as a controller for running 10 or more units even in v7.

Crap....I should have just bought the miners by themselves I guess?

[chasmacd]

My LA3M came with v2 firmware on controller and if you think v2 is better hear this: Everything above 750 Mhz will result in lower performance.In fact the more you try to clock the lower Mhs output will be .AT 900 MHs all miners are red -stopped working .
From what I read it was not the case with v1.Also on v2 miners restart  nevertheless I set them to NEVER restart.

In conclusion:chips are great with high clock potential but  controller sucks probably because of hardware limit -needs more ram ?
I will try run them today on my old EeePC  ubuntu machine as I saw people getting A LOT better  results after ditching this controller no matter if v1 or v2. I don't think the TP link is the best choice as a controller for running 10 or more units even in v7.

Are you getting the promised 500 KHs from V2?  I'm running under Ubuntu and getting 362KHs @ 850 Mhz using cgminer 3.7.2 from https://github.com/dtbartle/cgminer-gc3355

[worldlybedouin]

Are you getting the promised 500 KHs from V2?  I'm running under Ubuntu and getting 362KHs @ 850 Mhz using cgminer 3.7.2 from https://github.com/dtbartle/cgminer-gc3355

I don't recall seeing any v2 user confirm the 500khs rate...

To clarify, it was never "promised", but clearly the way it was marketed did have a number of us interpret it that way.

I'm getting the same performance as you and using the same cgminer.

[rammy2k2]

Hi Jack/asiabtc,

Please consider selling the ATX PCIe cables on their own. How much for 20 including shipping?

Also, I will be interested in the 15 Mh/s scrypt ASIC miner. Any idea on the cost? Please put me on the pre-order list.

price for 15 MH is 11000 USD, based only on pre-orders.

[buckrogers]

How do you place an order here?

[rammy2k2]

How do you place an order here?

contact asiabtc or his team on skype

[sandor111]

If someone can tell me how/if it's possible, I'll rip the firmware off my v2 and upload it. Unless it's a bad translation, it sounds like jack wants to send (or sell) you a new controller with the v2 firmware on it.

Check this thread linked in the guide: https://bitcointalk.org/index.php?topic=482352.msg5305449#msg5305449

Couldn't find info in that thread but I did find something that may work elsewhere.  I'll try to rip my v2 firmware tonight and upload it for the masses.

I tried but I couldn't get the controller into failsafe mode.  I tried every which way for both versions of the tplink.  not sure if it's possible to remove failsafe mode from the firmware or not.

Failsafe mode is disabled in v2 firmware.

[racebyu]

Hi Jack/asiabtc,

Please consider selling the ATX PCIe cables on their own. How much for 20 including shipping?

Also, I will be interested in the 15 Mh/s scrypt ASIC miner. Any idea on the cost? Please put me on the pre-order list.

price for 15 MH is 11000 USD, based only on pre-orders.

Ouch, is that the for sure price?
Seems a bit expensive if the new V2 miners are getting
3.8Mhs just buy 4 sets for $10k?

[johnnyrocket]

I agree, $11k is expensive. $9000-9500 would be good.

[DoomDumas]

I ordered 2 x LA6M from asiabtc!

I paid on Feb 12, with BTC (Jack confirmed payment received)

I got many "will ship soon" and also "will ship today" but

** still no unit, no tracking, last few days no return of emails ***

Please ship or refund. I'm already waiting for way too long...

dear samoshi,
the package has been shipped out on feb27. pls check the dhl 1889723953.
we should do it better to reply all emails and give tracking no at once. and leak of staff.
very sorry for bring your this trouble.
from this week, everything will be more smoothly . the payment, orders will be trackable.new website will be online. web store will work.
thanks.
Jack.

Hi Jack..

Can you give me an update.  Is my order shipped ?

Info sent to the email la.paymenttrack@gmail.com as requested (removed personal info)

2750 / 656 USD (bitstamp actual rate) = 4.19207317 BTC

sending to your btc address : 1LuGGTekcJyj7MEWt22MB52k6LfYaESDpP

TxID : 6aafed133a8070a7fce5f6e8173f79908b1c00c682180e98ba57ee919ecdac91

Order placed Feb 12 !  Hope it has been shipped, or will be really soon !  Some scrypt coin I want to mined had already have more than 10 fold their Diff :/

Thank you for your time !

[asiabtc]

Hi Jack/asiabtc,

Please consider selling the ATX PCIe cables on their own. How much for 20 including shipping?

Also, I will be interested in the 15 Mh/s scrypt ASIC miner. Any idea on the cost? Please put me on the pre-order list.

if you bought the LIGHTNINGASIC miners before, the atx cable is free. just need you pay for the dhl.
thanks.

[asiabtc]

I ordered 2 x LA6M from asiabtc!

I paid on Feb 12, with BTC (Jack confirmed payment received)

I got many "will ship soon" and also "will ship today" but

** still no unit, no tracking, last few days no return of emails ***

Please ship or refund. I'm already waiting for way too long...

dear samoshi,
the package has been shipped out on feb27. pls check the dhl 1889723953.
we should do it better to reply all emails and give tracking no at once. and leak of staff.
very sorry for bring your this trouble.
from this week, everything will be more smoothly . the payment, orders will be trackable.new website will be online. web store will work.
thanks.
Jack.

Hi Jack..

Can you give me an update.  Is my order shipped ?

Info sent to the email la.paymenttrack@gmail.com as requested (removed personal info)

2750 / 656 USD (bitstamp actual rate) = 4.19207317 BTC

sending to your btc address : 1LuGGTekcJyj7MEWt22MB52k6LfYaESDpP

TxID : 6aafed133a8070a7fce5f6e8173f79908b1c00c682180e98ba57ee919ecdac91

Order placed Feb 12 !  Hope it has been shipped, or will be really soon !  Some scrypt coin I want to mined had already have more than 10 fold their Diff :/

Thank you for your time !

hello, Samoshi,
pls contact with dhl for clear custom. here is you package statute:


Friday, March 07, 2014   Location   Time   
28   Clearance event    SAN JOSE - COSTA RICA   08:19   
 
Thursday, March 06, 2014   Location   Time   
27   Clearance event    SAN JOSE - COSTA RICA   10:47   
 
Wednesday, March 05, 2014   Location   Time   
26   Clearance event    SAN JOSE - COSTA RICA   08:04   
 
Tuesday, March 04, 2014   Location   Time   
25   Clearance event    SAN JOSE - COSTA RICA   08:10   
 
24   Clearance processing complete at SAN JOSE - COSTA RICA    SAN JOSE - COSTA RICA   06:06   
 

[asiabtc]

Hi Jack/asiabtc,

Please consider selling the ATX PCIe cables on their own. How much for 20 including shipping?

Also, I will be interested in the 15 Mh/s scrypt ASIC miner. Any idea on the cost? Please put me on the pre-order list.

price for 15 MH is 11000 USD, based only on pre-orders.

Ouch, is that the for sure price?
Seems a bit expensive if the new V2 miners are getting
3.8Mhs just buy 4 sets for $10k?

its different. new model is in rack case. and scrypt only.

[asiabtc]

I agree, $11k is expensive. $9000-9500 would be good.

i hope i can do this price. but very difficulty.

[dyland]

I agree, $11k is expensive. $9000-9500 would be good.

i hope i can do this price. but very difficulty.

If you can, the whole market is there for you.

[DoomDumas]

Hi Jack..

Can you give me an update.  Is my order shipped ?

Info sent to the email la.paymenttrack@gmail.com as requested (removed personal info)

2750 / 656 USD (bitstamp actual rate) = 4.19207317 BTC

sending to your btc address : 1LuGGTekcJyj7MEWt22MB52k6LfYaESDpP

TxID : 6aafed133a8070a7fce5f6e8173f79908b1c00c682180e98ba57ee919ecdac91

Order placed Feb 12 !  Hope it has been shipped, or will be really soon !  Some scrypt coin I want to mined had already have more than 10 fold their Diff :/

Thank you for your time !

You reply to the user I quoted, but not to my inquiry, wich I copy up there !

Thanks

[racebyu]

Hi Jack/asiabtc,

Please consider selling the ATX PCIe cables on their own. How much for 20 including shipping?

Also, I will be interested in the 15 Mh/s scrypt ASIC miner. Any idea on the cost? Please put me on the pre-order list.

price for 15 MH is 11000 USD, based only on pre-orders.

Ouch, is that the for sure price?
Seems a bit expensive if the new V2 miners are getting
3.8Mhs just buy 4 sets for $10k?

its different. new model is in rack case. and scrypt only.

Hi Jack, would it use the same chips as current miners but
with the SHA256 disabled or a new version of the chip?

[asiabtc]

Hi Jack/asiabtc,

Please consider selling the ATX PCIe cables on their own. How much for 20 including shipping?

Also, I will be interested in the 15 Mh/s scrypt ASIC miner. Any idea on the cost? Please put me on the pre-order list.

price for 15 MH is 11000 USD, based only on pre-orders.

Ouch, is that the for sure price?
Seems a bit expensive if the new V2 miners are getting
3.8Mhs just buy 4 sets for $10k?

its different. new model is in rack case. and scrypt only.

Hi Jack, would it use the same chips as current miners but
with the SHA256 disabled or a new version of the chip?

yes. LA15MS is based on gc3355 but diable sha256.